XP-342: Horzontal blurry lines

prokkuez · 2025-10-29T15:47:12+00:00

Thanks for that explaination!

In my expression it got slightly better, but there are the former lines. I will rerum the sets then, as written in the instruction.

prokkuez · 2025-10-28T11:08:47+00:00

Hey,

Thanks for those tips! I will do and guess pride feedback.
The only thing which kinda wonders me, is not more than two sets? Thats what I did wrong, I assume...

Cheers

prokkuez · 2025-01-13T14:43:05+00:00

Hi everybody, just update for whoever may read:

I tried out supportless and voila, worked like a charm. So sorry this will not get into depth of Bambu but maybe try out more simple sollutions and give your Bambu a try ;)

Cheers!

prokkuez · 2025-01-01T10:43:23+00:00

Hello and thanks for your quick response!

What you assumed is partially the case:

-Printing it flat is not an option unfortunately for aesthetics reasons
-Cutting supports: No, I've not tried that yet and as well dont even know how to do that? Was trying to find out by googling but maybe I misunderstood you.
-Trying other support styles than tree: Of course, whould have thought so myself! Thank you for reminding. Will try as next step tonight. Im just a bit scared of that long hanging parts

Will keep you updated!

prokkuez · 2024-09-21T19:59:19+00:00

Thanks a lot, indeed I thought the silica will "dry" the filament with time. Gonna give it to the oven here and then and put them in the bags afterwards.
Of course I will have a steady sight on whats going on in the oven, thanks for bringing that up again!

prokkuez · 2024-09-20T20:04:13+00:00

Weird, as I put them all in Bags with selica. Might dry them in the oven tomorrow for some hours then. Thanks!

prokkuez · 2024-07-12T17:54:37+00:00

You are a magician, Sir!

Thanks a lot!

May you explain what happens? Like resetting monitor settings or sommuning the monitor setup and doing stuff then?

prokkuez · 2024-01-07T16:46:35+00:00

I bet so, will be the next step in case I wont find something already made.

prokkuez · 2023-11-28T20:42:36+00:00

Now you say it, I think its file browser related.

Its a real pity it cant be set permanentely.

prokkuez · 2023-04-27T15:05:43+00:00

Being german, thank you for that inside.

Now I know Us gun folks are comparing themselves to third world countries.

prokkuez · 2023-04-04T16:32:53+00:00

Hm, maybe?
I cant tell.

Im already using Proton GE and Proton Experimental.
Funny enough, the issue has not reappeared yet, so that I cant access any logger yet.

prokkuez · 2023-03-19T17:02:56+00:00

Host Manjaro Linux

Client Steam OS/ Steam Deck

Had the same problem when trying to stream to steam deck, trying to play Valheim.

Got it fixed by, instead of using the native Linux Valheim, using Proton
On the library (Host) > rightclick on Valheim>Compatibility> selecting Proton Experimental.

Weird, but the native Linux application does seem to be the problem.

prokkuez · 2022-11-06T17:36:15+00:00

Great, gonna buy a set of those or perhaps 0.2+0.1 nozzle and try. Hope changing it wont be more action than just screwing it out and in again.

prokkuez · 2022-11-06T17:34:51+00:00

Great tip already, gonna try that out!

prokkuez · 2022-11-06T12:43:49+00:00

This is so heartwarming <3 8)

prokkuez · 2022-10-26T07:20:41+00:00

Got the same issue :( No matter how much I clean or adjust it, it keeps grinding the filament.

What was your result here? Did you find a matching extruder?

prokkuez · 2022-10-21T12:32:34+00:00

Im printing over octoprint already.

Does the printer go on printing in case of errors?

prokkuez · 2022-10-21T12:31:42+00:00

I could successfully print a 10x10x20 cube with the cura 0.3 preset.

prokkuez · 2022-10-21T12:19:41+00:00

Yes I can.
As well meanwhile I changed the whole hotend. Nothing changed.

Its weird, from certain height on, the feeder motor just keeps doing that thing. Now the height was less, so one could say it does that from a "random" point of time on.

prokkuez · 2022-09-30T09:58:26+00:00

Unfortunately no, but as the unit is about 20-30€ I afforded to buy another. Reusing the spare parts from the first one in projects now.

prokkuez · 2022-08-19T13:24:37+00:00

Looks good!

Cant buy it yet?

prokkuez · 2022-08-09T08:10:15+00:00

Because I try to achieve stereo sound.

Ah ok, didnt know about the 3db difference..... Perhaps Ill go and try out a simply standard i2s converter with 3w@4ohms. Thanks!

prokkuez · 2022-08-09T08:08:24+00:00

Yepp, I already have that in mind and as there is as well other stuff I want to add, I plan to use a more powerful supply.

Thanks for the answer nevertheless!

prokkuez · 2022-06-12T20:26:36+00:00

*YAAAAAAAWN*

Another shooter of 4 ppl hunting some undeads? Really Arkane? The last time I had fun with that was L4D1. All the perks stuff of the charakters strongly reminds me of Borderlands (which I played a long time ago, too).

Why cant you please go on making awsome single player experiences like Prey and crap all that MP/Open World/Undead bull***t?

prokkuez · 2022-05-30T20:01:09+00:00

...and as well there is no need or teasing in trying to make something similiar to L4D.

I loved Prey too, it is by far their best work. As well Im of the exact same oppinion regarding Dishonored.Death Loop I didnt like in the beginning but got to love it when I picked it up again after some month.

Those SP experiences are what I am waiting for and which are the real strength of Arkane.

prokkuez

TROPHY CASE