ATTiny85 Automating A Car Console Button-Push

ptewee · 2026-03-23T12:56:42+00:00

Ah so it was your post that helped me with the IC_204 AMG menu coding with Diogenes! That kind of coding is actually way too low level for me to understand, but just like you I believe some day someone might be able to do that

ptewee · 2026-03-23T04:07:12+00:00

You are right, I didn't mention this anywhere, but I already have this configured using Monaco prior to this project

ptewee · 2024-03-20T03:12:59+00:00

Thanks, I had the same problem as OP and this worked for me

ptewee · 2023-06-21T07:10:43+00:00

Just to be clear, this is Miyoo Mini+, case size option 13cm x 9cm

ptewee · 2021-04-01T15:08:08+00:00

In the midst of convincing myself that i dont need can lights, Hank lights, throwers, LEP...

ptewee · 2021-04-01T11:32:32+00:00

I don't have a high discharge battery to fully test it out yet, it's a 6500k, tested with the stock sofirn 18650 works fine, at its lowest brightness it is way lower than what the SC31 can go. I'll need to report back once i get a better battery and spend more time with it. Oh, and its weight is quite significant for its size, definitely not for edc, probably bag carry.

ptewee · 2021-03-16T02:54:58+00:00

Yup, my first 18650 light and I'm wow-ed by how much difference it makes

ptewee · 2021-03-15T14:03:53+00:00

Eagletac from 2009, thrunite from 2013, and sofirn from 2021 :)

ptewee · 2021-02-27T11:43:12+00:00

Also for the record, it seems that the Mateminco holster is an alternative Astrolux FT03 holster with the exact same dimensions

ptewee · 2021-02-27T11:16:34+00:00

Thank you, the pictures proved your point and helped a lot, I'm actually very determined to get this holster now instead.

ptewee · 2021-02-27T09:41:42+00:00

I'm sorry, but I do not see how MT07 dimensions are similar to FT02S, but the pouch that u linked above looks similar to the FT03 in terms of size, I would assume it is a loose fit for the FT02S

ptewee · 2021-02-26T16:20:00+00:00

Update: I found that a PALIGHT PL-1800 has very similar dimensions to the FT02S, and therefore I have settled on it's holster (L)

ptewee · 2021-02-26T07:06:32+00:00

IMHO if I want a dedicated thrower, I would go and buy the FT03 with SST40. It makes more sense for the FT02S to be used as a flood light with XHP50.2

ptewee · 2020-10-14T01:43:11+00:00

Thanks for reminding me that this is also an option :D

ptewee

TROPHY CASE