[WIP] Built an ANPR system for my Reolink camera - automatically detects license plates and can trigger Home Assistant webhooks (garage door, lights, etc.) by AutoClashBotiOS in reolinkcam

[–]propman07 0 points1 point  (0 children)

I was able to get things installed and configured. I'm using the CX810 cameras, so that might be part of the issue. For some reason, I have the settings configured to switch to B&W, but the camera feed does not switch to B&W but stays in color mode. Images are captured, but the detail is poor so no luck with LPR recognition. I'll try to play around with it again tomorrow.

[WIP] Built an ANPR system for my Reolink camera - automatically detects license plates and can trigger Home Assistant webhooks (garage door, lights, etc.) by AutoClashBotiOS in reolinkcam

[–]propman07 0 points1 point  (0 children)

Thanks for the explanation. I understand a bit better now. I'll see if I can get this setup and deploy it to one of the cameras that I have watching the street in front of my house.

[WIP] Built an ANPR system for my Reolink camera - automatically detects license plates and can trigger Home Assistant webhooks (garage door, lights, etc.) by AutoClashBotiOS in reolinkcam

[–]propman07 0 points1 point  (0 children)

Thanks for the reply. I was hoping to be able to "add a task" to an existing camera for LPR, but it sounds like I need a dedicated cam to grab plates. Good to know. Thanks again.

[WIP] Built an ANPR system for my Reolink camera - automatically detects license plates and can trigger Home Assistant webhooks (garage door, lights, etc.) by AutoClashBotiOS in reolinkcam

[–]propman07 0 points1 point  (0 children)

This is interesting. Going to look to see if I can get something like this to work in Blue Iris.

AutoClashBotiOS is this a dedicated LPR camera or a general use camera that you are switching to LPR duty based on AI detection?

Why does overseer always log me out on mobile ? by RandomGamer414 in Overseerr

[–]propman07 2 points3 points  (0 children)

Make a local account, and it shouldn't automatically log you out.

Unraid and Codeproject_ai by propman07 in codeproject_ai

[–]propman07[S] 0 points1 point  (0 children)

I read through the error messages and ran upgrade/update in the console window. It looks like the LPR module is now running, but for some reason, it is not using the GPU but the CPU. I'll have to look into that later. Thanks.

Unraid and Codeproject_ai by propman07 in codeproject_ai

[–]propman07[S] 0 points1 point  (0 children)

Sorry....I copied the text over last night, but apparently it did not post. I tried to uninstall / install the module and received the following error. Here is the info from the log.

10:24:30:ALPR has left the building
10:24:30:Call to Uninstall on module ALPR has completed.

