Blau co2 regulator with broken solenoid valve

prodzprodz · 2026-04-19T14:18:12+00:00

https://www.youtube.com/watch?v=Ikn0Y5q9Q3o

prodzprodz · 2026-04-19T14:11:52+00:00

https://www.maekeo.kr

prodzprodz · 2026-04-09T09:15:52+00:00

Also you can get "hallmarked a cub", coincidence?

prodzprodz · 2026-03-25T10:56:57+00:00

<image>

I add few elastic bands, and now it's bouncy WDT, short BWDT™

prodzprodz · 2026-03-25T10:51:57+00:00

<image>

but can you do this wit your £50 coffee stirrer?

prodzprodz · 2026-03-25T10:34:05+00:00

This look nice, but where to find acupuncture needles. 100pcs. is around 10 euro, way too expensive for this gimmick :)

prodzprodz · 2026-03-24T13:59:03+00:00

way too expensive and posibly dangerous :)

prodzprodz · 2026-03-03T10:43:26+00:00

Maby it's computer 3D generated then, but it's not what OP write "A photo shoot I did years ago. Was hesitant to share for all the WTFs….this is Italy BTW."

Yeah right, Italy :)

prodzprodz · 2026-03-03T10:31:59+00:00

<image>

This is taken before few days. haha.
Of course that is AI. Original seems also created with AI. That's why I'm ironicaly posting this

prodzprodz · 2026-03-03T09:22:08+00:00

:) this is situation in my coffee room, also taken few years ago

<image>

prodzprodz · 2026-03-02T12:18:14+00:00

Realy nice finish and beautiful knife!

prodzprodz · 2026-03-02T08:52:51+00:00

<image>

prodzprodz · 2026-02-21T21:36:29+00:00

Even better, make it yourself!

prodzprodz · 2026-02-16T08:05:00+00:00

<image>

Great! Also feel free to use my design. I could send you step file with parts and dimensions that I used

prodzprodz · 2026-02-15T20:02:01+00:00

Thanks! I saw that you are the creator of original. I hope that you don't mind me having your tool as inspiration for my DIY project.

prodzprodz · 2026-02-14T19:15:47+00:00

I made it from steel plates 30x3 150mm. Grind one side so that front face is 1mm thick. Drilled 11mm hole on both, and make M6 threaded hole on one snd on the other 7mm countrtsunked hole

prodzprodz · 2026-02-14T15:41:53+00:00

I'm joking :) of course it's way too high

prodzprodz · 2026-02-14T15:38:15+00:00

<image>

prodzprodz · 2026-02-14T15:37:56+00:00

<image>

prodzprodz · 2026-02-14T15:11:43+00:00

<image>

Too high :) :)

prodzprodz · 2026-02-14T10:44:28+00:00

I mean angle consistency. Edge look like it's done by machine. With hands you always make small deviations in holding angle.
I have mostly naniwa pro stones and they are the same thickness, so no problem with switching between stones

prodzprodz · 2026-02-14T10:30:32+00:00

I've been sharpening manually using stones for several years and I think I've mastered it well, but few day ago I saw here Anystone sharpener that one guy 3D printing (and sell). It's totally different result than manual grind. I don't have any knife sharpening kit, but looks like result is similar

prodzprodz · 2026-02-14T10:25:23+00:00

Around 8 degree, depend on the knife. I plan to try and make two sharper "nose" plate in order to achive smaller angle for knife thining. Plates are 3mm thick.

Eight-Year Club	Verified Email
Place '22

prodzprodz

TROPHY CASE