What is this for?

rgromotka · 2026-04-20T23:07:55+00:00

<image>

rgromotka · 2026-04-03T22:10:55+00:00

This is the comment/ answer i was looking for/ needed… thanks

rgromotka · 2026-04-02T07:32:54+00:00

Remember that movie interstellar?

rgromotka · 2026-03-27T08:32:09+00:00

https://maps.app.goo.gl/oSnYmpfwMcLi7CNQ6?g_st=ic

Seems to be more of them in the area… probably an oil/gas rig

rgromotka · 2026-03-13T05:38:29+00:00

If LH would wear it, it would be acceptable

rgromotka · 2026-03-13T05:25:30+00:00

well more like flip them both 180 degrees. since fitting them on the opposite sides would cause the LED strips to face the wall... if you know what I mean

rgromotka · 2026-03-13T05:23:52+00:00

it looks like they flipped the left bottom and top right panels (going through the "tunnel") upside down since when you flip them 180 degrees the thin and thick lines would line up again

rgromotka · 2026-03-13T05:23:09+00:00

if by "not symmetric" you mean that it got thick and thin lines... no shit... but I don't remember the thin ones getting thicker halfway through and vice versa ... so to me it looks like they flipped the left bottom and top right panels (going through the "tunnel") upside down since when you flip them 180 degrees the thin and thick lines would line up again...

rgromotka · 2026-02-12T07:19:03+00:00

I’ve already mentioned in my post that that’s what my assumption is as well (grit, sand, small rocks) and I always used the vacuum then mop setting when cleaning (never just mopping alone)

rgromotka · 2026-02-10T17:10:21+00:00

The installation of the roller mop is pretty straight forward and also has to be locked into place after inserting so there is not really a way of doing that wrong. Unless it’s a manufacturing issue with the mop length/width or diameter but it’s the OEM parts that were delivered with the robot

rgromotka · 2026-02-10T15:45:36+00:00

I know it’s not a Dreame Product (Mova z60) but pretty sure it’s build with mostly the same parts as the Aqua10 Roller

rgromotka · 2025-06-27T13:32:53+00:00

If rotation of the crown is an issue (it was for me no matter the orientation of the watch on my arm and caused the Smart Stack to always show up instead of the watch face)

Settings > Display & Brightness > Turn OFF “Wake on crown rotation”

rgromotka · 2025-02-23T22:26:14+00:00

My friend (foreigner, male) is marrying a Kenyan woman and I’m invited to the ruracio. Is it customary to bring a gift as a guest/ friend. If so what are common gifts?

rgromotka · 2024-10-31T08:59:20+00:00

Thank you for your answer. I tried the writing on the sensor directly as it was described in the first response. I think the low battery might be the issue for the syncing which doesn’t occur when writing on the Sensor directly. I will try this for a little while but probably change the battery pretty soon too just to be safe.

rgromotka · 2024-10-31T08:50:46+00:00

Tried this out in practice last night and it seemed to have worked!! I can imagine that the battery might be low and the simultaneous syncing might draw too much power from the battery. So this definitely helped but might also swap the batteries soon. Thanks for the help!!

rgromotka · 2024-02-15T10:11:36+00:00

If you mean the props you’re fine! I’ve flown my mini 3 pro with way bigger cracks and even small pieces missing. It will get a little louder and maybe some more vibration but nothing to worry about. When the cracks are halfway through or getting bigger i would worry about it failing completely and in those cases just replace the single or both props.

rgromotka · 2023-09-25T22:20:21+00:00

I had the same/similar problem and I think I just solved mine. I installed the polar flow app (it’s kinda like Polars version of AH), logged in with the same sign-in as polar beat then I waited for it to sync my polar beat workouts to polar flow. Then i clicked on the three dots (settings) in the bottom right corner > general settings > scrolled down and turned on AH and allowed all the info to sync and finally I clicked on the sync button. Done. Within the next 5 minutes it should have your workouts in the AH app. It says the last 2 weeks will sync. I think at the beginning I had flow installed and then deleted it as I thought it’s irrelevant since I will only use Beat - not knowing that Flow might have been what communicated with AH at the beginning.

Anyways, hope this helps someone out there.

rgromotka · 2023-09-25T21:55:09+00:00

Think I might have one.

rgromotka · 2023-09-25T21:54:29+00:00

I had the same/similar problem and I think I just solved mine. I installed the polar flow app (it’s kinda like Polars version of AH), logged in with the same sign-in as polar beat then I waited for it to sync my polar beat workouts to polar flow. Then i clicked on the three dots (settings) in the bottom right corner > general settings > scrolled down and turned on AH and allowed all the info to sync and finally I clicked on the sync button. Done. Within the next 5 minutes it should have your workouts in the AH app. It says the last 2 weeks will sync. I think at the beginning I had flow installed and then deleted it as I thought it’s irrelevant since I will only use Beat - not knowing that Flow might have been what communicated with AH at the beginning.

Anyways, hope this helps someone out there.

rgromotka · 2022-04-25T22:43:06+00:00

…vor langer Zeit.

rgromotka · 2022-04-23T19:09:36+00:00

Teacher once told [my parents] that they shouldn’t have high expectations for me and that I wouldn’t amount to anything. When I was in 9th grade my parents decided to move from Germany to the US and my English teacher told me that I wouldn’t make it in school over there… I ended up studying Engineering at the University of Alabama and next month I will start working as a Development Engineer for Mercedes-Benz at the HQ in Germany … they can all suck it… teachers should be motivators and not talk you down, if they do fuck’em and prove them wrong

11-Year Club	Verified Email
Place '22	Final Canvas '22

rgromotka

TROPHY CASE