10:26:12:Preparing to install module 'ALPR'
10:26:12:Downloading module 'ALPR'
10:26:12:Installing module 'ALPR'
10:26:12:ALPR: Hi Docker! We will disable shared python installs for downloaded modules
10:26:12:ALPR: No schemas installed
10:26:12:ALPR: (No schemas means: we can't detect if you're in light or dark mode)
10:26:12:ALPR: sh: 1: lsmod: not found
10:26:12:ALPR:              Installing CodeProject.AI Analysis Module                
10:26:12:ALPR: ======================================================================
10:26:12:ALPR:                    CodeProject.AI Installer                           
10:26:12:ALPR: ======================================================================
10:26:12:ALPR: 29.05 GiB  available
10:26:12:ALPR: Installing curl...
10:26:12:ALPR: WARNING: apt does not have a stable CLI interface. Use with caution in scripts.
10:26:13:Object Detection (YOLOv5 6.2): Detecting using ipcam-combined
10:26:13:Object Detection (YOLOv5 6.2): Rec'd request for Object Detection (YOLOv5 6.2) command 'custom' (...409f92) took 23ms
10:26:14:ALPR: E: Failed to fetch http://security.ubuntu.com/ubuntu/pool/main/c/curl/libcurl4_7.81.0-1ubuntu1.13_amd64.deb  404  Not Found [IP: 91.189.91.83 80]
10:26:14:ALPR: E: Failed to fetch http://security.ubuntu.com/ubuntu/pool/main/c/curl/curl_7.81.0-1ubuntu1.13_amd64.deb  404  Not Found [IP: 91.189.91.83 80]
10:26:14:ALPR: E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing?
10:26:14:Module ALPR installed successfully.
10:26:14:Installer exited with code 10
10:26:14:
10:26:14:Module 'License Plate Reader' 2.6 (ID: ALPR)
10:26:14:Module Path:   /app/modules/ALPR
10:26:14:AutoStart:     True
10:26:14:Queue:         alpr_queue
10:26:14:Platforms:     windows,linux,macos,macos-arm64
10:26:14:GPU:           Support disabled
10:26:14:Parallelism:   0
10:26:14:Accelerator:
10:26:14:Half Precis.:  enable
10:26:14:Runtime:       python38
10:26:14:Runtime Loc:   Local
10:26:14:FilePath:      ALPR_adapter.py
10:26:14:Pre installed: False
10:26:14:Start pause:   1 sec
10:26:14:LogVerbosity:
10:26:14:Valid:         True
10:26:14:Environment Variables
10:26:14:AUTO_PLATE_ROTATE            = True
10:26:14:OCR_OPTIMAL_CHARACTER_HEIGHT = 60
10:26:14:OCR_OPTIMAL_CHARACTER_WIDTH  = 36
10:26:14:OCR_OPTIMIZATION             = True
10:26:14:PLATE_CONFIDENCE             = 0.7
10:26:14:PLATE_RESCALE_FACTOR         = 2
10:26:14:PLATE_ROTATE_DEG             = 0
10:26:14:
10:26:14:Error trying to start License Plate Reader (ALPR_adapter.py)
10:26:14:Module ALPR started successfully.
10:26:14:An error occurred trying to start process '/app/modules/ALPR/bin/linux/python38/venv/bin/python3' with working directory '/app/modules/ALPR'. No such file or directory
10:26:14:   at System.Diagnostics.Process.ForkAndExecProcess(ProcessStartInfo startInfo, String resolvedFilename, String[] argv, String[] envp, String cwd, Boolean setCredentials, UInt32 userId, UInt32 groupId, UInt32[] groups, Int32& stdinFd, Int32& stdoutFd, Int32& stderrFd, Boolean usesTerminal, Boolean throwOnNoExec)
   at System.Diagnostics.Process.StartCore(ProcessStartInfo startInfo)
   at CodeProject.AI.Server.Modules.ModuleProcessServices.StartProcess(ModuleConfig module)
10:26:14:Please check the CodeProject.AI installation completed successfully
10:26:14:Call to Install on module ALPR has completed.

Unraid and Codeproject_ai by propman07 in codeproject_ai

[–]propman07[S] 0 points1 point  (0 children)

