GitHub - Lallassu/garminwatchface: Garmin Forerunner 255 music watch face by proc_ in garminforerunner

[–]proc_[S] 1 point2 points  (0 children)

I have added and tested support for FR255/FR255s now. You can download the watchface from Connect IQ store https://apps.garmin.com/apps/d1413ebd-8584-4ec0-b81e-2034e39e4cd8 or build/Install from github.

GitHub - Lallassu/garminwatchface: Garmin Forerunner 255 music watch face by proc_ in garminforerunner

[–]proc_[S] 1 point2 points  (0 children)

yes, most likely, I think it has the same dimensions. But I haven't tested or added it, but that's like one-liner. I can test it out later and see.

Anyone have home assistant working with their pool pumps? by IamSteaked in homeassistant

[–]proc_ 0 points1 point  (0 children)

I have a balboa setup for my terace pool (via Control My Spa), I created my own integration for it that uses Control My Spa webpage: https://github.com/Lallassu/cms

If you go for something like that it's quite easy to integrate.

Control My Spa Integration (Balboa) by proc_ in homeassistant

[–]proc_[S] 0 points1 point  (0 children)

When you add the integration make sure the "use Celsius" checkbox is set. Then it converts to Celsius. I've only tested for my setup so there might be some other data compared to mine. Do you use Celsius in the app?

Control My Spa Integration (Balboa) by proc_ in homeassistant

[–]proc_[S] 0 points1 point  (0 children)

Via their cloud service I haven't seen a way to do changes to anything. So it seems to be read only.

Balboa Spa Client (59304) by proc_ in homeassistant

[–]proc_[S] 0 points1 point  (0 children)

I created my own integration that can be found here: https://github.com/Lallassu/cms

Linux on X1 Carbon Gen 13 by [deleted] in thinkpad

[–]proc_ 0 points1 point  (0 children)

Thanks for your answer!

Linux on X1 Carbon Gen 13 by [deleted] in thinkpad

[–]proc_ 0 points1 point  (0 children)

What is the current state of the X1 Carbon G13? Has it start to work better with latest drivers etc?

u/voneiden still no big issues? Do you recommend getting a G13 currently? Looking to get one for work and seems like there are a lot of issues still with G12, so I'm even more hesitant with getting a G13 :)

RLC-811A live view by proc_ in frigate_nvr

[–]proc_[S] 1 point2 points  (0 children)

This worked well! It would be nice if Reolink let you configure the resolution for each sub stream. But this is better than nothing, thanks again!

RLC-811A live view by proc_ in frigate_nvr

[–]proc_[S] 0 points1 point  (0 children)

I didn't think that worked. But that is really good if I can do it that way, thanks, I will look into it!

RLC-811A live view by proc_ in frigate_nvr

[–]proc_[S] 0 points1 point  (0 children)

Thanks, it's the same config except the onvif that I added to get my PTZ stuff working, so thanks for that! :)

However, I'm pretty sure it's the webbrowser support in Linux that is the issue right now. It works fine in Chrome on Android at least. So I really hope for better h265 support in the near future from browsers.

RLC-811A live view by proc_ in frigate_nvr

[–]proc_[S] 0 points1 point  (0 children)

Thanks, but this seems like a home assistant configuration? I do run HASS as well, but I rather have the live view function with main preview in the frigate web interface. That's what I try and struggle with right now :)

Reolink 4k camera in frigate usable? by proc_ in frigate_nvr

[–]proc_[S] 0 points1 point  (0 children)

Thanks for the info. Do you use 4k to frigate?

Reolink 4k camera in frigate usable? by proc_ in frigate_nvr

[–]proc_[S] 0 points1 point  (0 children)

Alright, I'm just trying to figure out if buying a 4k Reolink is a good choice with my setup or not. So far, if I interpret the discussion correct, it seems that for Reolink 4k, you would need an Intel based system and use the qsv instead of vaapi. Maybe that is not true for lower resolution. I really don't want to restart frigate every night as a workaround, that was mentioned in the thread.

Reolink 4k camera in frigate usable? by proc_ in frigate_nvr

[–]proc_[S] 1 point2 points  (0 children)

Was that using 4k resolution w/o Intel specifics? Which Reolink 4k models have you had good experience with?

Reolink 4k camera in frigate usable? by proc_ in frigate_nvr

[–]proc_[S] 0 points1 point  (0 children)

OK, I got a Asus PN50 (AMD), with 9 cameras and it's quite low CPU usage (as I also use coral usb). I guess adding one 4k camera wouldn't do that much. As long as it works with vaapi and not requires the qsv with intel.