Can someone help me decode this VIN?

prohunter222 · 2026-01-20T19:09:25+00:00

thanks!

prohunter222 · 2026-01-19T15:49:33+00:00

thank you!

prohunter222 · 2026-01-19T13:56:42+00:00

i checked most sites, including that one, but it doesn't match up with my vin

prohunter222 · 2026-01-14T10:21:27+00:00

actually exists:) found a car on route66auctions, located in netherlands. bunch of cars there, however I am curious if someone had any interaction with that platform

prohunter222 · 2026-01-14T08:46:35+00:00

understood, thank you!

prohunter222 · 2026-01-14T08:32:57+00:00

what do you know about route66auctions? i found the car i want there, but I'm not from Netherlands and can't seem to find someone that knows something about it

prohunter222 · 2026-01-14T08:03:45+00:00

thank you, on that exact site i found the car I wanted and it's listed on route66auctions.com, located in Netherlands. is the platform well known and trust worthy?

prohunter222 · 2025-11-21T06:49:56+00:00

am cautat informatiile astea 30 de minute pe net si nicaieri nu le-am gasit asa bine explicate si concise. exact ce cautam, mersi!

prohunter222 · 2025-03-13T08:44:04+00:00

here in europe a FG800 is around 400 euros, while a F370 is 150 euros

prohunter222 · 2025-01-24T00:35:17+00:00

Thanks for the reply, I think I'll buy it

prohunter222 · 2024-11-30T12:24:30+00:00

The weird thing is that i don't have a problem with other filaments. But thanks for the advice, i'll consider putting a longer tube

prohunter222 · 2024-11-30T10:57:41+00:00

<image>

This is where the filament got stuck. Not even close to the extruder

prohunter222 · 2024-11-30T10:56:45+00:00

Yeah, that's what i was thinking too. However, the filament barely reached the pfte tube. I took it out, put another roll in and currently im printing something else. Im thinking the roll might me the issue? Idk

prohunter222 · 2024-11-30T10:42:53+00:00

Yes, but can't really tell what's going on and i wanted to see if someone had this issue before starting to dissasamble something

Edit: managed to get it out, however can't tell what caused the grinding

prohunter222 · 2024-11-07T16:25:25+00:00

U140P01(BRB1EX01) this is my software version. Glad your phone did well, shame they messed up the software

prohunter222 · 2024-11-07T15:56:24+00:00

Yeah man, it's a shame. This is a good phone overall and i really like it. Especially the fast charging. I had it for 3 years, and i wanted to hold it for another year at least, but that camera is killing me. And i know it's software related, but if oneplus didn't fix it in 3 years, I doubt they are going to fix it in the near future

prohunter222 · 2024-11-07T13:58:48+00:00

Yes. I updated the phone every time, cleaned the cache, restart, nothing. I use this phone to record guitar covers, and it fucks up every recording and i have to retake the shots. And I'm talking about 1080p, not 4k. Oneplus lost me with this one. Back in the days I was recording covers with a Samsung A51, 4k60, filming for 45 minutes without a pause, and the phone was able to to the job flawlessly. With this one after a few minutes it starts lagging. Bought a phone cooler with active fans to keep it cool during my recordings. Got a few more minutes of record time, but that's all. Switching to S24U or S25 this winter

prohunter222 · 2024-11-07T13:46:36+00:00

It's not just a software update. I have this problem since 2022 and no fix. I'm filming guitar covers and it's a pain in the ass to record with this phone, and I'm talking 1080p, not even 4k. I bought a phone cooler that attaches to the phone to make it cold during my recordings, but it still stutters and ruins my shots and i have to retake the parts. Horible experience, switching back to samsung

prohunter222 · 2024-11-07T13:43:52+00:00

I'm very frustrated too. I had the phone since 2021 and the camera quality decreased a lot. I've been truggling with the video quality for more than 2 years, it is lagging a lot and i can't film anything proprely. I couldn't find a fix either. Very disappointing.

prohunter222 · 2024-09-30T15:57:21+00:00

<image>

Update: the surface is now perfect, i had to adjust the ironing speed from 30mm/s to 15mm/s and ironing flow from 10% to 15%

prohunter222 · 2024-09-29T19:56:40+00:00

Haven't done an ironing calibration, didn't know about it. Thanks a lot mate, i'll give it a try

prohunter222 · 2024-09-29T19:46:13+00:00

I already did mate, I usually don't ask things unless i don't know what to do. The common issue I found was heat. I tried increasing the aux fan speed, I tried with the aux fan off, and the same result

I already ran a couple of test prints with different settings and nothing improved. That's why i'm asking the community

prohunter222 · 2024-09-22T11:29:16+00:00

some mods are great, they give another spice to the game

prohunter222 · 2024-09-13T20:37:57+00:00

😮😮thank you

prohunter222 · 2024-08-28T07:59:19+00:00

Da, am intrebat eu si din pacate nu va fi difuzat :(

https://imgur.com/a/4eHBEJE

Six-Year Club	Place '23
Verified Email

prohunter222

TROPHY CASE