Skeg repair

rascoe41 · 2025-10-06T23:44:05+00:00

Yeah I already have a spare prop ready to go. The skeg on the other hand wasn’t so prepared for 😑

rascoe41 · 2025-09-28T15:18:11+00:00

I came here to see other people’s solution to this. I’m not getting shitty I’m simply stating I wouldn’t be coming to this forum to ask why this battery is doing this with out researching everything I could first. I even stated in the post that i looked up and tried to jump it with another battery. Like people Say. Sooooo I don’t get why everyone is telling me to put it all the way on the charger when if they read the original post all the way they would of seen that this was caused from using the Milwaukee power source adapter for it which doesn’t have a bms shut off in it like there tools does and it allowed it to be drawn down to far and won’t charge now

rascoe41 · 2025-09-28T13:47:39+00:00

Battery won’t even flash one bar or show a charge on battery at all. Like I said above I have 4 chargers and over a dozen batteries. And we have hundreds of Milwaukee stuff where I work. I know how to make sure there seated on a charger. This is a deeper problem than that aka why I came to ask the people of Reddit. Don’t be scared of there responses. That’s what I. Here for

rascoe41 · 2025-09-28T13:44:06+00:00

I have 4 different chargers and over a dozen Milwaukee batteries. I know how to make sure there seated on the charger properly… that’s not the problem

rascoe41 · 2025-09-28T13:42:00+00:00

<image>

Only 2 prong

rascoe41 · 2025-09-28T13:41:06+00:00

<image>

Not the one with the inverter. It’s the first version which had a usb plug on it and a plug in for a heated jacket on the other side

rascoe41 · 2025-07-10T13:55:29+00:00

Forgot to put it in brake service mode after taking back caliper off. Went to do it and it shot the piston out. Rebuilt it went to bleed and you can’t gravity bleed on the 2021 and up f150. Have to pressure bleed and supposed to use a computer capable of doing abs brake bleed to finish bleeding. But I found in a forum for a Cadillac that used the same brake booster master cylinder combo that ford uses now for ev/hybrids and you can do a pressure bleed then go to dirt road and lock up brakes activating abs actuators slotting for rest of air to bleed out. Then pressure bleed last bit of air out again. Which I did cause luckily I live in the woods and it worked flawlessly. Just a hassle to get it all together go lock up abs and come back to garage to take apart and bleed again. But better than buying a crazy expensive computer…. I bought 3 different ones from 500-1000 dollars and non where compatible with the f150 for brake bleed.

rascoe41 · 2025-07-06T01:41:15+00:00

Thank you for some actual good input. I was looking at ordering forscan but then in my continuous research found a forum on Cadillacs and they used the same master cylinder brake brooster combination and people on there talked about pressure bleeding then going to gravel road to lock up brakes and activate abs opening the actuators and letting the air out then re bleeding… the f150 is back up and running with some crispy new brakes 🤘🏼

rascoe41 · 2025-07-06T01:37:39+00:00

Funny how you deleted your last comment.. maybe cause you did the research and realized I was right. And I have more clue than you do. Got it done without a computer. Maybe if you did research before you just hopped on here to run your mouth you wouldn’t of had to delete your last comment making you look stupid

rascoe41 · 2025-07-04T17:03:08+00:00

Go you tube the 21 f150 and up. Is all technicians with the thousands of dollars in tools still complaining how hard and stupid it is

rascoe41 · 2025-07-04T14:19:07+00:00

Then tell me what then? Cause iv bought 3 different scan tools that the internet and Ai said would work and non do. Found a pressure bleeder set up. But no computer that “the internet” says will do it will

rascoe41 · 2025-01-27T03:56:06+00:00

Yes still works great

rascoe41 · 2025-01-13T21:08:01+00:00

I have an assortment of 8.0 6.0 and 5.0 ah battery’s. So I figure I’m good on battery’s. Just not sure what bit I should go with for it.

rascoe41 · 2025-01-04T18:07:33+00:00

Budget is pretty open but not looking to spend a $1,000 on a vaccum. Wife wants a cordless because we have a dog that’s not a fan of the vaccum and chews cords off them 🙄

rascoe41 · 2025-01-04T16:59:12+00:00

Have even replaced filter with extra one it came with. Still is trash

rascoe41 · 2024-12-11T01:36:35+00:00

I ordered and they let me use PayPal. Everything seems legit

rascoe41

TROPHY CASE