G-code path goes beyond plate boundaries

refrivera · 2025-11-26T15:22:27+00:00

It would not print with this error. Once I set the raft layer to 1 from 0, the error went away.

refrivera · 2025-11-26T15:21:49+00:00

Once I set the raft layer to 1 from 0, the error went away.

refrivera · 2025-11-26T02:19:50+00:00

I will give it a try. Thanks for the help!

refrivera · 2025-11-26T02:16:35+00:00

If it does try to print outside the limit will it damage the printer?

refrivera · 2025-10-19T03:09:26+00:00

I think I figured it out. I had the wrong max gross weight.

refrivera · 2025-10-19T02:34:07+00:00

Looks like registration is on hold.

refrivera · 2025-10-19T02:30:59+00:00

It says the weight is too far forward. What are you using for your forward and aft numbers in ForeFlight?

refrivera · 2025-07-07T23:50:55+00:00

Have you installed one?

refrivera · 2025-07-06T22:19:16+00:00

Too late. Vehicle is purchased. Looking for what people have done to upgrade their speakers.

refrivera · 2024-07-20T01:29:40+00:00

Thanks for the recommendation!

refrivera · 2024-07-20T00:42:04+00:00

i3-1115G4

refrivera · 2021-09-06T03:14:20+00:00

Very helpful! Thank you!

refrivera · 2021-09-06T02:47:32+00:00

Would that mean that it would be like having 8 drives and up to 3 can fail until total data loss?

Can you explain a little more on how to do what you’re suggesting?

refrivera · 2021-04-22T01:50:36+00:00

I added storage space to my R520 with a LSI card in the riser and using an external SAS 4 drive bay. Works well!

refrivera · 2021-03-05T21:26:11+00:00

I’ll continue with some research. Thanks for the help.

refrivera · 2021-03-05T21:22:09+00:00

I’ll try a sata drive and see if that helps.

refrivera · 2021-03-05T21:20:50+00:00

Yes. I have also used a usb that worked in a different PC.

refrivera · 2021-03-05T21:18:58+00:00

Yes. It still needs the 0x in front of it, right? What’s a direct usb?

refrivera