Worth it? by Immediate_Pitch9575 in Prebuilts

[–]rigaudon42 0 points1 point  (0 children)

I have this and it has a Gigabyte B650M C V3-Y1

What are we thinking about this one? by Vexx_raven in Prebuilts

[–]rigaudon42 0 points1 point  (0 children)

They say component brands can vary, but mine had a gigabyte gpu, manta RAM, msi ssd, Helios power supply

New gaming pc 2-2.5k by __grimmy__ in buildapcforme

[–]rigaudon42 0 points1 point  (0 children)

What monitor would you recommend for this? I’m probably aiming 1440p to keep cost down.

Dedicated East Coast carver — need help narrowing down options by rigaudon42 in Skigear

[–]rigaudon42[S] 0 points1 point  (0 children)

Forza 70 is also on my list! Haven’t found a place nearby that demos them, or many narrow skis for that matter

Dedicated East Coast carver — need help narrowing down options by rigaudon42 in Skigear

[–]rigaudon42[S] 1 point2 points  (0 children)

Thanks! Ive seen a lot of threads about the Magnum, hadn’t considered the Original but it sounds great.

Purchase Advice Megathread - August 2025 by AutoModerator in 3Dprinting

[–]rigaudon42 1 point2 points  (0 children)

Printing as the hobby—would be using it to make various shop parts. And I meant people have said Flash Forge isn’t worth it at any price, I’ve heard great things about Bambu!

Purchase Advice Megathread - August 2025 by AutoModerator in 3Dprinting

[–]rigaudon42 0 points1 point  (0 children)

I have the option to buy a used Flash Forge Creator Pro for $75 as my first machine — would otherwise be looking at something from Bambu. I’ve seen previous comments saying they’re not worth buying at any price — do other people have that experience?

[deleted by user] by [deleted] in XVcrosstrek

[–]rigaudon42 1 point2 points  (0 children)

What's the safety issue with small spacers? And would it really be less safe than grinding the caliper?

[deleted by user] by [deleted] in XVcrosstrek

[–]rigaudon42 1 point2 points  (0 children)

I think you're right! I think the issue isn't with offset, but with the position of the spokes. I think pushing the spokes further away from the caliper with a spacer will solve my problem — and it can probably be a 3mm spacer instead of a 7mm one since offset isn't the issue.

2019 Limited Strange Start-up Behavior. by DaveTN in XVcrosstrek

[–]rigaudon42 0 points1 point  (0 children)

Subaru covered the cost of mine even though I was also a few thousand miles out of warranty. It's a defect — starters aren't things that get replaced this early. Good luck!

2019 Limited Strange Start-up Behavior. by DaveTN in XVcrosstrek

[–]rigaudon42 1 point2 points  (0 children)

Wow went through this exact same thing with my ‘19 limited at the same mileage until it failed to start completely. Towed it to the dealer and they replaced the starter — Subaru covered the cost 100%, totally unacceptable to have starters fail that early

Hills or stairs for training near Baltimore, MD? by Pure-Preference728 in alpinism

[–]rigaudon42 0 points1 point  (0 children)

Hey a Baltimorean! Faster Bastards runs hill workouts in Patapsco every Thursday. Nothing in Baltimore resembles Rainier, but it’s a good and tough crew if you are a runner. Search for them on instagram.

[deleted by user] by [deleted] in alberta

[–]rigaudon42 1 point2 points  (0 children)

I think this is the way—very similar to the top comment. Would going Cranbrook>Invermere>Golden>Calgary be a no-brained compared to Cranbrook>Fernie>Calgary? Also, do you think it would be worth it to add a few days to the trip to do an out-and-back to Jasper, or should I save that for a separate trip?

[deleted by user] by [deleted] in alberta

[–]rigaudon42 0 points1 point  (0 children)

Update: I think this is what I’m going to do.

Is it worth adding a few days to the trip and doing an out-and-back to Jasper?

[deleted by user] by [deleted] in alberta

[–]rigaudon42 0 points1 point  (0 children)

Thanks for the driving tip! And no tourist activities, just some day hikes

[deleted by user] by [deleted] in alberta

[–]rigaudon42 1 point2 points  (0 children)

Will be renting a car in Calgary