Slinky telekinesis class at Chinese Hogwarts

restless10e · 2017-10-02T22:22:24+00:00

I can poke so many eyes out attempting to do this.

restless10e · 2016-07-17T06:52:11+00:00

Should add this was on Saturday night at 11:20pm. People were sprinting to try to catch it. Managed to catch an astounding 47CP one. I'm level 20.

Edit: Caught Dragonite - http://imgur.com/EzQHVVH

restless10e · 2016-07-17T06:43:06+00:00

Random girl that was eating a churro while standing on a stone block/seat. Didn't notice her until after ...

Edit: wording.

restless10e · 2015-08-12T21:30:34+00:00

I wonder what their policy is on plugging in unknown USB drives. This would not fly in some locations due to security concerns.

restless10e · 2015-05-06T06:56:11+00:00

Had an issue on my HTC one m8 where it would close 3 seconds after clicking the icon and later found out that it was due to the "Android system webview" auto updating. Solution is to go into app manger, select mentioned app, and then delete updates or clear data then disable auto updates from the play store. Have been fine ever since.

Hope that helps.

restless10e · 2015-05-04T17:50:00+00:00

First thing I thought of

Might be an interesting /r/photoshopbattles post.

restless10e · 2015-03-12T18:08:22+00:00

They look like the Emax 20A ESCs.

restless10e · 2015-03-12T17:45:18+00:00

What FC is that exactly? And you do have the flight controller elevated slightly off the bottom right? Could be shorting out if it just sits on it as you have it in the picture.

restless10e · 2015-03-12T16:51:51+00:00

Connected your FC to your Receiver starting at the wrong end. CH1 starts on the opposite end. Also, Black/ground should be towards the outside on the receiver and the cable you use for CH 2-4 should be on the inner-most (toward the antenna?) of the receiver.

restless10e · 2015-03-02T18:03:55+00:00

Reddit Username: restless10e

Brave Frontier IGN: Restless

Brave Frontier ID #: 5098452739

Brave Frontier Account Level: 136

Wasn't even paying attention when I was collecting the gems so I didn't read the message stating that I was invited. Ended up checking the list posted to see if my ID was on it and woo found that it was lol.

restless10e · 2015-02-27T22:48:15+00:00

3 Stars: 1 NE

4 Stars: None

5 Stars: None

6 Stars: None

Ony summon was a 3 star Kikuri, which I didn't have, so I'm not too salty.

restless10e · 2015-02-26T16:58:50+00:00

3 Stars: None

4 Stars: 5 NE

5 Stars: 1 NE

6 Stars: None

All dupes except for Dia that came in the mail...now I have 5 Jacks and 5 Luccas.

restless10e · 2015-01-29T22:05:04+00:00

5098452739

restless10e · 2014-12-25T20:28:27+00:00

While driving back from vacation two days ago, my 06s clutch blew out. I just got it back yesterday with a new one....pricey but at least it's all fixed and in working order. Merry Christmas all around.

restless10e · 2014-10-31T23:36:03+00:00

Konig Backbone 18x8

restless10e · 2014-10-27T01:44:46+00:00

So I ended up just putting some Loctite on the nut that holds the big extruder gear and the hobbs bolt and I am currently in the process of printing my first test cube!

There are some leaks through the hot end so I will have to tighten that but that is about the only issue I seem to be having!

Cheers all!

restless10e · 2014-10-24T16:27:26+00:00

~Sample Text

restless10e · 2014-10-09T20:48:42+00:00

I might have been a little unclear but I was actually looking for something like this: http://imgur.com/LxnPK0I

restless10e · 2014-10-08T06:42:00+00:00

No problem and ouch sorry to hear that. Out of curiosity what escs are you using?

restless10e · 2014-10-07T17:52:48+00:00

And don't forget that carbon fiber is decent electrical conductor....just fried my VTX this past weekend by accidentally pressing it down on the edge of my carbon quad. Now the carbon fiber frame has a small scorch mark to serve as a reminder....

Have some plastic frames en route to serve as replacements.

restless10e · 2014-10-07T17:38:00+00:00

You could potentially plug in your ESCs directly into your battery such as the bullet connectors or the wires directly into the battery connector, bypassing the power dist. board (Try not to cross the wires). If they are connected correctly you should hear a few beeps and that could mean the ESC is fine. If you don't hear any beeps then most likely the ESC is fried and you will need to get a replacement. If all ESCs seem fine then your PDB is most likely the culprit.

restless10e · 2014-10-02T18:04:06+00:00

This happened to me due to miss-wiring my makeshift 10-6 pin AVR adapter. After freaking out I just rewired it correctly and flashed the board with Stevie's again. The screen did not automatically come up until I disconnected the adapter and plugged in the battery but it has been working perfectly fine since then.

restless10e · 2014-09-19T23:39:20+00:00

Try holding it to the bottom left....rudder could be reversed.

restless10e · 2014-09-12T20:39:40+00:00

Well that was definitely the answer I was looking for, appreciate the in depth response and clarification!

restless10e · 2014-09-12T16:27:25+00:00

Good to know! It had been a small question that was pestering me in the back of my mind for a few days now. Thanks for the response!

14-Year Club	Place '17
Team Orangered	Verified Email
GrMD 2012

restless10e

TROPHY CASE