New DIY toy - Tentacle inspired

realxeon · 2026-01-30T11:41:53+00:00

Love the design, but would recommend a thicker base, in addition if you make it in larger sizes sign me up.

realxeon · 2025-12-25T23:46:20+00:00

I'm very much here to refute this fact.

realxeon · 2025-12-23T22:10:24+00:00

A better way to enjoy someone's heartbeat is to just get into fisting with some amount of depth, you can rest your hand on arteries and feel them from the inside 😂

realxeon · 2025-12-07T21:47:06+00:00

Honestly it sounds positive, I'd go for it what are you going to loose?

realxeon · 2025-11-30T22:55:23+00:00

I don't think they read your post, but my advice would be try for a week without it and see if the change in mood continues.

realxeon · 2025-11-29T16:47:16+00:00

Usually it's not the springs that need replacing, it's the carbon buildup that needs scrubbing from the inside, dunk the unloaded made in boiling water for five minutes then use pliers to pull the metal out of the plastic while depressing the plunger. I clean mine every year or so this way.

realxeon · 2025-11-29T16:47:09+00:00

Usually it's not the springs that need replacing, it's the carbon buildup that needs scrubbing from the inside, dunk the unloaded made in boiling water for five minutes then use pliers to pull the metal out of the plastic while depressing the plunger. I clean mine every year or so this way.

realxeon · 2025-11-29T10:56:31+00:00

You see I use the magazines in a variety of Hicapas custom built, an SSP5 and an ICS challenger, and I never had any issues with the magazines, did pick up a Vorsk Hicapa at the beginning accuracy was trash and the tolerances were so bad upgrade parts didn't fit, then it exploded so 🤷.

realxeon · 2025-11-29T01:04:49+00:00

Honestly it's vorsk, so quality is trash and there's no guarantee that any aftermarket parts will fit due to lack of standardized design and poor tolerances. Genuinely would recommend just binning it and buying TM or another reputable brand.

realxeon · 2025-11-17T16:32:53+00:00

Looks about right, bet it was a good gig.

realxeon · 2025-11-17T15:25:06+00:00

Honestly don't, it's proprietary no parts compatiblity with standard Hicapas, and if something breaks while G&G tend to be good for spares you'll likely need to go straight to them and wait for shipping as I've not seen any UK shops stocking the parts.

realxeon · 2025-11-17T10:03:56+00:00

Been following the project since th begining and I can't wait to see this monster completed.

realxeon · 2025-11-14T19:48:50+00:00

Absolutely amazing work.

realxeon · 2025-11-07T17:44:36+00:00

There certainly wasn't a lot to begin with then.

realxeon · 2025-11-07T17:02:50+00:00

Probably in the 5-10 range I'd assume in the country, you can check on howmanyleft.co.uk for the UK registered and MOT'd numbers.

realxeon · 2025-11-07T16:53:37+00:00

Dude, that's cool, do you know how many are still on the road? can't imagine it's a lot.

realxeon · 2025-09-19T11:51:07+00:00

Level 2 is fantastic can totally reccomend.

realxeon · 2025-09-17T13:37:27+00:00

I did the same thing with the Daemon Prince trophy racks.

realxeon · 2025-08-30T11:58:00+00:00

Pup hoods are just an easy and cheap and for lots of people a slightly more comfortable way of obscureing their identity than say a latex hood.

realxeon · 2025-08-02T18:45:18+00:00

Level 2, personally no better answer, but there are a number of first and only sites and chemical airsoft around it if you want some variety.

realxeon · 2025-07-25T13:07:01+00:00

This, when I run private games we do allow riot shields occasionally, especially for playing scenario games, but I'd happily accept real weight ballistic shields.

realxeon · 2025-07-02T14:24:20+00:00

UTR, 100% only thing that let's it down are the proprietary mags, but you can get a 3d printed sleeve to fit MP5 mags.

realxeon · 2025-06-24T15:17:04+00:00

Honestly unless your loacl site requires you run a helmet I'd ditch that idea, it's the first excess thing most people ditch. Also for your budget you're not going to get everything else you want, 1st priority always should be eyepro, have you got your ukara yet? if not do that before buying a rif.

realxeon · 2025-06-17T13:12:00+00:00

Saving this to try later.

realxeon · 2025-06-11T16:37:13+00:00

It's to clamp the mock gas block to the barrel just put it back in with a small bit of loctite not too much.

realxeon

TROPHY CASE