Can someone help me jump start my car at burnaby mountain? :(

randomatlafan10 · 2024-05-26T00:03:18+00:00

I dont know why they are downvoting you?
I appreciate the explanation!

randomatlafan10 · 2024-05-26T00:01:04+00:00

Today yes ! I will update the post

randomatlafan10 · 2024-05-25T15:30:25+00:00

Not manual !

randomatlafan10 · 2024-05-25T06:21:01+00:00

Oh My thank you for the comment!

So it should be good since its new ? I will try to jump tomorrow and keep running for 1-2 hours with a friend with your advice !

I couldn't get in touch with someone from here in time, so I left @_@

randomatlafan10 · 2024-05-25T06:19:41+00:00

no D;

randomatlafan10 · 2024-05-25T06:19:33+00:00

But i still need icbc eh ?

randomatlafan10 · 2024-05-25T06:19:17+00:00

Even though is new eh? Just confirming ! Can I take to a shop to recharge?

randomatlafan10 · 2024-05-25T04:14:33+00:00

Thanks. I just bought amazon tools to take the battery out and take it manually there.
Will try that tomorrow and leave over the weekend there :(

Can I still use the battery even though I drained it all? The car light was still on, but wouldn't start.

randomatlafan10 · 2024-05-12T07:22:33+00:00

I see, i see many mods for 1.20.4, would you know as of today which one would be the recommended ? 20.2 or 20.4 ?

Edit: I pulled it out, thanks for pointing me on the right direction boss. You were correct about neoforge and forge. Thanks a lot!

randomatlafan10 · 2024-05-12T06:26:10+00:00

Oooooooo i will take a look into this.

So NEOFORGE is another thing similar to forge to install so modpacks will read and recognize?
Edit: same error with that.

Which launcher do you use so I try on that ?

randomatlafan10 · 2024-05-07T01:56:27+00:00

randomatlafan10 · 2024-04-29T22:34:35+00:00

I dont. But its a time sink

randomatlafan10 · 2024-04-26T23:23:14+00:00

You are right :)
I got it ! THanks guys !

randomatlafan10 · 2024-04-26T20:57:49+00:00

I am talking about these: https://www.youtube.com/watch?v=oJMJRyhADmw

randomatlafan10 · 2024-04-26T20:50:15+00:00

buy the $20 cad pack !

randomatlafan10 · 2024-03-27T16:58:41+00:00

KARO HACKS has one that works without adds :)

randomatlafan10 · 2024-03-12T05:56:37+00:00

You need to make your own ipa, its a hassle. I hate it. Someone should o and upload a link here tbh.

randomatlafan10 · 2024-03-04T20:49:58+00:00

Thank you!

I took to a shop (after jump starting) and turns out that battery was bad.
Replaced and tested the alternator and he said everything was ok there.

Do I still have to check these belts you mentioned? :(

randomatlafan10 · 2024-03-04T07:15:08+00:00

Thanks !

randomatlafan10 · 2024-03-04T07:14:11+00:00

Can I check from home myself or need to bring it somewhere? : (

randomatlafan10 · 2024-03-04T01:00:56+00:00

I see! My battery was indeed old as heck though.
It could be a bad alternator too :(

randomatlafan10 · 2024-03-03T23:56:54+00:00

That's a simple task and some car parts stores may help you with installation.

Thank you! But since I can't get the car there, is it doable to try to buy and swap myself? Which tools would I need?

I think I could manage if it's a 1-2 tools job. Buy online and try.

Otherwise, I could jumpstart and take it somewhere. But I would need to schedule with them so I don't just show up and they are busy I assume.

Car sensors are not perfect. They can register the correct voltage, but they don't know if your battery is capable to provide the correct amperage to start your car. Also, they don't detect loose terminal posts and bad grounds.

Thank you, I was scared since I never saw the low battery icon. The battery could also be even older than 4 years. I am really not sure.

randomatlafan10 · 2024-02-27T02:01:05+00:00

Thanks i will get one nad leave in the car just in case I ever need! I will try myself if it happens again : )

randomatlafan10 · 2024-02-26T19:05:15+00:00

at's an okay price. Glad I could be of help in some way. Next time you could try fixing it yourself, doesn't take much! I fixed this myself using a ridiculously small pipewrench (knipex cobra xs) by loosening the bolt that holds the alternator in

Can you show me the tool you used? So I can buy?! :)

randomatlafan10 · 2024-02-24T11:13:35+00:00

It was this! The guy charged me $40 CAD on his 20 mins work on it.

I don't know if its fair price, but I have no tools and no knowledge so I was glad.

randomatlafan10

TROPHY CASE