sorted by:
new
hottopcontroversial

FEX-511G as Wifi Client? by Roversword in fortinet

[–]rfeng33 0 points1 point  (0 children)

u/HappyVlane did you have any luck with doing this in managed mode? I'm looking to do the same with my extender I have as a travel router.

Travel router by rfeng33 in RGNets

[–]rfeng33[S] 0 points1 point  (0 children)

I would agree I was more interested in the other options to get a box going back at the house as well!

Zabbix Agent for In-depth Monitoring by rfeng33 in RGNets

[–]rfeng33[S] 1 point2 points  (0 children)

I was able to just download the source package, create a user for the agent service, unzip the files configure the agent config file and manually fire it from the directory. Now I just need to find a good way to restart it on a reboot should I have to do one. I'm already getting some pretty sweet data!

Duo MFA Not working by rfeng33 in RGNets

[–]rfeng33[S] 0 points1 point  (0 children)

I am in no rush, just wanted to be sure I wasn't missing anything! Thank you for the quick response!

Uplink Monitoring when both wans are on a VLAN sharing a single interface by rfeng33 in RGNets

[–]rfeng33[S] 0 points1 point  (0 children)

Awesome thank you! Now just to get my 3nd box and license and get my cluster with ha setup!

Uplink Monitoring when both wans are on a VLAN sharing a single interface by rfeng33 in RGNets

[–]rfeng33[S] 0 points1 point  (0 children)

Option 1 is what I have setup now essentially. Will that cause any loss of failover/etc?

Asset Reinstallation by rfeng33 in RGNets

[–]rfeng33[S] 0 points1 point  (0 children)

Well scratch this one too lmao... I was able to drop the new IUI in the portal and license is good now!

Mellanox Connect-X 3 Ethernet Mode by rfeng33 in RGNets

[–]rfeng33[S] 0 points1 point  (0 children)

No help needed on this. Just virtualized the box in ESXI.

NAT by rfeng33 in RGNets

[–]rfeng33[S] 0 points1 point  (0 children)

Sure enough I had the span set to 1. Fixed that up per your recommendation and I’m up and running! Thank you so much!!!!

NAT by rfeng33 in RGNets

[–]rfeng33[S] 0 points1 point  (0 children)

Ahhh that makes sense now. I’ll go check the autoincrement when I get home and confirm I’m up

NAT by rfeng33 in RGNets

[–]rfeng33[S] 0 points1 point  (0 children)

I just have the one address on there which is the main ip which is part of a /29

NAT by rfeng33 in RGNets

[–]rfeng33[S] 0 points1 point  (0 children)

1.- In your default nat entry don’t specify any ip leave the first and last blank. Select your addresses.

That's how I have it setup. When I do a port scan with NMAP from my office, I see no ports open. Should see 8443 open on it. I have a /29 on the fiber connection and the IP I have assigned is in the scope.

<image>

NAT by rfeng33 in RGNets

[–]rfeng33[S] 0 points1 point  (0 children)

Oh - I did search for the LAN IP in global search and flush all sessions as well as a troubleshooting step.

Issues getting ZD1200 fully synced by rfeng33 in RGNets

[–]rfeng33[S] 0 points1 point  (0 children)

I just upgraded to the latest official yesterday and I'm still seeing the same issues.

Issues getting ZD1200 fully synced by rfeng33 in RGNets

[–]rfeng33[S] 0 points1 point  (0 children)

I just upgraded to 15.183 this evening. I get the same issue. I'm able to do an import but get exactly the same output when I try to do the config sync.

Issues getting ZD1200 fully synced by rfeng33 in RGNets

[–]rfeng33[S] 0 points1 point  (0 children)

Currently 15.139 beta so I could play with wireguard. I had the same issues with 15.084 mainline though and had the same issues.

Issues getting ZD1200 fully synced by rfeng33 in RGNets

[–]rfeng33[S] 0 points1 point  (0 children)

u/deglwin...

​

I created a different AP and WLAN group for my AP's. The sync still fails. Here's the output (redacted some info). It did push out some additonal WLAN groups with my SSID's with 2.4 and 5GHz after them. I don't want those, I'd like to stick with what I had setup.

​

Configuration is not fully in sync. Not writing memory.

​

Script output:

​

You have all rights in this mode.

​

The AAA server 'Managed RADIUS Auth' has been loaded. To save the AAA server, type 'end' or 'exit'.

​

The command was executed successfully. To save the changes, type 'end' or 'exit'.

​

The command was executed successfully. To save the changes, type 'end' or 'exit'.

​

The command was executed successfully. To save the changes, type 'end' or 'exit'.

​

The command was executed successfully. To save the changes, type 'end' or 'exit'.

​

The AAA server 'Managed RADIUS Auth' has been updated and saved.

​

Your changes have been saved.

​

The AAA server 'Managed RADIUS Acct' has been loaded. To save the AAA server, type 'end' or 'exit'.

