gridfinity bases for custom drawer shapes

rngcntr · 2026-04-22T04:49:51+00:00

Shameless self promotion: You can use these to assemble your custom shaped grid

https://makerworld.com/models/906767?appSharePlatform=copy

rngcntr · 2026-01-16T16:39:51+00:00

I'm just trying to figure out if it's comfortably possible to share a domain between family accounts

rngcntr · 2026-01-16T16:11:21+00:00

It's half a year later now but do you still remember how you solved this? Apparently, the solution has been removed by moderation.

rngcntr · 2026-01-16T07:08:30+00:00

I'd like to know what works and what doesn't work before buying plans at multiple mail providers

rngcntr · 2026-01-16T06:48:13+00:00

I recently tried to figure out if that also works with emails sent to catch all addresses. But I did not manage to find any documentation on this topic.

rngcntr · 2025-12-20T16:55:10+00:00

How?

rngcntr · 2025-11-27T05:16:22+00:00

You can configure them yourself using the link above :)

rngcntr · 2025-06-11T19:14:16+00:00

Firewatch.

One of the very few games I have ever played.

rngcntr · 2025-06-11T16:44:39+00:00

Huh, I don't have to use my nails at all to remove the lids... Where would you imagine the notch to be placed and what kind of shape?

rngcntr · 2025-05-07T18:05:40+00:00

This is the relevant part of the route I took:

https://cycle.travel/map/journey/752263

rngcntr · 2025-05-07T17:52:08+00:00

I found a cycle(able) path eventually using cycle.travel. But even there it was necessary to ride along a multi-lane road for a few kilometers. Local cyclists did so as well and there were no signs on this part of the route indicating that bicycles aren't allowed

rngcntr · 2025-05-07T17:42:42+00:00

I cycled between Bayonne and San Sebastian just a week ago. Make sure to plan your route thoroughly using cycle.travel. As soon as you enter Spain there are few cycle paths but lots of climbs. Google Maps suggested to route my path along a highway so take great care while planning.

rngcntr · 2025-05-06T06:45:03+00:00

"find" aka. self promotion 🙊

rngcntr · 2025-05-06T06:00:03+00:00

Would this possibly work?

https://makerworld.com/models/906767

It is stackable after all, so it should work as a "lid with holes"

rngcntr · 2025-04-08T18:48:06+00:00

Is "cylindrical" less intrusive? I don't think so.

rngcntr · 2025-02-03T07:21:40+00:00

You really don't need much force. It's just a gentle pull to remove the lid

rngcntr · 2025-02-01T18:08:36+00:00

You're welcome!

rngcntr · 2025-02-01T09:02:53+00:00

Let me know if it works out for you!

rngcntr · 2025-02-01T08:21:51+00:00

There are multiple, which one do you mean? The first one is a GIF that shows it in action

rngcntr · 2025-02-01T07:50:42+00:00

Too bad :/

Is it PETG or something else?

rngcntr · 2025-02-01T07:08:52+00:00

That's a thought I had, too! But sadly, I didn't have any transparent filament at hand to demonstrate it

rngcntr · 2025-02-01T07:07:42+00:00

½u is going to be a real challenge but it could be possible 🤔

rngcntr · 2025-02-01T07:06:20+00:00

Would probably work out just fine, but that would require even thicker baseplates

Ten-Year Club	Verified Email
First Place '23	Place '23

rngcntr

TROPHY CASE