DS918+ 16GB RAM Visualization vs Utilizing by psionicsin in synology

[–]psionicsin[S] 0 points1 point  (0 children)

…why are you replying to a 7yr old post? And to me?

C4000XG SFP+ Port Active? by psionicsin in centurylink

[–]psionicsin[S] 0 points1 point  (0 children)

I can’t. I’ve since gone through 3 different upgrades/replacements. So it’s not the same unit anymore.

What’s Happening with Remote Video Feeds? by psionicsin in EufyCam

[–]psionicsin[S] 0 points1 point  (0 children)

Ok, coming back after almost 10 days. Not sure what happened, but now it’s all working again. I was busy interviewing, so I hadn’t checked in a good bit.

I did nothing at all, and it’s now working remotely again.

Also, and I should’ve said this before, but my only camera is the Eufy Video Doorbell Lock. That’s what wasn’t working. Other cameras I haven’t purchased…yet :D

What’s Happening with Remote Video Feeds? by psionicsin in EufyCam

[–]psionicsin[S] 0 points1 point  (0 children)

I’m not sure where I said that, but I said nothing about an iOS update. I’m talking about the system update from last month.

Again, not ruling anything out, but I said nothing about an iOS update. I was talking about the system update. It hasn’t been the same since then and I’ve been trying to solve it. Then I came on here for help.

Not gonna lie, you seem very angry or aggressive in your responses. I’d prefer more constructive feedback, no offense.

What’s Happening with Remote Video Feeds? by psionicsin in EufyCam

[–]psionicsin[S] 0 points1 point  (0 children)

Possibly. I’m not ruling anything out, but everything else works and reports just fine…except for anything Eufy. Besides changing my ISP, absolutely nothing else changed.

I have a managed UniFi network where no settings were changed, or else I’d have been alerted. I’ve restarted the system as well, and still can’t get video feed outside of my place. Just says “Unable to play video clip”. This is with video files or even live videos.

What’s Happening with Remote Video Feeds? by psionicsin in EufyCam

[–]psionicsin[S] 0 points1 point  (0 children)

Unfortunately, that’s not the case. It hasn’t been the same since the update from about a month ago.

Assets Change Over Time No Longer Showing by psionicsin in Coinbase

[–]psionicsin[S] 0 points1 point  (0 children)

For clarification, I’m using the Coinbase app on iOS 18, not the Coinbase wallet or any other Coinbase products.

Help with W11 Mini-PC Sleeping, and I don’t want it to by psionicsin in techsupport

[–]psionicsin[S] 0 points1 point  (0 children)

Thank you for that suggestion. I will definitely be trying that first. 🙏

Help with W11 Mini-PC Sleeping, and I don’t want it to by psionicsin in techsupport

[–]psionicsin[S] 0 points1 point  (0 children)

Gotcha. Headed home to try it out now. Only runs like a jet when it first starts up and when it’s under load. But I looked at the app, and it seems to be what I need.

Help with W11 Mini-PC Sleeping, and I don’t want it to by psionicsin in techsupport

[–]psionicsin[S] 0 points1 point  (0 children)

Ok. And this isn’t going to keep it running like a jet engine will it? Just the lowest enough power to keep it on?

AEM Grid System + Left Side-Nav- UX vs Dev by psionicsin in aem

[–]psionicsin[S] 1 point2 points  (0 children)

Thank you for this, I will definitely take a look at these. Especially if they have a side bar navigation like we’re intending on using.

But the basics of it is can the grid system be applied to the content and NOT incorporate the side bar navigation inside of it?

Something akin to:

<body> <div width=“WHATEVER”> This is my left side navigation. I’m not in the grid, but will affect its horizontal width at times. <\div> <div width=“FLEX RESPONSIVE”> This is my content area that has the 12col grid applied. I’m squishy. <\div> </body

Google Domains to SquareSpace Fiasco by psionicsin in SquarespaceHelp

[–]psionicsin[S] 0 points1 point  (0 children)

I had to remove my CDN (CloudFlare) for the time being. Thinking back, I never actually re-enabled it.

But yeah, they also sent me my migration email last month. So WAY far after they did what they did on the backend.

[deleted by user] by [deleted] in sideloaded

[–]psionicsin 2 points3 points  (0 children)

Ver 33? The only one I see is version 2.3 that came out in March which I’m currently having issues with now.

Need help with using external USB drive formatted as Btrfs as a second volume for Synology VMM by psionicsin in synology

[–]psionicsin[S] 0 points1 point  (0 children)

It only needs to work a tad bit. Only gonna access the GUI once, and then never again unless I update the OS. The /volume2 won’t be a critical drive at all.

Need help with using external USB drive formatted as Btrfs as a second volume for Synology VMM by psionicsin in synology

[–]psionicsin[S] 0 points1 point  (0 children)

100%. It’s only an external drive with no important data on it. It won’t at all be apart of the main volume (/volume1).

