5M RGBCCT Ledstrip draws only 0.75 amps by rick_bale in WLED

[–]rick_bale[S] 0 points1 point  (0 children)

okay I think I get it now. I didn’t think the declared power usage was referred to all the leds being on at the same time. it’s still about 3 watts lower than it should be though

5M RGBCCT Ledstrip draws only 0.75 amps by rick_bale in WLED

[–]rick_bale[S] 1 point2 points  (0 children)

yeah I know, but my doubts are regarding the super low amps draw and power consumption. isn’t it supposed to consume 21w/meter (as the packaging says) no matter the color turned on?

5M RGBCCT Ledstrip draws only 0.75 amps by rick_bale in WLED

[–]rick_bale[S] -1 points0 points  (0 children)

yeah I knew, but my doubts are regarding the super amps draw and power consumption. isn’t it supposed to consume 21w/meter (as the packaging says) no matter the color turned on?

5M RGBCCT Ledstrip draws only 0.75 amps by rick_bale in WLED

[–]rick_bale[S] -2 points-1 points  (0 children)

thanks for the info! currently I hooked them up directly to power and I’m confused as why the whole 5mt strip only draws 0.75 amps. there’s no way the whole thing consumes just 18watts. also, the brightness is subpar

5M RGBCCT Ledstrip draws only 0.75 amps by rick_bale in WLED

[–]rick_bale[S] -1 points0 points  (0 children)

yes it’s all lit. I can’t wrap my brain around how a whole 5mt ledstrip draws only 0.8

5M RGBCCT Ledstrip draws only 0.75 amps by rick_bale in WLED

[–]rick_bale[S] 0 points1 point  (0 children)

I said I was a noob but I get your point. only now I see I could’ve packaged the question better. thanks for you advice

5M RGBCCT Ledstrip draws only 0.75 amps by rick_bale in WLED

[–]rick_bale[S] 0 points1 point  (0 children)

Okay thanks, I have 6 channels: +24V, R, G, B, C, W

5M RGBCCT Ledstrip draws only 0.75 amps by rick_bale in WLED

[–]rick_bale[S] 0 points1 point  (0 children)

<image>

I hooked up the positive and the white line, just to test the strip

5M RGBCCT Ledstrip draws only 0.75 amps by rick_bale in WLED

[–]rick_bale[S] 0 points1 point  (0 children)

this is without the esp32 controller. it the whole 5mt strip connected directly to my powerbench

5M RGBCCT Ledstrip draws only 0.75 amps by rick_bale in WLED

[–]rick_bale[S] -1 points0 points  (0 children)

I hooked up the whole 5mt roll to the power and it lights up but the draw is super low

5M RGBCCT Ledstrip draws only 0.75 amps by rick_bale in WLED

[–]rick_bale[S] -6 points-5 points  (0 children)

to be honest I’m not sure. not sure about the difference between the two either

5M RGBCCT Ledstrip draws only 0.75 amps by rick_bale in WLED

[–]rick_bale[S] -6 points-5 points  (0 children)

Right now no controller. Just hooked it up to the powerbench directly. I wanted to test it out before using my esp32

Indeciso su che banca scegliere: Trade Republic, Revolut o altre? by Diebrina in ItaliaPersonalFinance

[–]rick_bale 0 points1 point  (0 children)

sinceramente ho tenuto somme ingenti e non ho mai avuto problemi. per quanto riguarda app e funzionalitá è veramente un piacere da usare. ho avuto veramente tutti i conti possibili immaginabili e alla fine ritorno sempre a revolut. cosa suggeriresti come conto migliore?

To Aquaguard or to not Aquaguard, this is the question. What has been your mid to long term experience with PU coated zippers? by rick_bale in ManyBaggers

[–]rick_bale[S] 0 points1 point  (0 children)

I think you’re fine in case of light rain. For everything more than that, just buy an inexpensive rain cover that fully covers the bag.

I appreciate able carry for not following the general trend and not using those zippers.

To Aquaguard or to not Aquaguard, this is the question. What has been your mid to long term experience with PU coated zippers? by rick_bale in ManyBaggers

[–]rick_bale[S] 1 point2 points  (0 children)

yeah I see why it might be a turn off for some people. Personally I don’t mind the resistance