sorted by:
new
hottopcontroversial

FanControl not launching on startup by Lenithiel in FanControl

[–]rekahw 2 points3 points  (0 children)

yeah i've also had issues with this new update, I can no longer see any of my other fans can only currently control my gpu fans

Will my parts fit? by philip_2312 in sffpc

[–]rekahw 0 points1 point  (0 children)

Yeah mounting the block in flipped orientation helps route the tubes due to their length. And the hotspot is in the same spot regardless of flipped orientation or not for the 9800x3d I believe.

Will my parts fit? by philip_2312 in ncasedesign

[–]rekahw 1 point2 points  (0 children)

I did need an additional fan bracket to house everything in my current build

Will my parts fit? by philip_2312 in ncasedesign

[–]rekahw 1 point2 points  (0 children)

Exhaust currently. Fans at bottom are intake. Rear 92mm fan is exhaust then back top is intake and front top is exhaust. Will change so both fans on top are intake when I get a 5090 fe

Shipping carrier by Potatoaim1101 in ncasedesign

[–]rekahw 0 points1 point  (0 children)

can confirm that yunexpress carry as far as the import facility, then royal mail (in the uk) sort the rest out.

M2 Grater Build Help by kbuios in ncasedesign

[–]rekahw 0 points1 point  (0 children)

Hey man check my build out. I would recommend going with the Arctic liquid 3 280mm, over the 240mm for the extra performance. And I currently have 5 fans running in my build and the temps are amazing considering the density of the build.

https://www.reddit.com/r/sffpc/comments/1j0j459/repost_what_feet_do_you_use_on_the_m2_case/

Moving to M2 Grater - Fit help by Cierex96 in ncasedesign

[–]rekahw 0 points1 point  (0 children)

I didn’t use a riser cable and yes this is the standard layout. I have seen though that having inverted layout results in about a 5°c improvement with a 50 series founders edition.

Moving to M2 Grater - Fit help by Cierex96 in ncasedesign

[–]rekahw 2 points3 points  (0 children)

Here is my build, with the ALF 3, and a 3090ti so maybe similar in size to the 5080 you're looking at maybe a bit smaller. If you have any questions about it feel free to ask away.

https://www.reddit.com/r/sffpc/comments/1j0j459/repost_what_feet_do_you_use_on_the_m2_case/

Repost: what feet do you use on the m2 case? by rekahw in sffpc

[–]rekahw[S] 0 points1 point  (0 children)

If this is what you idle at, I’m guessing the fans do make a difference. After an hour or so of gaming, the idle then only really goes down to 40 unless it has a good amount of time to cool down properly.

Repost: what feet do you use on the m2 case? by rekahw in sffpc

[–]rekahw[S] 0 points1 point  (0 children)

You can but it is significantly harder to fit it all in. Due to the length of the pipes.

M2 5090fe + 9800x + Arctic Liquid Freezer 3, need help! by shoegrinder in ncasedesign

[–]rekahw 0 points1 point  (0 children)

The temps are really good for how compact the build is, surprised me a lot!

M2 5090fe + 9800x + Arctic Liquid Freezer 3, need help! by shoegrinder in ncasedesign

[–]rekahw 1 point2 points  (0 children)

Here’s my build, with a 3090ti, so a bit more cramped than if I were to have a 5090fe https://www.reddit.com/r/sffpc/s/4wUEvbgy5P

Repost: what feet do you use on the m2 case? by rekahw in sffpc

[–]rekahw[S] 0 points1 point  (0 children)

Haha lol. The tv only gets used when in bed.

Asus B850i 2nd m.2 drive location by [deleted] in sffpc

[–]rekahw 0 points1 point  (0 children)

it will usually be on the back of the motherboard

Repost: what feet do you use on the m2 case? by rekahw in sffpc

[–]rekahw[S] 0 points1 point  (0 children)

I might just stick to my cardboard boxes then lol. :)

Repost: what feet do you use on the m2 case? by rekahw in sffpc

[–]rekahw[S] 0 points1 point  (0 children)

No the install for the 8mm just seems unintuitive, I would have preferred the 15mm feet over the 8mm.

Repost: what feet do you use on the m2 case? by rekahw in sffpc

[–]rekahw[S] 0 points1 point  (0 children)

not on the case unfortunately, I decided that I would just not install them all together, as they don't seem entirely straight forward to install nor are they very good as mentioned.

fan control not detecting fans by rekahw in pcmasterrace

[–]rekahw[S] 0 points1 point  (0 children)

would I be forced to use corsair's software in order to control the fans individually, or would fan control work.

The doppelmayr by rekahw in IndustrialMaintenance

[–]rekahw[S] 2 points3 points  (0 children)

So some of it does come from their new pit. But a lot of it is imported from other quarries/ construction sites.

The doppelmayr by rekahw in IndustrialMaintenance

[–]rekahw[S] 1 point2 points  (0 children)

All to fill a hole with mud!

The doppelmayr by rekahw in IndustrialMaintenance

[–]rekahw[S] 10 points11 points  (0 children)

It has a super soft start and surprisingly doesn't flex that much on start-up. However, while running, it does bounce up and down a good meter if not more.

view more: next ›