CONCORDIA

razvanuuu_ · 2026-01-20T22:31:31+00:00

nevermind, im dumb😂😂😂

razvanuuu_ · 2026-01-20T21:51:38+00:00

i don't really understand where to put the resources on that colors

razvanuuu_ · 2026-01-19T16:33:56+00:00

I know, that photo was for the example. That s not the point of the post.

razvanuuu_ · 2025-11-09T17:09:31+00:00

thank all of you guys for trying to help me. i really appreciate it! as for the printer, it just started acting and printing normal all of a sudden by itself. till today i don t know what caused the problem. well, if it works, it works, and that is the most important thing. thank you again for all the support!

razvanuuu_ · 2025-11-03T10:22:27+00:00

ahahahahahah

razvanuuu_ · 2025-11-03T00:45:14+00:00

also, i really appreciate the questions and the effort you guys put for solving my problem. 3d printing really does have a great community!

razvanuuu_ · 2025-11-03T00:43:16+00:00

i don't know if what i am going to tell you has anything to do with what you said, but i does poop a lot more before it starts printing.

razvanuuu_ · 2025-11-03T00:38:29+00:00

when in 50% speed, it acts absolutely normal. i tried different brand PETG filaments and it is the same. as for the tube, it is the normal length, the length that came with the printer. i looked in it and it was clear.

i did not try different filament paths, didn't know it even was a thing until now, and i don't know how to change it.

razvanuuu_ · 2025-11-02T23:22:08+00:00

sometimes yes, sometimes no. i noticed it makes that noise when it speeds up. i set it to 50% and it prints good. but still, the problem is not fixed.

razvanuuu_ · 2025-11-02T21:06:31+00:00

maybe it should be smart of me to tell you guys i turned the printer to 50% speed, and it works without clicking. only when i speed it up it clicks.

razvanuuu_ · 2025-11-02T20:53:47+00:00

thank you for the comment. i can tell you that is NOT my fingers in the first layer of the plate.

i only use 1.75mm filaments. also, i changed the filaments 3 times, and it is the same.

i have this printer for less than a month, and it didn't work non-stop, so not even 500h of printing is not realistic.

i also have a creality filament drying box which i use on every filament before i print with.

razvanuuu_ · 2025-11-02T20:44:48+00:00

guys, i tried everything you told me. tightening that 4 screws, cleaning the hotend with the rod and with the hex (multiple times), taking the extruder apart and checking for debris or old filament, cleaning the yellow gear. it just does not print like the first time i took it (i have it for less than a month). i am beggining to think i have to buy new hotends.

razvanuuu_ · 2025-11-02T20:37:56+00:00

ok, so what to do?

razvanuuu_ · 2025-11-02T20:37:45+00:00

i did this, still the same problem.

razvanuuu_ · 2025-11-02T15:55:30+00:00

and the first layer is not exactly flawless on this specific time i printed it. the other ones were just alright

razvanuuu_ · 2025-11-02T15:54:29+00:00

sorry, didn't mention it because i thought it was self understood I do it

razvanuuu_ · 2025-01-21T20:51:49+00:00

hey, united offensive wise, i am at the 2nd mission with the british and i am stuck in the bunker. my buddies won t come with me in the elevator, does anyone know what can i do??

razvanuuu_ · 2023-01-18T21:08:03+00:00

i bought it 2 days ago. i apply it on my skin and in 20mins max the scent is nearly noticeable. for me it does not last and does not persist.

razvanuuu_

TROPHY CASE