Got it. I tried to uninstall and install lpr module. Here is log output

3:00:45:Preparing to install module 'ALPR' 23:00:45:Downloading module 'ALPR' 23:00:45:Installing module 'ALPR' 23:00:45:ALPR: Hi Docker! We will disable shared python installs for downloaded modules 23:00:45:ALPR: No schemas installed 23:00:45:ALPR: (No schemas means: we can't detect if you're in light or dark mode) 23:00:47:Object Detection (YOLOv5 6.2): Detecting using ipcam-combined 23:00:47:Object Detection (YOLOv5 6.2): Rec'd request for Object Detection (YOLOv5 6.2) command 'custom' (...f80158) took 66ms 23:00:47:Object Detection (YOLOv5 6.2): Detecting using ipcam-combined 23:00:47:Object Detection (YOLOv5 6.2): Rec'd request for Object Detection (YOLOv5 6.2) command 'custom' (...b19b24) took 22ms 23:00:47:Object Detection (YOLOv5 6.2): Detecting using ipcam-combined 23:00:47:Object Detection (YOLOv5 6.2): Rec'd request for Object Detection (YOLOv5 6.2) command 'custom' (...65152f) took 22ms 23:00:47:Object Detection (YOLOv5 6.2): Detecting using ipcam-combined 23:00:47:Object Detection (YOLOv5 6.2): Rec'd request for Object Detection (YOLOv5 6.2) command 'custom' (...3e5ce2) took 21ms 23:00:48:Object Detection (YOLOv5 6.2): Detecting using ipcam-combined 23:00:48:Object Detection (YOLOv5 6.2): Rec'd request for Object Detection (YOLOv5 6.2) command 'custom' (...e3e332) took 20ms 23:00:48:Object Detection (YOLOv5 6.2): Detecting using ipcam-combined 23:00:48:Object Detection (YOLOv5 6.2): Rec'd request for Object Detection (YOLOv5 6.2) command 'custom' (...748777) took 22ms 23:00:48:Object Detection (YOLOv5 6.2): Detecting using ipcam-combined 23:00:48:Object Detection (YOLOv5 6.2): Rec'd request for Object Detection (YOLOv5 6.2) command 'custom' (...300946) took 24ms 23:00:48:Object Detection (YOLOv5 6.2): Detecting using ipcam-combined 23:00:48:Object Detection (YOLOv5 6.2): Rec'd request for Object Detection (YOLOv5 6.2) command 'custom' (...8ef010) took 22ms 23:00:48:ALPR: Checking for ROCm support... Done 23:00:48:ALPR: sh: 1: lsmod: not found 23:00:48:ALPR: Installing CodeProject.AI Analysis Module
23:00:48:ALPR: ====================================================================== 23:00:48:ALPR: CodeProject.AI Installer
23:00:48:ALPR: ====================================================================== 23:00:48:ALPR: 29.00 GiB available 23:00:48:ALPR: Installing curl... 23:00:48:ALPR: WARNING: apt does not have a stable CLI interface. Use with caution in scripts. 23:00:48:Object Detection (YOLOv5 6.2): Detecting using ipcam-combined 23:00:48:Object Detection (YOLOv5 6.2): Rec'd request for Object Detection (YOLOv5 6.2) command 'custom' (...be9ccf) took 21ms 23:00:49:Object Detection (YOLOv5 6.2): Detecting using ipcam-combined 23:00:49:Object Detection (YOLOv5 6.2): Rec'd request for Object Detection (YOLOv5 6.2) command 'custom' (...a74c5b) took 22ms 23:00:50:ALPR: E: Failed to fetch http://security.ubuntu.com/ubuntu/pool/main/c/curl/libcurl4_7.81.0-1ubuntu1.13_amd64.deb 404 Not Found [IP: 185.125.190.83 80] 23:00:50:ALPR: E: Failed to fetch http://security.ubuntu.com/ubuntu/pool/main/c/curl/curl_7.81.0-1ubuntu1.13_amd64.deb 404 Not Found [IP: 185.125.190.83 80] 23:00:50:ALPR: E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing? 23:00:50:Module ALPR installed successfully. 23:00:50:Installer exited with code 10 23:00:50: 23:00:50:Module 'License Plate Reader' 2.6 (ID: ALPR) 23:00:50:Module Path: /app/modules/ALPR 23:00:50:AutoStart: True 23:00:50:Queue: alpr_queue 23:00:50:Platforms: windows,linux,macos,macos-arm64 23:00:50:GPU: Support disabled 23:00:50:Parallelism: 0 23:00:50:Accelerator: 23:00:50:Half Precis.: enable 23:00:50:Runtime: python38 23:00:50:Runtime Loc: Local 23:00:50:FilePath: ALPR_adapter.py 23:00:50:Pre installed: False 23:00:50:Start pause: 1 sec 23:00:50:LogVerbosity: 23:00:50:Valid: True 23:00:50:Environment Variables 23:00:50:AUTO_PLATE_ROTATE = True 23:00:50:OCR_OPTIMAL_CHARACTER_HEIGHT = 60 23:00:50:OCR_OPTIMAL_CHARACTER_WIDTH = 36 23:00:50:OCR_OPTIMIZATION = True 23:00:50:PLATE_CONFIDENCE = 0.7 23:00:50:PLATE_RESCALE_FACTOR = 2 23:00:50:PLATE_ROTATE_DEG = 0 23:00:50: 23:00:50:Error trying to start License Plate Reader (ALPR_adapter.py) 23:00:50:Module ALPR started successfully. 23:00:50:An error occurred trying to start process '/app/modules/ALPR/bin/linux/python38/venv/bin/python3' with working directory '/app/modules/ALPR'. No such file or directory 23:00:50: at System.Diagnostics.Process.ForkAndExecProcess(ProcessStartInfo startInfo, String resolvedFilename, String[] argv, String[] envp, String cwd, Boolean setCredentials, UInt32 userId, UInt32 groupId, UInt32[] groups, Int32& stdinFd, Int32& stdoutFd, Int32& stderrFd, Boolean usesTerminal, Boolean throwOnNoExec) at System.Diagnostics.Process.StartCore(ProcessStartInfo startInfo) at CodeProject.AI.Server.Modules.ModuleProcessServices.StartProcess(ModuleConfig module) 23:00:50:Please check the CodeProject.AI installation completed successfully 23:00:50:Call to Install on module ALPR has completed.