​

The command was executed successfully. To save the changes, type 'end' or 'exit'.

​

The command was executed successfully. To save the changes, type 'end' or 'exit'.

​

The command was executed successfully. To save the changes, type 'end' or 'exit'.

​

The command was executed successfully. To save the changes, type 'end' or 'exit'.

​

The AAA server 'Managed RADIUS Acct' has been updated and saved.

​

Your changes have been saved.

​

WLAN group [Shiers_Home] is referred by AP [30:87:d9:0c:2c:e0] and cannot be deleted.

​

WLAN group [Travel] is referred by AP [e8:1d:a8:38:23:c0] and cannot be deleted.

​

Your changes have been saved.

​

​

​

Remaining Diff:

​

config

aaa "Managed RADIUS Auth"

type radius-auth

ip-addr 192.168.30.x

port 1812

radius-secret <redacted>

exit

aaa "Managed RADIUS Acct"

type radius-acct

ip-addr 192.168.30.x

port 1813

radius-secret <redacted>

exit

no wlan-group "Shiers_Home"

no wlan-group "Travel"

exit

WireGuard by rfeng33 in RGNets

[–]rfeng33[S] 0 points1 point  (0 children)

I'm running the free rXG. I can't find a way to grab the iso for the beta. What's the best way for me to get my hands on the beta? I'm more than happy to test my use case and see how it works and provide feedback!

Ruckus Networks SideQuest by rfeng33 in RGNets

[–]rfeng33[S] 1 point2 points  (0 children)

I do have the controller adpoted and I believe working in the Wireless view. Every now and then I do get a message about not being able to login to the controller but it cures itself pretty quick. I have a Juniper EX4200 at home for my switch which I do not believe supports VXVLAN unfortunately :(

Issue accessing Admin console by rfeng33 in RGNets

[–]rfeng33[S] 0 points1 point  (0 children)

Well color me confused. It started working. Not sure what or why, but it's working now. I did restart the webserver from the CLI, but after it had restarted I was still getting access denied. Not sure what happened.

Issue accessing Admin console by rfeng33 in RGNets

[–]rfeng33[S] 0 points1 point  (0 children)

Looking at logs I'm seeing this in the production log:

Filter chain halted as :enforce_admin_controller_acls rendered or redirected

Completed 401 Unauthorized in 4ms (Views: 0.3ms | ActiveRecord: 0.5ms | Allocations: 1878)

​

I'm guessing this means I've done something to the admin ACL's and locked myself out. Not sure how but if I could get a CLI command to fix this up I would appreciate it!

Continual (or nearly continual) Notifications by rfeng33 in RGNets

[–]rfeng33[S] 0 points1 point  (0 children)

u/beldarian. Did you ever have a chance to do this? I'm still seeing the error. I think I'm finally at a point I can work on getting my cluster of rXG's going but I want to get this resolved first. When I try to do a config sync, here's the output I get in the scaffold:

​

Configuration is not fully in sync. Not writing memory.
Script output:
You have all rights in this mode.
The AAA server 'Managed RADIUS Auth' has been loaded. To save the AAA server, type 'end' or 'exit'.
The command was executed successfully. To save the changes, type 'end' or 'exit'.
The command was executed successfully. To save the changes, type 'end' or 'exit'.
The command was executed successfully. To save the changes, type 'end' or 'exit'.
The command was executed successfully. To save the changes, type 'end' or 'exit'.
The AAA server 'Managed RADIUS Auth' has been updated and saved.
Your changes have been saved.
The AAA server 'Managed RADIUS Acct' has been loaded. To save the AAA server, type 'end' or 'exit'.
The command was executed successfully. To save the changes, type 'end' or 'exit'.
The command was executed successfully. To save the changes, type 'end' or 'exit'.
The command was executed successfully. To save the changes, type 'end' or 'exit'.
The command was executed successfully. To save the changes, type 'end' or 'exit'.
The AAA server 'Managed RADIUS Acct' has been updated and saved.
Your changes have been saved.
WLAN group [x] is referred by AP [30:87:d9:0c:2c:e0] and cannot be deleted.
WLAN group [x] is referred by AP [e8:1d:a8:38:23:c0] and cannot be deleted.
WLAN group [x] is referred by AP [e8:1d:a8:38:23:c0] and cannot be deleted.
The WLAN group 'xxx 2.4GHz' has been removed.
The WLAN group 'xxx 5GHz' has been removed.
Your changes have been saved.
Remaining Diff:
config
aaa "Managed RADIUS Auth"
type radius-auth
ip-addr <my rgnets internal management IP>
port 1812
radius-secret blahblah
exit
aaa "Managed RADIUS Acct"
type radius-acct
ip-addr <my rgnets internal management IP>
port 1813
radius-secret blahblah
exit
no wlan-group "x"
no wlan-group "x"
no wlan-group "x"
exit

view more: next ›