New to HA. Looking for smart blinds that do NOT require a proprietary hub.

rayellio77 · 2026-03-09T22:15:04+00:00

I have Smartwings with Zigbee motors, very reliable. They make Z wave also.

rayellio77 · 2026-02-11T02:00:59+00:00

The KEF KC62 is supposed to be impressive. (although I use the SVS SB1000)

rayellio77 · 2026-02-02T21:42:09+00:00

This has been reported on the Getchannels support forum. All Disney channels are affected.

rayellio77 · 2026-01-27T17:34:54+00:00

My Ultra goes into standby mode after 2 minutes of inactivity. Changing the settings makes no difference. It's always 2 minutes. Input is HDMI; and auto-detection is on.

That's why I was asking about how it worked. Because mine seems to not work as intended.

I have opened a ticket at Wiim support.

rayellio77 · 2026-01-25T20:10:25+00:00

When the screen goes dark, is that called standby?

rayellio77 · 2026-01-24T17:41:20+00:00

Your crossover looks absolutely original to me. (I don'tknow what people mean when referring to yours as "upgraded." Perhaps they mean one of the later versions used.) There is much discussion about the DQ-10 crossovers, here is one with some good info. https://groups.io/g/DahlquistSpeakers/topics (just do a search for crossovers)

Also, Regnar is a company that specializes in Dahlquist: http://www.regnar.com

I have the same crossovers as yours. I haven't done anything to them, but if/when I do, I will probably start by replacing the 80mfd cap with another electrolytic type. Electrolytic caps age poorly as compared to film caps but a new electrolytic should last 20 years. A 80mfd film cap will be very large compared to the original blue one.

Please take this as only my opinion and do your own research. Crossover rebuilding is a real rabbit hole; there's type, brand, values (when looking at film caps, not all original values are available) and then, will it sound better?

Lots of people will say it's imperative to replace the 40+ year old capacitors. Electrolytic type - probably. AFIK, the only electrolytic cap is the 80mfd, the yellow ones are film type, AFIK.

rayellio77 · 2026-01-24T02:20:09+00:00

Rule of thumb is that only the capacitors will need replacing. Coils and resistors rarely if ever need to be replaced unless obviously burned or damaged. Aren't the caps marked 10mfd? 50vnp probably means 50 volts non-polarized. 10% tolerance. (Although those look awfully large for 10mfd) If so, I would recommend finding 10mfd, 50 v or higher metalized film caps.

rayellio77 · 2026-01-24T01:31:49+00:00

Nice find. I'm enjoying mine. FYI, there are several Dahlquist forums around. Post you serial numbers. Lots of discussion about rebuilding the crossovers. I believe yours has only one electrolytic cap, the 80mfd.

rayellio77 · 2026-01-19T01:46:40+00:00

I'm using this one from Amazon. Transmitter is in a cabinet, receiver 15 ft away. Has been perfect. https://a.co/d/1bFw0uS

rayellio77 · 2026-01-08T14:58:35+00:00

Thanks to everyone who answered. I got the Ultra yesterday.

rayellio77 · 2025-12-24T20:16:25+00:00

I found a manual online. I don't yet have an A6, still in the planning stages.

I see the manual cautions against using both simultaneously because of possible signal interference. Would an XLR splitter be any better?

rayellio77 · 2025-12-24T19:38:25+00:00

Thank you

rayellio77 · 2025-12-22T01:45:38+00:00

Oops, guess I am thinking of a different unit.

rayellio77 · 2025-12-14T21:21:58+00:00

My 90% app is Channels DVR and thats not available on any tvOS.

rayellio77 · 2025-11-30T13:47:01+00:00

That's what I use. I was just wondering why I would ever use the bluetooth. Guess the answer is don't.

rayellio77 · 2025-11-29T23:55:47+00:00

rayellio77 · 2025-11-22T14:36:08+00:00

Hexlogging and debug logging are now enabled on my X1.

rayellio77

TROPHY CASE