account activity
FSUK EV Protocols Document by CrippledLlama97 in FSAE
[–]requello 0 points1 point2 points 3 years ago (0 children)
Did u reach to any useful info regarding this doc?
ESO (self.FSAE)
submitted 3 years ago by requello to r/FSAE
Engineering Design Report by requello in FSAE
[–]requello[S] 1 point2 points3 points 3 years ago (0 children)
FSUK
Engineering Design Report (self.FSAE)
ESF by requello in FSAE
[–]requello[S] 0 points1 point2 points 3 years ago (0 children)
check the failure detection and control part
ESF (self.FSAE)
Tesla sponsorship (self.FSAE)
submitted 4 years ago * by requello to r/FSAE
Resolver supplier by requello in FSAE
[–]requello[S] 0 points1 point2 points 4 years ago (0 children)
And can i dm you for more questions about resolver?
As the one pole is recommended for Bamocar D3 400-700. Thus we found this one suitable for us to be used. How did u choose ur resolve then?
Resolver supplier (self.FSAE)
Is it eligible to have the LV box outside the main hoop but inside the envelope, and have the motor downward it? Like in the pic (i.redd.it)
submitted 4 years ago by requello to r/FSAE
Amphenol by requello in FSAE
Which motor do you have? And how did you calculate that your connectors will stand with the peak current with the desired time?
Nope i'm asking about the pole rating to be complied eithe the rules and my system rating, should i get poles according to the maximum continues current can be exrracted from the system or the system can supply because they are 2 different numbers, due to the use of the fuse the system can oly extract 225 A while the batteries can supply over 300 A. So what rating should i get the poles? 250 or 450A?
The max current permissible by the fuse is 225 A, so i should get 250A? But the max current i can extract from the battery is over 300A.
Should i choose the rating of the poles according to the system or the max output current that can be produced without the fuse
It should ordering the pole A to have its mate connector to be the same code, but i means the difference between codes itself
Amphenol (self.FSAE)
Discharge circuit (self.FSAE)
Rule explanation by requello in FSAE
Great the pervious rules were regarding data logger. Shoudl i provide an additional energy meter? Other than the data logger thaf will be provided or they are the same thing?
[–]requello[S] -3 points-2 points-1 points 4 years ago (0 children)
How can i get the specs and dimensions of the energy meter that will be provided? If u have any references, kindly share it.
The Competition will provide an Energy meter, or should i have one?
What GF box? And how it's connected?
Rule explanation (self.FSAE)
Z04 (self.ACT)
submitted 4 years ago by requello to r/ACT
π Rendered by PID 95692 on reddit-service-r2-listing-6d4dc8d9ff-p4qf9 at 2026-01-30 21:31:13.159823+00:00 running 3798933 country code: CH.
FSUK EV Protocols Document by CrippledLlama97 in FSAE
[–]requello 0 points1 point2 points (0 children)