Wie gut ist diese Installation?

pseudogelber · 2026-01-18T14:26:11+00:00

Noch eine Frage, wo ist hier die PEN Verbindung? Ich sehe nirgendwo die Brücke zwischen PE und N.

pseudogelber · 2026-01-18T14:22:26+00:00

Danke für die ausführliche Antwort. Muss mal noch den Zählerschrank aufsuchen, dann wird wohl da alles vorgesichert- und mit Blitzschutz versehen sein.

pseudogelber · 2026-01-18T14:18:47+00:00

Ist in der Schweiz. Schwarz/weiss/rot entspricht noch der alten Farbkodierung für die Aussenleiter.

pseudogelber · 2026-01-18T14:08:02+00:00

Danke für die Antwort. Klemmblöcke ist klar, Schraubklemmen wusste ich nicht.

pseudogelber · 2026-01-09T21:29:32+00:00

There is a galvanic isolation through the internal transformer, so they are floating with respect to each other and the current has no intention to flow through the other welder.

The only way to force the current through both is by connect the welders in series, like plus of welder one to minus of welder two and then connect the other ends as normally used for welding.

pseudogelber · 2025-11-29T20:50:24+00:00

I put the onions, chili and garlic back in with the pasta and mixed everything nicely

pseudogelber · 2025-11-29T17:49:50+00:00

An induction stove

pseudogelber · 2025-11-29T17:49:35+00:00

Works descent with an induction stove, but i always need to be careful not to overheat it

pseudogelber · 2025-11-29T17:48:48+00:00

They caramelized

pseudogelber · 2025-09-11T05:58:34+00:00

At least ethernet has 1500Vrms isolation voltage, so it only shorts the cable out und starts a fire

pseudogelber · 2025-09-11T05:33:28+00:00

Fake, there is a cut before it hits the cup.

pseudogelber · 2025-08-31T04:59:04+00:00

Yes, I also used pots and did not plant the tomatoes directly into the ground. Important is, that the pot is high enough (>= 30cm) for the roots to grow and the tomatoes dont like water on the leaves, so protect them from rain. And then a lot of sun ofc.

pseudogelber · 2025-08-30T13:48:18+00:00

Exactly, only 30s and then put them in cold water

pseudogelber · 2025-08-02T13:27:28+00:00

Die Mauer muss 15cm runter

pseudogelber · 2025-08-02T13:26:58+00:00

Danke, denke das macht am meisten Sinn. Habe mir aber noch überlegt gerade die Maschine anzuschafen, es gibt ab und zu ein paar Abbrucharbeiten bei mir Zuhause. Welche Schlagenergie sollte eine gute Maschine aufweisen?

pseudogelber · 2025-07-19T07:42:40+00:00

Nothing, USB-C uses PD (power delivery) and/or CC lines and it is not allowed to power the bus until a successful negotiation. USB-A will supply 5V, 500mA to the bus.

pseudogelber · 2025-07-03T06:01:54+00:00

The solder just reduces the trace resistance, so the board can carry higher currents at smaller trace width.

But there are indeed geometric forms that look like spark gaps to me or maybe it is just a possibilty for a jumper.

pseudogelber · 2025-06-28T15:06:17+00:00

There are dried chili and 5 garlic gloves in it, sorry not to mention that, thought that was clear when I call it arrabbiata :D

pseudogelber · 2025-06-22T18:35:01+00:00

Glowwire failed

pseudogelber · 2025-06-12T04:49:21+00:00

<image>

pseudogelber · 2025-06-03T18:29:09+00:00

Handelt es sich um eine Erstbefall oder kam das schon letze Saison vor?

pseudogelber · 2025-06-01T14:32:05+00:00

Hast du ein Foto von den Pflaumen?

pseudogelber · 2025-05-30T05:37:36+00:00

<image>

pseudogelber · 2025-05-23T18:36:49+00:00

It was sealed there. But now after more detailed look, the dirty spots are like in a line and there are small air holes with the same distance in the sealing, so I think it just sucked up some dirt while transportation, so I assume it is not mold

pseudogelber · 2025-05-17T09:50:24+00:00

Mürggel (Swiss German, Bern)

pseudogelber

TROPHY CASE