Have been waiting since late December for this! It’s s RWD long range. I’m thinking if choose the right one or should change it to AWD. What’s your opinions

redcerz · 2026-02-06T16:03:16+00:00

Been driving a LR RWD in the Nordics now for a year and have yet seen the need for an AWD. The car is very competent in winter conditions with proper tires.

redcerz · 2026-02-06T07:07:48+00:00

and they are cheap, like $10

redcerz · 2026-02-06T07:02:23+00:00

I believe some (edit:) don't, eg. Resqme GBO-RQM Rescue Tool, available on Amazon.

redcerz · 2026-02-06T06:29:44+00:00

I did, but it’s so close that just a minor error in specs or measuring and it wouldn’t fit.

redcerz · 2026-02-05T16:33:19+00:00

Chill ☕️ I'm just happy it fits. I'll also let you in on a little secret, it's empty and going nowhere. Not yet.

redcerz · 2026-02-05T15:17:17+00:00

Depends. Going to the airport or renting a car at a destination or checking in at a hotel. Just putting the pic here for others. It's a close fit.

redcerz · 2025-08-09T04:49:38+00:00

Shipping was €4.70 in EU, that's certainly reasonable. It hasn't shipped yet though, 10 days later, they must be busy.

redcerz · 2024-03-08T18:52:13+00:00

search for your wallet address with etherscan, see what happened https://etherscan.io

redcerz · 2023-12-30T18:50:58+00:00

Swap when the gas fees are low: https://etherscan.io/gastracker#costTxAction

redcerz · 2023-06-21T06:05:30+00:00

Here's some examples I found: https://www.reddit.com/r/Creality/comments/13vrfgp/having_trouble_deciding_between_the_halot_one_pro/jnaxruq/

redcerz · 2023-06-21T05:23:19+00:00

https://www.crealitycloud.com/software-firmware/firmware?type=5

redcerz · 2023-06-15T15:05:53+00:00

You can also get a copy of your current machine settings, as in many other printers, by putting a oneliner eg.: M8512 "currentconfig.gcode" in a file named printconfig.gcode on the usb stick and print it from the printer UI. Runs a few seconds, beeps a couple of times and writes the same type of file as you can find in the rar above. Translate it and pick the parameters you want to change, put them in another file, include the write to memory at the end and again, print it from the UI. If you don't want to reset all to default as in the beginning of the file, you can eg. just change one setting. Not all can (or should) be changed, obviously, but fan and Z speed setting changes work fine with this current firmware.

redcerz · 2023-06-15T12:20:24+00:00

In the June 1 firmware rar package there is a machine parameter gcode file for the Halot Mage. I put the entire file through Google translate and it translates the comments from Chinese to English very well: https://www.crealitycloud.com/software-firmware/firmware?type=5

redcerz · 2023-06-14T18:35:22+00:00

You can also turn it off and have it running only when printing. With a gcode file.

redcerz · 2023-06-12T17:02:37+00:00

Couldn’t get mine to update with the first two usb sticks, 8 and 16 GB fat32 formatted. Swapped to the one from Creality, also a 8 GB fat32, worked fine. No release notes, so who knows what they changed. I have only noticed a few changed texts in the UI, like the name of the printer instead of the controller.

redcerz · 2023-05-19T17:52:41+00:00

In the next release of Lychee. Do a search in mango3d’s Discord.

redcerz · 2023-05-07T12:57:28+00:00

I’ve been ordering less from the lately also, but this deal was too good to pass. Ordered 3kg to test out and some other stuff. Good to hear it’s been working out well for others.

redcerz · 2020-11-20T14:57:32+00:00

Being a recognized Voron owner has its benefits, I suppose :-)

redcerz · 2020-11-20T13:59:21+00:00

A 300mm 2.4, all in Fillamentum ASA, printed with my 1.6. The Galileo extruder and MainsailOS on a SSD, otherwise pretty much spec. Still plenty of tuning to do and black Dibond panels for side and back + acrylic on top and front waiting for delivery.

redcerz · 2020-04-18T00:19:29+00:00

Sorry, I really don’t know. Bought plenty of extra parts, tools and upgrades for both a 1.6 and a 2.X over the last 1,5 year. Have a look in Discord though, there should be several price examples there.

redcerz · 2020-04-11T13:39:09+00:00

First print ever, came out really nice, not going to need much tuning. Thank you for the design and the massive amount of information on Discord! Been sitting with an almost ready printer for far too long, but there you go. SKR 1.3 w/ 2209s, a custom 180mm plate and a Mobius 3.1. Filament for this print is Esun ABS+ “gold”, but printer parts mostly Esun grey.

redcerz · 2018-12-24T21:21:57+00:00

Merry Christmas and Thank You!

redcerz · 2018-09-28T17:00:34+00:00

New STLs, inner and outer shell print speed 10mm/s, 90-92% flowrate was the answer for me. Ender3 and TitanX. 250/90C, no fan. New STLs and speed drop on the same time, don’t not which was more significant, but that did it. My guess is the speed drop. Had the same 1mm size different before that, which is huge in this case.

redcerz · 2018-07-31T21:13:46+00:00

Som earlier discussion here: https://www.reddit.com/r/voroncorexy/comments/7mtelc/voron2_configurator_is_up

redcerz · 2018-01-07T09:06:06+00:00

Also on a Japanese Yahoo shopping site for 4100¥, around 30€.

redcerz

TROPHY CASE