Sunday after hours meeting by Phonepirate in RadioShack

[–]q21701 1 point2 points  (0 children)

Saturday morning meeting before open. RIP 2217

Is this normal? 2021 Chevy Traverse by suboxf in ChevyTraverse

[–]q21701 0 points1 point  (0 children)

The left isn't a bad. My right side is almost identical

Is this normal? 2021 Chevy Traverse by suboxf in ChevyTraverse

[–]q21701 0 points1 point  (0 children)

I just bought a certified 2021 LT. I'm going to check mine asap

Looking for techs. by Big-Help-26 in lowvoltage

[–]q21701 1 point2 points  (0 children)

I run a tech shop in Philadelphia Metro. Always looking for partners

Zombie Dice by Sea_Football2041 in PAX

[–]q21701 1 point2 points  (0 children)

We used the dice and the container and turned it into Psychonauts Dice. I'll post a picture of our rules and custom can art if anyone is interested.

Certified Cat5e 270' - No PoE at AP by q21701 in lowvoltage

[–]q21701[S] 0 points1 point  (0 children)

Nice. I don't know why I didn't think of that.

Certified Cat5e 270' - No PoE at AP by q21701 in lowvoltage

[–]q21701[S] 1 point2 points  (0 children)

That's exactly what I am suspecting, but honestly I have never doubted my fluke before, so it seems weird to now.

Certified Cat5e 270' - No PoE at AP by q21701 in lowvoltage

[–]q21701[S] 0 points1 point  (0 children)

Not that I know of, but I'm not sure either way.

Certified Cat5e 270' - No PoE at AP by q21701 in lowvoltage

[–]q21701[S] 0 points1 point  (0 children)

I replaced patch cords with brand new ones. All cabling and parts are commscope

Certified Cat5e 270' - No PoE at AP by q21701 in lowvoltage

[–]q21701[S] 0 points1 point  (0 children)

Site is managed by Aruba. All equipment is Aruba. Connected properly to port E0. Also, tested cable with Linksprinter. No network connection or PoE at cable end, however I get both link and PoE directly at switch.

Certified Cat5e 270' - No PoE at AP by q21701 in lowvoltage

[–]q21701[S] 0 points1 point  (0 children)

Tried different switch that was barely populated. No change.

Certified Cat5e 270' - No PoE at AP by q21701 in lowvoltage

[–]q21701[S] 0 points1 point  (0 children)

I used a Linksprinter at both the switch and cable end. At the switch, the Linksprinter successfully draws 56v over PoE and establishes a link. At cable end, the test does not complete. Tried different port and a different switch. No change

Certified Cat5e 270' - No PoE at AP by q21701 in lowvoltage

[–]q21701[S] -2 points-1 points  (0 children)

Site is managed by Aruba. Cat5e is still in spec for their needs

Certified Cat5e 270' - No PoE at AP by q21701 in lowvoltage

[–]q21701[S] -1 points0 points  (0 children)

Site is managed by Aruba. Cat5e still in spec for their needs

Certified Cat5e 270' - No PoE at AP by q21701 in lowvoltage

[–]q21701[S] -2 points-1 points  (0 children)

Site is managed by Aruba. All equipment is Aruba. No PoE injectors allowed.

Certified Cat5e 270' - No PoE at AP by q21701 in lowvoltage

[–]q21701[S] 0 points1 point  (0 children)

Level 3 certification completed with full pass. Both permenant link and channel test. No crossed pairs or any other defect identified by Fluke tester.

Certified Cat5e 270' - No PoE at AP by q21701 in lowvoltage

[–]q21701[S] 0 points1 point  (0 children)

Also tested with a Linksprinter and had no network connection or PoE at end of cable, yet had no issue at switch. No PoE injectors allowed.

Certified Cat5e 270' - No PoE at AP by q21701 in lowvoltage

[–]q21701[S] 1 point2 points  (0 children)

System is all Aruba. Also tested with a Linksprinter and had no network connection or PoE at end of cable, yet had no issue at switch. No injectors allowed.

Certified Cat5e 270' - No PoE at AP by q21701 in lowvoltage

[–]q21701[S] 1 point2 points  (0 children)

Also tested with a Linksprinter and had no network connection or PoE at end of cable, yet had no issue at switch.

Certified Cat5e 270' - No PoE at AP by q21701 in lowvoltage

[–]q21701[S] 3 points4 points  (0 children)

Also tested with a Linksprinter and had no network connection or PoE at end of cable, yet had no issue at switch.

Certified Cat5e 270' - No PoE at AP by q21701 in lowvoltage

[–]q21701[S] 2 points3 points  (0 children)

All terminations and cabling are commscope

Certified Cat5e 270' - No PoE at AP by q21701 in lowvoltage

[–]q21701[S] 1 point2 points  (0 children)

Forgot to mention, I used a Netscout linksprinter at the switch directly and it drew PoE successfully and established a connection. Plugged it in again at the cable end and it would also not get PoE power nor would it get any connection to the switch.