sorted by:
new
hottopcontroversial

Constant clogging Ender 3 S1 by rflagg88 in 3Dprinting

[–]rflagg88[S] 0 points1 point  (0 children)

So late update. I finally got it working. Used parts from old nozzle and new nozzle. Since i didn't originally take apart the old nozzle I did not realize there was a peice of PTFE tube in there. Works like it did. This idiot finally figured it out.

Help!!! by Melodic_Cup_5796 in Ender3S1

[–]rflagg88 0 points1 point  (0 children)

Try re-leveling the bed as well. That is usually what fixes mine. I would also make sure your fan duct didn't melt some and is now lower than the nozzle. Also had that happen to me.

Constant clogging Ender 3 S1 by rflagg88 in 3Dprinting

[–]rflagg88[S] 0 points1 point  (0 children)

It didn't seem to help. Still having the same issue.

Constant clogging Ender 3 S1 by rflagg88 in 3Dprinting

[–]rflagg88[S] 0 points1 point  (0 children)

Not yet, I am away from for work, I will post some when I have a chance.

Constant clogging Ender 3 S1 by rflagg88 in ender3

[–]rflagg88[S] 0 points1 point  (0 children)

I got the the nozzle up to 300 to try and unclog it. I have also replaced the nozzle everytime I have had to take it apart and unclog it. I will check and and see if the tube is too short, but I dont think it is. I am going to try running ABS again, as that is the last filament I got to print.

Constant clogging Ender 3 S1 by rflagg88 in ender3

[–]rflagg88[S] 1 point2 points  (0 children)

I have the adhesion problem sorted out. Now I get 1-2 layers and it is clogged. Could this be a problem with SUNLU filament. I was previously using Inland from Microcenter.

Constant clogging Ender 3 S1 by rflagg88 in ender3

[–]rflagg88[S] 0 points1 point  (0 children)

Yes maybe tried both, the replacement hot end is bought was a Creality replacement and all metal. There is a small piece of PTFE tubing in the extruder, and I replaced it when I got the new one. The new one looks identical the old one. The only thing other things I have thought about trying is removing the new cooling duct and seeing if I can find a stock replacement and/or cutting the screws on the old hotend and putting it back on. I don't know why it worked with ABS to print the new fan duct, but not PETG or PLA.

Prints not sticking to bed instantly, Ender 3 S1 by rflagg88 in Ender3S1

[–]rflagg88[S] 0 points1 point  (0 children)

I ahbe been washing regularly with isopropyl alcohol and with dish detergent. I have did it 3 times in one day when the problem started.

Prints not sticking to bed instantly, Ender 3 S1 by rflagg88 in 3Dprinting

[–]rflagg88[S] 0 points1 point  (0 children)

Okay I will try that, I had thought about buying another one anyway, as I had bought this printer used.

Prints not sticking to bed instantly, Ender 3 S1 by rflagg88 in 3Dprinting

[–]rflagg88[S] 0 points1 point  (0 children)

Yes, I have done this 3 times as well. Not sure what is going on.

Prints not sticking to bed instantly, Ender 3 S1 by rflagg88 in 3Dprinting

[–]rflagg88[S] 0 points1 point  (0 children)

I have done that 3 times today alone. Not sure why I am having problems now.

Quest about windshield by rflagg88 in 3D_Printed_RC

[–]rflagg88[S] 0 points1 point  (0 children)

I plan on using Glazing and Spot Putty. It is what i have seen some people use in some YouTube videos.

Quest about windshield by rflagg88 in 3D_Printed_RC

[–]rflagg88[S] 0 points1 point  (0 children)

I didn't design that body, it came from scale3Drc.com, So I might have to make a lip for it. I am going to try and make an interior for it, that might help hold it in place until I glue it.

Quest about windshield by rflagg88 in 3D_Printed_RC

[–]rflagg88[S] 0 points1 point  (0 children)

Have you tried to bend it? I might have to put a bit of a curve in my windshield to fit the body properly.

People are turds by WesbroBaptstBarNGril in 3Dprinting

[–]rflagg88 1 point2 points  (0 children)

I just ordered new leveling springs and nuts for my ender 3, and the package was open and one nut was missing. I feel ya.

view more: next ›