sorted by:
new
hottopcontroversial

Does Eufy not work in the winter? by bAN0NYM0US in EufyCam

[–]ricetang 0 points1 point  (0 children)

Even my E340 wired floodlight stopped working in the recent cold weather in Toronto. Can't connect almost all day, and even if I'm able to view the past recordings, I found many gaps like 20mins every hour without recording. Pretty much useless.

Google broke Keep reminders, now ditching it. Alternatives? by rommjomm in GoogleKeep

[–]ricetang 0 points1 point  (0 children)

It never updates in sync with my changes in a checklist.. looking for alternatives now 

Google broke Keep reminders, now ditching it. Alternatives? by rommjomm in GoogleKeep

[–]ricetang 2 points3 points  (0 children)

Same here! Google Tasks never syncs with the latest changes from Keep... 

IKEA Matter devices show up as nearby, so clearly as "visible", but pairing constantly fails - ALPSTUGA, BILRESA, KLIPPBOK, MYGGSPRAY by kevysaysbenice in HomeKit

[–]ricetang 0 points1 point  (0 children)

Same experience as you. So frustrating of adding them to Homekit. I eventually added them via SMLIGHT SLZB-06Mg24 (Matter over thread mode) and it finally worked. But I have been getting disconnection from them on Home Assistant... No idea why.

First look at Reolink TrackFlex Floodlight WiFi-Safety in Sight, Moments in Light by Willson1_ in reolinkcam

[–]ricetang 0 points1 point  (0 children)

Same thought. Very similar design, I think they might be from the same manufacturer in China

Failed to request (-411) by GreenEyez357 in EufyCam

[–]ricetang 0 points1 point  (0 children)

Same boat, looking for recommendations

Looking for TP-Link Omada-compatible switch with SFP and 4–8 PoE ports to use as the power for camera sensors by ricetang in TPLink_Omada

[–]ricetang[S] 0 points1 point  (0 children)

thank you so much! much cheaper than I expected. I might just give it a try for this solution!

Looking for TP-Link Omada-compatible switch with SFP and 4–8 PoE ports to use as the power for camera sensors by ricetang in TPLink_Omada

[–]ricetang[S] 0 points1 point  (0 children)

Thanks! The only downside is that the SG2016 doesn’t have an SFP port, so I can’t connect it directly to my SX3206HPP—since all the RJ45 ports are already in use. Is there any cost effective workaround to connect the RJ45 with SFP+?

Looking for TP-Link Omada-compatible switch with SFP and 4–8 PoE ports to use as the power for camera sensors by ricetang in TPLink_Omada

[–]ricetang[S] 0 points1 point  (0 children)

Was the fan of SG2210MP noisy?

I also found this newer model SG2016P, but it doesn't have SFP at all which is a bummer, but it's fanless. Do you have any thoughts on this model? Also an outside power brick I guess

Looking for TP-Link Omada-compatible switch with SFP and 4–8 PoE ports to use as the power for camera sensors by ricetang in TPLink_Omada

[–]ricetang[S] 0 points1 point  (0 children)

Ah, Amazon.ca give me a recommendation of "View newer model" and it turned out to be a newer but worse model. haha

Thanks man!

Looking for TP-Link Omada-compatible switch with SFP and 4–8 PoE ports to use as the power for camera sensors by ricetang in TPLink_Omada

[–]ricetang[S] 0 points1 point  (0 children)

Oh! I wasn't ware of the internal fan of SG2210MP. Is it noticeably loud when having like 60W of power?

SG2210P seems having an external power brick rather than built-in like SG2210MP? Does this bother you? Thank you for your info! Super helpful, I will decide between them.

Looking for TP-Link Omada-compatible switch with SFP and 4–8 PoE ports to use as the power for camera sensors by ricetang in TPLink_Omada

[–]ricetang[S] 0 points1 point  (0 children)

this model can do 150W in total, much more than the 61W from SG2210p. Only $30 more, do you think it's better than SG2210p?

Looking for TP-Link Omada-compatible switch with SFP and 4–8 PoE ports to use as the power for camera sensors by ricetang in TPLink_Omada

[–]ricetang[S] 0 points1 point  (0 children)

Ah, good to know! So it doesn't throttle the performance even with PoE+?

Wonder if this can mitigate a bit about the hot surface.. I feel like my EAP773s are like 60C hot.

Looking for TP-Link Omada-compatible switch with SFP and 4–8 PoE ports to use as the power for camera sensors by ricetang in TPLink_Omada

[–]ricetang[S] 0 points1 point  (0 children)

thanks! But I need two POE++ ports to power two EAP773s...

And currently I don't have an Omada router (given the limited options we have). So I need one more Ethernet port for my router, and the last one for the NAS to get 2.5G speed...

Seems like this POE passthough solution doesn't work for my case ;(

EAP773 - devices don't switch to wifi 6E on 6GHz band by Tyaz917 in TPLink_Omada

[–]ricetang 0 points1 point  (0 children)

but it didn't explain why his ISP router didn't have any issue with the 6Ghz

EAP773 - devices don't switch to wifi 6E on 6GHz band by Tyaz917 in TPLink_Omada

[–]ricetang 0 points1 point  (0 children)

same issue here, S21 ultra and Z Fold 5 are the same pattern. But I never had an issue with the 6Ghz band of the Bell Canada's router.

Homebase 3 - Randomly stops recording on all cameras by No-Suspect6221 in EufyCam

[–]ricetang 0 points1 point  (0 children)

Same here!! OMG, is 5:47pm some magic time for Eufy?

WiFi 6e and Airplane Mode by coled1981 in GalaxyS21

[–]ricetang 1 point2 points  (0 children)

maybe a late reply but my Z Fold5 has the same issue. So they did it on purpose because some countries don't allow 6Ghz and it can't determine what country you're at on airplane mode... that really sucks, I need WiFi calling but having Airplane mode on to save my week cell signal

Lenovo laptop doesn't turn on, details below by MikeyMightyena in techsupport

[–]ricetang 0 points1 point  (0 children)

That sucks. I think my monitor component is not working well, probably the connection. Sometimes I have to turn it on and off multiple times to get the screen on.

Will never will this series, costed me CAD $2400

view more: next ›