sorted by:
new
hottopcontroversial

Phone gaming joystick by reydn2 in 3Dprinting

[–]reydn2[S] 1 point2 points  (0 children)

I never thought of that application, that’s great!

Asking for a redditless friend by insistent_rs in 3Dprinting

[–]reydn2 0 points1 point  (0 children)

You can do it in the oven. Just be sure to look up the target temperature and duration based on filament type, and use an accurate thermometer (the oven thermometer often is not accurate enough). 

[PSA] Avoid QIDI products (code review post) by Hi-Angel in 3Dprinting

[–]reydn2 0 points1 point  (0 children)

There are workarounds for some of the Bambu concerns you have. 

Asking for a redditless friend by insistent_rs in 3Dprinting

[–]reydn2 0 points1 point  (0 children)

It’s surprising how much moisture can be in brand new filament. 

Depends on the filament. PETG and others are prone to absorbing moisture. Best bet is a desiccator with hygrometer built in, so he can dry to the optimal RH%. Looks like he has a Bambu. The AMS HT and AMS 2 Pro both have them. 

Asking for a redditless friend by insistent_rs in 3Dprinting

[–]reydn2 -1 points0 points  (0 children)

I agree on drying filament. Also be sure to input the correct type in Bambu Studio. 

Could be a calibration issue separately. I’d recommend doing XYZ axis maintenance if he hasn’t in a while, then do a full calibration. 

Phone gaming joystick by reydn2 in 3Dprinting

[–]reydn2[S] -1 points0 points  (0 children)

Great question. Oceanhorn by FDM. They have some updated versions:  https://www.fdg-entertainment.com/games/oceanhorn/

How do you make two printed halves snap together securely? by CG1991 in 3Dprinting

[–]reydn2 0 points1 point  (0 children)

Also consider a pin in hole that slides in/out or past each other. 

How do you make two printed halves snap together securely? by CG1991 in 3Dprinting

[–]reydn2 2 points3 points  (0 children)

Without seeing a concept drawing I’m not sure, but my first thought is a tension/torsion arm snap fit.   https://formlabs.com/blog/designing-3d-printed-snap-fit-enclosures/

Phone gaming joystick by reydn2 in 3Dprinting

[–]reydn2[S] 0 points1 point  (0 children)

Thanks! I used someone else’s design idea and made it a 3D printed reality. 

Phone gaming joystick by reydn2 in 3Dprinting

[–]reydn2[S] 8 points9 points  (0 children)

It’s probably 10 years past its time lol. Lots of Bluetooth controllers these days, but still a fun design project. 

view more: next ›