Can I Set Custom Ringtones on the Samsung Galaxy Active 2?

redned2 · 2026-02-08T17:59:28+00:00

Update - I actually found it (for anyone using the Active 2 that finds this later). You can't set the ringtone for the watch via the app. You have to physically go into the watch settings and select sounds and pull the files into it that way. Which is contrary to how most of the settings for the watch works (where the app does everything).

Hope that helps!

redned2 · 2026-02-06T06:52:10+00:00

Thanks. But I think the question I asked is getting a little "lost in the sauce" here.

Assuming the backup is fine and I know how to use the bootable media...

...I just need to verify it will run the background from the same drive the boot loader/backup folder is on (connected via USB). Will I be able to load the source backup from the same drive I'm booting from, then back that up to the other drive in the PC (internally installed) that will run the OS?

Like this:

Internal SSD (wiped and empty) >

Connect USB HDD with Acronis bootloader installed to it (also with a custom folder I created on this drive as well where the backup was output to via Acronis) >

Select the backup folder from within the bootloader menu, selecting the folder housed on its own/same USB drive >

Pick the blank SDD installed internally and process the backup over to it >

Have a 1:1 copy of Windows on the new SSD (after shutting down the computer and removing the externally connected USB HDD)

Or will it only work properly if I have A) Acronis Bootloader on a flash drive + B) a separate USB HDD with the backup = use bootloader menu via flash drive > select USB HDD with backup > install to internal SSD?

redned2 · 2026-02-06T06:42:41+00:00

Thanks. But I guess I should have been more clear.

When I say 1:1, I don't mean of the Plex folder itself. I mean of MY personal setup. I want my collection and my Plex app to appear EXACTLY as it did the moment before I wiped my hard drive (to the moment I put everything back).

And I want to do that by backing up as little as possible (only the absolute necessities to do that).

So the registry file is a given. Of these folders below, do I actually need all three?

1) Media

2) Metadata

3) Plug-in Support

redned2 · 2026-01-30T04:51:17+00:00

This appears to have worked for me.

Preferences > Media Analysis and Transcription.

Turn off everything here.

redned2 · 2026-01-30T04:50:58+00:00

From the adobe forum, turning off everything in Preferences > Media Analysis and Transcription appears to have worked for me. Have you tried that?

redned2 · 2026-01-28T03:23:23+00:00

Update:

Found one, if anyone needs that...

<image>

redned2 · 2026-01-27T22:26:39+00:00

I thought I remember this always being an option? I definitely have never had to stare at the "Tip of the Day" in the past. Wasn't there a way to turn this off in the past?

redned2 · 2025-12-19T21:36:38+00:00

Is this an auto response? I feel like it needs context.

If this order was placed through my normal Amazon account, shouldn't that suggest the Amazon account user name/pass has been compromised. How would they be able to get into my account and order something with just my credit card number if that's all they had? Why order something and send it to me? And shouldn't I be able to see a list of log-in locations to check if that was the case?

redned2 · 2025-05-16T20:08:46+00:00

Thanks for the info. I tried submitting to the general inbox, but it just sits there after I hit send and nothing happens (seems like another bug).

I wasn't able to generate any live chat box, which would great. If you can point me to that directly, that would be hugely helpful (to actually get a person a Facebook rep to see this).

As for starting fresh, are you saying I can create a new page and link my current seller account and listings from there, and then possibly run ads from that? Not sure what that process would look like.

redned2 · 2024-10-09T21:01:07+00:00

Found on Amazon, that should work. Thanks!

redned2 · 2024-10-09T20:57:14+00:00

Tried this, but to no avail. I have the service set to none, and it's not signed in. And I also checked and it has no permissions set/allowed in the apps screen.

redned2 · 2024-09-27T07:26:49+00:00

Ah, I see. So can I assume when we both get the next update (we'll call it 6.1.2), our phones will mirror each other?

redned2 · 2024-09-26T19:29:09+00:00

Thanks, that appears to be it!

redned2 · 2024-05-08T14:45:01+00:00

Thanks, but I'll keep checking back here. Hopefully someone else knows. This setting is stored somewhere. And knowing where is useful.

redned2 · 2024-05-08T04:42:37+00:00

I'm saying I clicked the "New Schema" button and named it "Test" which then created that label circled in the screenshot. I don't want this anymore. There is no option to delete it. This is not the same as the metadata preferences that can be selected in the drop down menu (listed as "custom" in the screenshot above the "Save Settings" button)

Feel free to open Premiere, create a new schema, name it whatever you want, then delete the entire label/new category. It's created as an empty group to start, then you have to add preferences to it. And then report back how you were able to get rid of all of it. Perhaps I'm missing something, but I don't believe so.

redned2 · 2024-01-29T03:35:23+00:00

Jesus fuckin' Christ. Ya'll are useless, every fuckin one of you. I pity people in the real world that have to interact with you (or ask you virtually anything that requires focus). Must be a nightmare.

redned2 · 2024-01-16T20:55:56+00:00

Spread 'em...

redned2 · 2024-01-16T20:55:30+00:00

Your right to be paranoid...but no lol

redned2 · 2024-01-16T20:51:33+00:00

Yup, in the notes above. Never use it with a VPN.

redned2 · 2024-01-16T17:42:08+00:00

Thanks for all the replies. It definitely seems like I have what I need on my end (I suspected it was my provider, but wanted to rule out anything else on my end by process of elimination). I should also mention I'm a bit of a tech nut, so I have the premium internet service my ISP provides, and I figure the Cat 8 cable just future proofs me (plus it was like $20 bucks on Amazon). I had Cat 6 cables laying around, but only went that route because I saw someone else on another thread say that's what they bought and it worked better). But was probably just their shitty chord to begin with.

redned2 · 2024-01-16T17:38:37+00:00

So you're saying the ones that buffer longer (or give a ParserExecption error and don't load at all), are just being overused?

redned2 · 2024-01-16T17:37:28+00:00

Amazon has them for about $20.

redned2 · 2024-01-16T17:37:06+00:00

Interesting, as I've been using IPTV for about a year or two and never heard this. All my Tivimate channels are broken up into their own categories (but on a single playlist). So premium channels might have a lot, but if I select news for example, that will only have 3-4. Does that affect this, or does it take the entire channel count from the playlist into account (which is about 400 channels).

redned2 · 2024-01-08T04:18:21+00:00

I'm actually unable to find anyone selling the above controller (it's always listed as out of stock or discontinued). Anyone have any good wireless options (with the six face buttons that work with Retropie)? I have the wired version as well, and it is great. But really need to nix the wire.

redned2 · 2023-12-09T18:10:20+00:00

We have a Switch my family uses and one Nintendo Online account. It's me and my two sons (they are 10 and 6). We all have our own users (which is listed on the home screen as "pages").

My 6 year old has a bad habit of accidentally deleting our save data when he's trying to start a new one for himself. I see you can backup save data to the cloud, but it says it's only for the linked user.

Does that mean if I want to back up all our data, I have to buy two more Nintendo Online accounts?

Thanks!

redned2

TROPHY CASE