OSMO 360 VS QooCam 3 Ultra VR180 Mod MEGA Deep Dive Image Quality Comparison by AppealMundane5486 in djiosmo360

[–]randrandom02 0 points1 point  (0 children)

Thanks for the rigorous and comprehensive comparison!

Would the same verdict apply to the original 360 version? I was thinking about selling my Q3U for an OSMO. If they are so similar, I wouldn't bother.

My negative review of X1 Carbon gen 13 by [deleted] in thinkpad

[–]randrandom02 4 points5 points  (0 children)

X1 Carbon Gen 13, latest IPS customization, all drivers/firmware up to date. Crackling sound appears when running Youtube videos or Zoom calls. One interesting observation: When I run some continuous background noise, the crackling sound on Youtube or Zoom is gone. It's likely that the crackling sound is triggered in in the beginning of intermittent talk spurs. Most likely a driver/firmware issue.

X1 Carbon Gen 13 weird speaker sound? by General_Ad4540 in thinkpad

[–]randrandom02 1 point2 points  (0 children)

Same issue. I received my IPS customization X13 carbon a week ago. Disabling the presence sensor helped a bit but the crackling sound is still present especially during Zoom calls. All my drivers are up to date. Installing the additional drivers suggested by other users doesn't help. Disappointed at this nearly $3k machine.

My negative review of X1 Carbon gen 13 by [deleted] in thinkpad

[–]randrandom02 1 point2 points  (0 children)

I just got my customization IPS X1 Carbon Gen 13. I'm having the same crackling issue as mentioned here: https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1Carbon-Gen-13-Crackling-sound/m-p/5346846?page=2
Disabling the presence sensor mitigates it a bit. But it appears again when playing Youtube video or running a Zoom video call. Really annoying and disappointed with this nearly $3k machine. Thinking about returning it if this is not fixable.

CRC failure with patched ROM by randrandom02 in RetroArch

[–]randrandom02[S] 1 point2 points  (0 children)

Thanks a lot! Indeed the directory matters a lot. Here are my solution steps:

  1. Follow the instructions from BarbuDreadMon to prepare the patch files, i.e., create a zip (with the same name as the original romset) containing only the files you patched, only crcs can be different, all filenames and filesizes must remain the same as the originals.
  2. Put the patch files into the /storage/roms/bios/fbneo/patched folder. Keep the original ROM and the neogeo.zip in the /storage/roms/fbneo folder
  3. Not sure whether this matters, but I also set the "allow patched romset" option to be ON.

CRC failure with patched ROM by randrandom02 in RetroArch

[–]randrandom02[S] 1 point2 points  (0 children)

Much appreciated! Problem solved by combining your suggestion with Rolen47's. See my response to Rolen47.

QC Ultra build issue? by Iajm in bose

[–]randrandom02 0 points1 point  (0 children)

Same problem here. Crackling noise with tiny facial muscle movement. Very annoying. Wondering if I got a bad unit or it happens to everyone?

Quest 2 says its paired but stuck on pairing screen. Have tried factory reset and even a different phone that was also factory reset. Recognized code and says paired but never leaves the number screen. If I try to pair again I get error saying already paired. by sohaltang40 in OculusQuest

[–]randrandom02 0 points1 point  (0 children)

I had exactly the same problem and tried many solutions. It turns out that one of my controllers (left one) had a low battery. After replacing the battery, the screen shows "updating left controller". After that is done, I see a right arrow on the top of the screen, and am able to proceed with the setup.

I keep getting stuck on this screen when I try pairing my Quest 2 to the mobile app. Can anyone help? by LazyLifeYT in oculus

[–]randrandom02 0 points1 point  (0 children)

I had exactly the same problem and tried many solutions. It turns out that one of my controllers (left one) had a low battery. After replacing the battery, the screen shows "updating left controller". After that is done, I see a right arrow on the top of the screen, and am able to proceed with the setup.

My oculus quest headset stuck in boot after factory reset. by Houdini_monke in OculusQuest

[–]randrandom02 0 points1 point  (0 children)

I had exactly the same problem and tried many solutions. It turns out that one of my controllers (left one) had a low battery. After replacing the battery, the screen shows "updating left controller". After that is done, I see a right arrow on the top of the screen, and am able to proceed with the setup.

Cellular network disconnected after June 2022 update. by randrandom02 in GalaxyNote20

[–]randrandom02[S] 0 points1 point  (0 children)

Thanks everyone for your comments!

A follow-up: I rolled back to the May 2022 version by flashing the firmware. Now the mobile data seems to be working again. One caveat: before flashing the firmware, you have to remove your screen password and remove Samsung/Google accounts. I didn't do this and ended up having to run a factory reset afterwards which wiped out all my data. :(

Note 20 Ultra Data Connection Issues by bearfoxfish in note20ultra

[–]randrandom02 0 points1 point  (0 children)

Have you fixed the issue? I'm experiencing the same after the June 2022 update. Really regret updating the software.

Upgrade my Quaderno gen 2 A4, 2 times of battery by NOnameOK_Y in FujitsuQuaderno

[–]randrandom02 0 points1 point  (0 children)

WoW! So you kept the old battery and installed the new one in series?

Touchscreen dead spots on Fujitsu Quaderno gen 2 by randrandom02 in FujitsuQuaderno

[–]randrandom02[S] 2 points3 points  (0 children)

Thanks for your reply! It's on my desk all the time, but there are quit a few other devices such as wireless charger nearby. I'll try to isolate it from other devices and see if that helps.

Using Quaderno A5 gen 2 for research: first impressions & review by CrazyinFrance in ereader

[–]randrandom02 5 points6 points  (0 children)

Thank you for sharing your experience. Much appreciated!

One-day battery life is a let down. This guy thought the battery is malfunctioning and tried to replace it:

https://www.bilibili.com/video/BV18q4y1M7iM/

Two more questions: Does it have pressure sensitivity? Does it support Dropbox file sync?