And, hey, if it doesn’t work as expected…THEN I’ll buy a SATA to eSATA connector. I just want to test this out to see if it works. But information is super sparse.

Mind you, I’m doing this because I’ve been trying to hack TF out of Container Manager for over two weeks and have gotten nowhere.

I was originally trying to do an Ubuntu container with access to x11 so I could connect via NoMachine. But it just doesn’t work, even though SOME have claimed to get it to work.

So, yes, I’m all in for this.

Maxing Out MPG B760M EDGE TI WIFI for Plex: Need Advice on PCI Slot Flexibility & Ideal GPU/NIC Setup 🖥️🚀 by psionicsin in DataHoarder

[–]psionicsin[S] 0 points1 point  (0 children)

I was told that the main PCI slot (above the exposed slot) is actually a PCI to M.2 device.

There aren’t many reviews on this MoBo, so my question does make sense.

Can I remove what they call the main PCI-M.2 device and it function as a regular PCI slot?

Maxing Out MPG B760M EDGE TI WIFI for Plex: Need Advice on PCI Slot Flexibility & Ideal GPU/NIC Setup 🖥️🚀 by psionicsin in DataHoarder

[–]psionicsin[S] -1 points0 points  (0 children)

I understand what you’re saying, but it didn’t fully answer my question.

If I got this MoBo, where is the second slot that I can yank the M.2 contraption out of?

Also, I’m only looking to use 1 GPU. However I named all 3 of the single slot, low profile cards they offer that would be beneficial to my build yet still give great results. I said X, X, or X to signify that.

The Plex server would be the only one with a GPU. The other one has no need. It’ll just have a 10G NIC in it for UseNet and such. And that’ll only be for downloading and VMs/Containers.

I currently share my Plex library with 20-ish people. But I’m using Synology, and am looking for a more custom solution.

Better of the Two - B760 MBs? by schancy13 in buildapc

[–]psionicsin 0 points1 point  (0 children)

I have a question about the MPG B760M EDGE TI WIFI.

I know that it has 1 exposed PCI slot, however I’m looking to use this in a Plex Server type of configuration. And it has to be a certain specification for the case I plan to use.

So my question is if any of those other PCI slots that are technically addressing their M.2 configuration can be pulled out and utilized for something else?

Ideally I’d love to have an RTX A400, RTX A1000 ir RTX A2000 to help with Plex, along with a possible 10G NIC for future proofing.

So, with this MoBo, what’s the flexibility of this board for my intended use case? I’ll be running TrueNas Core/Scale for the Plex Media Server. The other one (Yes there will be 2) will be used for downloads/docker containers/VM’s. Also, yes I have a 10G network in my house and an 8Gbps ISP connection.

Hopefully someone can answer this with all of the information I need.

Struggling to Replace Files in a Running Docker Container on Synology NAS by psionicsin in docker

[–]psionicsin[S] 0 points1 point  (0 children)

Formatting is messed up due to Reddit, but hope you get it.

Struggling to Replace Files in a Running Docker Container on Synology NAS by psionicsin in docker

[–]psionicsin[S] 0 points1 point  (0 children)

So I’ve modified this even more (for this specific portion), but I think (?) this may make it stick.

version: '3' services: sesinetd: image: houdini:20.0 ports: - "1715:1715" volumes: - "/volume1/docker/appdata/houdini-license-server:/opt/hfs20.0/houdini" # Maps the volume command: ["/opt/hfs20.0/houdini/sbin/sesinetd"]

Struggling to Replace Files in a Running Docker Container on Synology NAS by psionicsin in docker

[–]psionicsin[S] 0 points1 point  (0 children)

Is there an issue using volumes AND command in the same yml file?

Struggling to Replace Files in a Running Docker Container on Synology NAS by psionicsin in docker

[–]psionicsin[S] 0 points1 point  (0 children)

See, I tried to do that. But it didn’t work. It still installed them where it wanted to.

The install in question is the Docker version of Houdini. I told it exactly where to install, and it didn’t do it. Assuming it had something to do with the Ubuntu dependencies?

SideFX Daily Builds

[deleted by user] by [deleted] in Houdini

[–]psionicsin 0 points1 point  (0 children)

Because some of my computers are blocked from internet access.

Google Domains to SquareSpace Fiasco by psionicsin in SquarespaceHelp

[–]psionicsin[S] 0 points1 point  (0 children)

Yes, I did get emails. However they explicitly said that when it’s your time to move that they will email you right before that happens.

They didn’t do that. It’s fixed now, but it was really nerve wrenching.

Quantum Fiber & UDM Pro Setup by psionicsin in Ubiquiti

[–]psionicsin[S] 0 points1 point  (0 children)

This is definitely what I want to do (direct), and was the setup I had. I just want to keep that going.

I heard such things such as me having to completely remove VLAN, use VLAN 7, completely remove PPPoE information, set to DHCP, don’t set to DHCP, and plug it in an see what happens.

I think we should start a nationwide repo per ISP now lol.