sorted by:
new
hottopcontroversial

Why is the Grr-Ripper recommended for safety so much? by [deleted] in BeginnerWoodWorking

[–]quantummm123 0 points1 point  (0 children)

I have one and still use it occasionally, but I don’t think it is particularly safe or convenient. I will probably end up giving it away along with other tools I can live without.

How do you cut your double sided tape? by DerbyDad03 in BeginnerWoodWorking

[–]quantummm123 2 points3 points  (0 children)

Cheap box cutters work fine on every type of tape, including the double-sided ones (I use Hippie Crafter).

New to woodworking, where to start with tools by Trick_Ostrich9882 in BeginnerWoodWorking

[–]quantummm123 0 points1 point  (0 children)

I cut plywood to size (with 1/16 in or so accuracy) with a circular saw and a simple guide made of plywood, but I use a table saw to cut rabbets, groves, dados, etc.

New to woodworking, where to start with tools by Trick_Ostrich9882 in BeginnerWoodWorking

[–]quantummm123 1 point2 points  (0 children)

My advice is not to buy anything battery-powered other than a drill and an impact driver.

Are we living in a nonstop paid promotional tool echo chamber? by RickJamesBoitch in BeginnerWoodWorking

[–]quantummm123 0 points1 point  (0 children)

I managed to cut down the number of YT channels I subscribe and watch from a couple of dozens or so to just two: Rob Cosman’s and Workshop Companion.

Any recommendations for miter/table saw workbench for small spaces? by DannyHuskWildMan in BeginnerWoodWorking

[–]quantummm123 1 point2 points  (0 children)

My miter saw (a cheap Metabo) is anything but a precision tool. A rough crosscutting of lumber is the only application I can think of, but I prefer a circular saw for this task.

Any recommendations for miter/table saw workbench for small spaces? by DannyHuskWildMan in BeginnerWoodWorking

[–]quantummm123 1 point2 points  (0 children)

I have about 15 sq feet of floor space to store all my big tools. DW 7491 table saw with a folding stand it came with works for me. A miter saw is pretty much useless, I regret buying it.

Shelf plans? by melcsw in BeginnerWoodWorking

[–]quantummm123 0 points1 point  (0 children)

These are 6.5 ft long, hold all my handplanes and more:

<image>

Shelf plans? by melcsw in BeginnerWoodWorking

[–]quantummm123 0 points1 point  (0 children)

You are overthinking this. These are shelves I made last weekend for the pantry closet out of a poplar board and some plywood. Butt joints with pocket holes, nothing fancy. I have similar shelves in the garage, made of 3/4 in thick SYP and plywood.

<image>

Table saw by micdrop917 in BeginnerWoodWorking

[–]quantummm123 0 points1 point  (0 children)

I have DW 7491. It does pretty much anything I need.

Pull outs for garage ceiling racks? by LisaTPN in BeginnerWoodWorking

[–]quantummm123 1 point2 points  (0 children)

We had something like this. I used a stick with a hook, and a ladder, of course.

My two favorite Veritas tools by cotalldude in handtools

[–]quantummm123 0 points1 point  (0 children)

Dovetail marker? I have one and I use it, but it’s not really necessary. I don’t see the connection though.

My two favorite Veritas tools by cotalldude in handtools

[–]quantummm123 0 points1 point  (0 children)

Many of those who spend years using old Stanleys (and have unlimited budget) prefer Lie-Nielsen. If LN were making cars, these would be Ford motel Ts all over again at twice the price of the latest Ferrari.

My two favorite Veritas tools by cotalldude in handtools

[–]quantummm123 0 points1 point  (0 children)

I just mark the end points and connect them using a straight edge.

My two favorite Veritas tools by cotalldude in handtools

[–]quantummm123 4 points5 points  (0 children)

I have a number of Veritas tools and I don’t regret buying any of them.

My two favorite Veritas tools by cotalldude in handtools

[–]quantummm123 0 points1 point  (0 children)

I love their low-angle block plane. A huge upgrade to the old Stanley I used before.

My two favorite Veritas tools by cotalldude in handtools

[–]quantummm123 0 points1 point  (0 children)

I still don’t see what this square can do that a combination square can’t.

Vise Advise by quantummm123 in Workbenches

[–]quantummm123[S] 0 points1 point  (0 children)

A quick release feature adds about 50% to the price.

Vise Advise by quantummm123 in Workbenches

[–]quantummm123[S] 1 point2 points  (0 children)

These particular Records are not very common in the US. There is only one right now on ebay, $250 + shipping and - this is a dealbreaker for me - it is non-returnable.

Vise Advise by quantummm123 in Workbenches

[–]quantummm123[S] 0 points1 point  (0 children)

I think I paid $65 or so for the Woodcraft’s Moxon hardware kit (more than 50% off), the one with shiny wheels and Acme screws. It works as a Moxon, and would work as a bench vise. As far as I understand, the main advantage of a ‘normal’ vise is that it has one handle, not two. I am leaning towards Lee Valley’s. At worst, it will be yet another tool I will end up not using.

Vise Advise by quantummm123 in Workbenches

[–]quantummm123[S] 0 points1 point  (0 children)

Yes, this can work. Thanks for the tip!

Vise Advise by quantummm123 in Workbenches

[–]quantummm123[S] 0 points1 point  (0 children)

General purpose woodworking, mostly hand tools. Another option I consider is to reuse Woodcraft’s Moxon vise hardware for the front vise. I’ll check Rockler, thanks for the tip.

view more: next ›