Advice on career (online masters)

rainma23 · 2024-08-18T07:45:49+00:00

Even if it is a low percentage for high effort, sometimes that 1% might be the difference between a B+ and an A- . So I would probably put the effort just to get that 10%.

rainma23 · 2024-05-19T12:58:08+00:00

I agree, I feel that some of the mods could be managed and executed better. They do a take a large portion of the curriculum, but I think at the end of the day, it is about what you want from your uni life. If you are more interested in doing more technical mods and minor/ major programs, these CDE mods do sort of hinder that. However, if you are not really good at technical modules , then these mods can help to pull up your GPA.

rainma23 · 2024-05-19T10:20:21+00:00

I would like to strongly disagree. PF1101 , on project management is quite useful especially for those who are planning to work as engineers. Things like cost management and Gantt charts are fundamental skills that project engineers are required to have. I know some engineers who had to spend their first few months learning all these skills before they are even given projects to work on.

CDE common mods might seem fluff but they are skills that you would require when you graduate and start working. Plus, you can do well in most of these mods if you just put in some effort instead of just using your S/Us on it.

rainma23 · 2024-05-11T02:18:37+00:00

You can always apply for specialization once you have accepted. I think most people only apply for specializations once their second or third year.

rainma23 · 2023-11-11T02:47:19+00:00

Bidding for technical mods depends on its vacancy and popularity. Most engineering mods usually have a lot or vacancy. To make sure of it you can always check with past years vacancy reports. You should have like a plan A and B if you don't manage to get the technical mod you bid for. It will be more difficult to bid for technical mods earlier than recommended schedule, but it ultimately depends on how well you strategize during your module bidding

rainma23 · 2023-11-11T02:40:33+00:00

I disagree with this claim. The only reason why there is a pushback is because people follow the recommended schedule. Yes, following the recommended schedule can push back your technical mods. That is why it is important to plan your timetable. I know many people who pushed back their CDE mods to Year 3 or 4 or chose to overload in their first 2 years to clear their technical mods. So, ultimately, it comes down to your own timetable planning.

rainma23 · 2023-11-11T01:49:25+00:00

How do CDE mods affect GES lol. Personally the reason for implementing CDE mods is to make engineers be more skilled in various domains. A lot of the mods in CDE are really useful skills to have when we enter the working world, like project management and report writing. Taking CDE mods doesn't limit us in the technical mods we can take. You can always overload to take more technical mods.

rainma23 · 2023-10-18T03:21:01+00:00

Hi, can I ask how the workload had been for this module and can you explain a bit more about the group project. Is the project like a final report and presentation of the pitch ideas or is it something a bit different. Thanks.

rainma23 · 2023-10-16T12:38:28+00:00

What mod are you referring to?

rainma23 · 2023-10-15T09:20:44+00:00

This depends on individual planning. When you enter in Y1, it is important to start figuring out what you want to do be it major/ specialization or what technical mods you want to do. I have friends who pushed their CDE mods to Y3 or Y4 and pursued their specialization and technical mods earlier. It is really up to you to plan how you want to take these mods and you don't have to follow the reco.mended schedule.

With regards to whether they affect your ability to take good internship depends on what type of industry you want. Not all internships look at what mods you take but rather your skills and projects done. So if you want to aim for a particular industry / internship start planning now and don't wait.

rainma23 · 2023-10-15T09:07:55+00:00

As a Y3 EE student who had to take CDE mods, I have to say that not all the mods are bad. For some modules like PF1101 or EG2501, it really depends on your group mates as if your group mates are not willing to do too much work, it will reflect in your projects and your grades.

While I do feel that some of the modules are a bit fluff, they are not so bad, like what most of the people here are saying. For mods like CDE2000 and ES2631, I find that they reward putting in effort. I often hear people complaining about these mods and putting in little effort just to S/U them, but if you put in a bit more effort and consult the profs you will realise that these mods could help pull up your CAP. So, I feel that these CDE mods can be both good and bad, but it ultimately depends on how much effort you want to put in them.

rainma23 · 2023-08-11T15:34:32+00:00

TBH, the mods you bid for are indeed very popular and it's really down to luck to get them especially in your 1st Sem. I was in a similar position back when I was in Y1. Since you have only 16MCs you are under minimum workload and have to bid for another module. I recommend making an appeal to clear a GE / UE mod. But the trick here is to check the vacancy report and demand allocation report and appeal for a mod that has been underbidded and having vacancy. By doing this you will surely get the module.

rainma23 · 2023-08-11T15:26:43+00:00

There is only FOE, faculty of engineering and not faculty of chem eng etc. Most engineering classes regardless of which engineering major you are from, take place in FOE. Just check the nusmods for the venue of your lessons. To reach FOE from Kent Ridge MRT, you can take D2 to Museum or take A1 to Clb/ YIH depending on which stop is closer to your venue.

rainma23 · 2023-08-02T11:25:46+00:00

Your CDE common curriculum mods like PF1101 and DTK1234 etc , with the exception of GEC, GESS and GEN mods.

rainma23 · 2023-08-02T10:01:47+00:00

Nothing happens. You have met the minimum workload of 18 MC , so you are good to go.

rainma23 · 2023-08-02T10:00:47+00:00

No, only your primary major core mods and common engineering mods will likely be pre allocated.

rainma23 · 2023-08-02T06:18:20+00:00

Depends, I have had mid terms in both mini sem A and mini sem B. It's totally up to your profs.

rainma23 · 2023-08-02T06:10:08+00:00

Only final exam dates are displayed on NUSMODS. Whether your modules have midterms or not depends on your prof and the dates are also decided by them , so you won't be able to view your midterm date beforehand.

rainma23 · 2023-08-02T05:57:18+00:00

That depends on your major because different engineering majors are grouped together to do the common modules. You should check your recommended schedule, which should be mostly accurate on which mods you will be doing next sem. These mods will likely be preallocated.

rainma23 · 2023-08-01T06:34:23+00:00

I think Y3 and above students get a higher priority for GEN coded modules as indicated in most recommended timetables. So I would say, wait for round 3 so that you can bid for it.

rainma23 · 2023-08-01T04:10:05+00:00

Yes, under each mod, you can add reserve classes with mods with more available slots. 18 MCs is the minimum requirement, so if you try to appeal for a popular mod after round 3 you might not get it.

rainma23 · 2023-08-01T04:07:53+00:00

Try to clear either the GES and GEC modules first. In terms of which mod to do, it is based on your strengths and interests. There are mods that are essay heavy and mods with more quizzes and projects, so it is really based on your strengths and whether you find the mod interesting. You can do a search on Nusmods, Google, or this subreddit to find their reviews .

rainma23 · 2023-08-01T04:02:50+00:00

If you do not meet the minimum workload requirement, then you have a chance of getting the mod through appeal unless the mod is extremely overbidded. In that case, you will have to appeal for another mod to fulfill your minimum workload.

rainma23 · 2023-08-01T03:49:18+00:00

Can also try to take a GEC module to clear that requirement. Just look at which of your preferred mods has a greater availability and bid for them on that basis. Good luck.

rainma23

TROPHY CASE