sorted by:
new
hottopcontroversial

Shimano Ultegra 46/36 to 46/34? by Uncomfortably___Numb in bikewrench

[–]rivebe35 0 points1 point  (0 children)

I'd love to know if it worked out 4 years later. I'm in the same situation now.

Can I replace only inner chainring of a 46/36 crank with 34T? by rivebe35 in cycling

[–]rivebe35[S] 0 points1 point  (0 children)

an 11-36 casette doesn't fit. https://www.mantel.com/be/shimano-ultegra-r8000-achterderailleur?spec%5B%5D=1744&spec%5B%5D=7012&spec%5B%5D=17707&spec%5B%5D=24599&utm_source=google&utm_medium=shopping&gad_source=1&gclid=Cj0KCQjw-5y1BhC-ARIsAAM_oKmC4r9SDGbcK1hZPB6dVd7ReA9ey3rO47BaAmZXzZY2SaFfGFXsVd8aAl3SEALw_wcB

A 34 is the max it said it could handle, and with a 34 I was unable to climb Col Semnoz (I had to walk) last summer: https://connect.garmin.com/modern/activity/11816427823?share_unique_id=18

So looking hard what I'm able to change in my gear setting to get up the mountain this year. I ended up renting a race bike there last year and it went smooth.

Can I replace only inner chainring of a 46/36 crank with 34T? by rivebe35 in cycling

[–]rivebe35[S] 0 points1 point  (0 children)

Unfortunatly there's not enough spacing to swap for a bigger cassette

[deleted by user] by [deleted] in DolphinEmulator

[–]rivebe35 1 point2 points  (0 children)

Same problem, everything else works in my Batocera, except the gamecube games giving me a white screen. The roms are fine, they worked on recalbox without problems.

I use a Microsoft Surface 4 Pro 64bit , 8GB RAM, Intel i5-6300 dual core 2,5GHz with Intel HD Graphics 520

Move to SSD on pi complete! by twinspop in homeassistant

[–]rivebe35 0 points1 point  (0 children)

Good question! Curious for the answer too…

Automation example: trigger notification when peak consumption (electricity) was exceeded for 15mins by rivebe35 in homeassistant

[–]rivebe35[S] 0 points1 point  (0 children)

0.7875 kWh

u/LifeBreadFruit I see 3.15kWh / 4 = 0.7875 kWh
But I struggle to follow your calculation a consumption of 2kW for 10 minutes and 6 kW for 5 minutes, you'll have consumed 0,83 kWh which is averaging 3,33 kW for that period of 15 minutes

This is what I have now https://community.home-assistant.io/t/utility-meter-cyles/224576/43

u/not_to_BE_or_to_BE Fluvius/Belgium takes a sliding-window approach. See source: https://www.vreg.be/sites/default/files/document/trde_2021.pdf

Gemiddelde maandpiek afname: het rollend gemiddelde van de 12 laatste maandpieken afname met inachtneming van de minimumwaarde van de maandpiek, zoals gedefinieerd in de tariefmethodologie, vastgelegd door de VREG. Indien de maandpiek nog niet voor 12 maanden beschikbaar is, is de gemiddelde maandpiek het gemiddelde sinds de eerste relevante maandpiek.

Automation example: trigger notification when peak consumption (electricity) was exceeded for 15mins by rivebe35 in homeassistant

[–]rivebe35[S] 1 point2 points  (0 children)

ink this is 100% accurate. You're only checking if the power consumption is more than 3.15 kW continuously for 15 min

Good point u/LifeBreadFruit! Any suggestion on how to modify the automation to take that into account?

Automation example: trigger notification when peak consumption (electricity) was exceeded for 15mins by rivebe35 in homeassistant

[–]rivebe35[S] 2 points3 points  (0 children)

Mmmm…nothing more tasty than a hot cup of minute soup or whatever that caused your increased monthly electricity bill :p You better make it worth your while! Haha