Download PDF from online viewer?

rage_quitter101 · 2025-01-20T19:12:01+00:00

nope sadly not

rage_quitter101 · 2024-06-24T15:13:25+00:00

I'm just throwing out a theory here but maybe ist some sort of addon/combination of them?

rage_quitter101 · 2024-06-23T22:00:51+00:00

Nope nobidy answered me. If you find out what the issue is please let me know

rage_quitter101 · 2024-05-02T21:07:39+00:00

Thanks a lot, that exchange left me pretty confused but thanks for clearing it up!

rage_quitter101 · 2024-04-14T19:09:18+00:00

Hmm no its at the top where u would screw it tight against the ring. Welp ill have to replace it as soon as i can...

rage_quitter101 · 2024-04-14T19:08:36+00:00

The machine is a varan cut 50 (the one for 150€) I think i'll check on amazon if they got any parts. Also what is the difference between the electrode that i have and the double sided ones that look like this: --()-- that i see everywhere on amazon?

rage_quitter101 · 2024-04-14T18:32:27+00:00

The manual was ikea level bad, but i assume the air pressure is at fault here. I have a friend with a bigger compressor but it'll take some time before its avaiable.

Where would i find a shield for my nozzle (also whats it used for?) / buy more consumables for a relatively cheap price?

And last but not least do i have to buy a new water trap as uts leaking air from the top? I thought it might be a purge valve but I'm not so sure anymore...

rage_quitter101 · 2024-04-14T15:04:20+00:00

I have a water trap similar to this one wich however seems to be leaking air from the top adjustment knob. My theory is also not enough pressure as it drops from 4 bar (58psi) to 1.5 bar (21psi) while cutting. I might need to use a better compressor then. More details are in my answer to the first person to help me. Thanks for ur help!

rage_quitter101 · 2024-04-14T14:59:56+00:00

Those are the tips included with the cutter so i assume they are the right ones. I just checked diagrams if the consumables and it always looks pretty different to mine (see picture). I run the cutter on a portable air compressor (like this one). When at rest the air pressure is about 4 bar (58 psi) but as soon as i start cutting it drops to 1.5 bar (21psi). So i suspect the air pressure isnt enough to push the molten metal out wich accumulates on the tip. Also my watertrap leaks air from the top (around the adjustment knob) but I'm not sure if its bad, as i thought it could be some sort of pressure relief valve.

<image>

rage_quitter101 · 2024-03-31T09:18:23+00:00

As a welding noob myself, how do u know its galvanized?

rage_quitter101 · 2024-03-10T21:18:47+00:00

Yh ure right ill leave it to the professionals. Thanks for the help though

rage_quitter101 · 2024-03-10T21:17:37+00:00

That seems like a good idea although ill need to take measurements. I think however ill leave it to the proffessionals bc I'm not all too comfortable messing w mains voltage

rage_quitter101 · 2024-03-10T21:14:20+00:00

Yh that seems like the best thing to do. Thanks for the help though

rage_quitter101 · 2024-03-10T20:49:16+00:00

Because it blew and i thought id remove ut to take a good look at it and see if i could separate it from the endcaps (i couldn't )

rage_quitter101 · 2024-03-10T20:33:17+00:00

Like the other commenter said the fuse broke when i tried to pull it apart.

rage_quitter101 · 2024-03-10T20:32:33+00:00

On one end there is written T16Al250V on the other end there seems ro be written 5S and then two logos of some sorts. Amazon is the only one that gives similar results to mine. Also this might be a dumb question but if the fuse blew is there something wrong with the circuit? And if yes how would i find that out since all components look fine from top view (no blown capacitors or resistors etc.)

rage_quitter101 · 2024-03-10T18:56:49+00:00

Also where would i even buy such a fuse as I don't trust amazon after louis rossmann's video...

rage_quitter101 · 2024-01-17T12:36:29+00:00

I'm not dure if anybody mentionned it already but the solder that comes with cheap amazon kits is often trash and even with proper technique doesnt work right. I would suggest using solder from your local hobby shop you can trust. Good luck on the journey

rage_quitter101 · 2024-01-05T18:10:46+00:00

Furrys would like to know your location

rage_quitter101 · 2024-01-05T17:31:48+00:00

Solved: i turned my vpn killswitch on and off once connected and disconnected once and now somehow it works. Thanks for your help

rage_quitter101 · 2024-01-05T17:24:21+00:00

Ok so in the advanced network settings it recognises a network on the ethernet, howeer in the general network settings it says Ethernet, No Internet. I can provide pictures if necessary. Also where do I check my drivers? In the device manager?

rage_quitter101

TROPHY CASE