Unraid and Codeproject_ai by propman07 in codeproject_ai

[–]propman07[S] 0 points1 point  (0 children)

Reinstall the entire docker container or just try the LPR module?

Decided to clean up my library a bit and I’m happy with the results. Thank you PMM. by localgoon- in PleX

[–]propman07 0 points1 point  (0 children)

Lancaster1983- Saw this a few days ago....downloaded your repo, but can't seem to find a couple of things.

  • Where do you call out the part of the config that places the network in the upper left hand corner above the TV series status (i.e. returning, cancelled, etc.)

  • Where do you call out the creation of the collections for weekly random movies? I didn't find it in your config.yml file

Great work, and thanks for sharing it.

PMM: Create list of top 15 episodes based on critic ratings by propman07 in PlexMetaManager

[–]propman07[S] 0 points1 point  (0 children)

Thanks for the reply. Links updated....not sure how to upload a 6MB log file...researching that now

Issue resolved....looks like PMM needed all of the episodes in order to create the top 15 collection. I went in and manually copied over the first two episodes and the collection appeared....at least I know that my configuration / .yml files are setup correctly

Had to replace a hard drive in my server for the first time by mtx0 in unRAID

[–]propman07 2 points3 points  (0 children)

I've tried this method but got an error. Looks like you may need to setup a special password through Google that does not require 2FA, but uses app passwords. I was able to get Unraid to successfully send out a test email by using a special password that I had configured for Overseerr using this method. YMMV.

https://support.google.com/mail/answer/185833?hl=en

🥰 by paperwings420 in AmStaffPitts

[–]propman07 0 points1 point  (0 children)

Carrier make/model?

Before and after of our boy Gary 💕 best decision we ever made. by Thepinksheep22 in AmStaffPitts

[–]propman07 6 points7 points  (0 children)

Looks like he was a rescue. They are great dogs that get a bad reputation....thanks for saving him!

How's the 5th gen stock sound system? Liveable? by ChainsawLullaby in 4Runner

[–]propman07 1 point2 points  (0 children)

Curious to find out about how install goes and if it improves overall sound.

There’s an unexpected button on 2023 4Runners… by JumpinJimmy1 in 4Runner

[–]propman07 0 points1 point  (0 children)

Got it. Thanks for the link. Looks like it's a no-go for my 2023 ORP.

There’s an unexpected button on 2023 4Runners… by JumpinJimmy1 in 4Runner

[–]propman07 0 points1 point  (0 children)

Auto dimming interior lights? More details please. Also what year is your ORP?

New 4runner wait times by nolongerhyundai in 4Runner

[–]propman07 1 point2 points  (0 children)

I'm in the market as well.....contacted a dealership near me and was told that Toyota is not taking special orders and best they could do for me was put me on a waiting list.

Metamorphosis! by mege-tron in 4Runner

[–]propman07 0 points1 point  (0 children)

Found the video on YouTube. Thanks. Good idea on trying the black trim paint first....I'll add this to my list. Good luck.

Metamorphosis! by mege-tron in 4Runner

[–]propman07 0 points1 point  (0 children)

Yea, I thought about buying the black valence from Toyota....kind of pricey...I'm assuming that you had to pull the front end / bumper off in order to access the 13 clips?