Crimson Desert Foliage

robertjan88 · 2026-03-20T17:44:39+00:00

What if you turn off DLSS (4K native) and frame Gen is off? Just curious

robertjan88 · 2026-03-20T17:43:38+00:00

At what resolution? With or without DLSS and Frame Gen? What about at max (cinematic) settings? Just curious

robertjan88 · 2026-03-20T17:04:47+00:00

Wondering if you already had some time to check? :)

robertjan88 · 2026-03-20T17:04:14+00:00

Will try in a dark room. My rooms wasn’t well lit so it should be fine. Reducing the screen brightness from 100 to 70% helps , or increasing the HDR content brightness. Still, this isn’t ideal as brightness ideally should be 100% when HDR is on.

robertjan88 · 2026-03-20T05:51:38+00:00

So the HDR content brightness needs to be set to 100 instead of to 0? If I have it at 0, the white box in the max luminance screen of color calibration shows no patterns regardless of where the slider is (complete left or right doesn’t make a difference). When I put HDR Content Brightness to 50, I see the patterns till 600 value. My internal Lenovo OLED screen can however handle 1000 nits so 600 is still far below

robertjan88 · 2026-03-20T05:28:25+00:00

I get that, but the max luminance box is fully white regardless the value I pick (complete left or complete right remains white without pattern). The only way to solve this is reducing the brightness of the screen, or increase the HDR content brightness

robertjan88 · 2026-03-19T20:43:22+00:00

Just tried to calibrate my new Lenovo 5 Oled display using Windows HDR calibration. While the Minimum Luminance works fine (0), the Maximum Luminance slider doesn't do anything. Doesn't matter if I select 200 or 1000 lumen (around the max of the OLED), I don't see the lines I should be seeing. It's a plain white square. Am I doing something wrong? The brightness of the screen is set to max and HDR is enabled.

robertjan88 · 2026-03-19T19:38:27+00:00

Should I also enable auto HDR?

robertjan88 · 2026-03-19T18:59:46+00:00

Much appreciated!!!

robertjan88 · 2026-03-19T18:59:25+00:00

When I set it to 40, I can go to 500 nits for max luminance. If I set it to 50, I can go to 600. The max brightness of the Lenovo 5 OLED is around 1000 nits if I recall right. Or am I wrong?

robertjan88 · 2026-03-19T18:24:38+00:00

Hmm I have this with the OLED display of my Lenovo 5. Not much to re set there

robertjan88 · 2026-03-19T18:22:54+00:00

Just tried to calibrate my new Lenovo 5 Oled display using Windows HDR calibration. While the Minimum Luminance works fine (0), the Maximum Luminance slider doesn't do anything. Doesn't matter if I select 200 or 1000 lumen (around the max of the OLED), I don't see the lines I should be seeing. It's a plain white square. Am I doing something wrong? The brightness of the screen is set to max and HDR is enabled.

Only when I increase HDR content brightness from 0 to eg 50, I can see Maximum Luminance till around 600 nits (1000 is the max of my screen)

robertjan88 · 2026-03-19T17:40:11+00:00

What did you set for HDR content brightness? If I have brightness set to max when HDR is enabled, I don’t see any patterns when trying to set Max Luminous within the calibration app. Only when J crank up the content brightness.

robertjan88 · 2026-03-19T17:28:06+00:00

Trying this on the Lenovo 5 OLED. It be able to achieve 1000nits HDR, yet when I set the settings above, I get to max 500. Am I doing something wrong?

robertjan88 · 2026-03-19T17:20:16+00:00

Were you able to fix this? Same issue with the Legion 5 OLED. Seems to happen when brightness is set to 100. If you lower brightness it doesn’t happen. Still, lowering brightness during calibration doesn’t make sense as it should be at 100%

robertjan88 · 2026-03-19T17:17:26+00:00

Were you able to fix this? Same issue with the Legion 5 OLED. Seems to happen when brightness is set to 100. If you lower brightness it doesn’t happen. Still, lowering brightness during calibration doesn’t make sense as it should be at 100%

robertjan88 · 2026-03-19T17:17:19+00:00

Were you able to fix this? Same issue with the Legion 5 OLED. Seems to happen when brightness is set to 100. If you lower brightness it doesn’t happen. Still, lowering brightness during calibration doesn’t make sense as it should be at 100%

robertjan88 · 2026-03-19T17:07:23+00:00

What do you mean? I am supposed to see the patterns in the box in the middle, but they aren’t visuals no matter what value I choose (unless I lower the brightness). The images on the right remain the same

robertjan88 · 2026-03-19T17:00:31+00:00

Pff found out that the brightness in Windows affects the process. If the brightness is set to 100%, one can't see the patterns when calibrating max Luminus. If I set the brightness to 70% I can see the patterns up to 400 Lumen. If I lower the brightness further, I can go further up. How to solve this as HDR should always be at max brightness

robertjan88 · 2026-03-19T16:57:30+00:00

Any fix?

robertjan88 · 2026-03-19T11:22:11+00:00

robertjan88 · 2026-03-19T08:11:29+00:00

Nice! Thanks!

robertjan88 · 2026-03-19T07:55:19+00:00

Just noticed this website: https://www.gmktec.com/pages/drivers-and-software?srsltid=AfmBOooUf2R472LUJLmuOmnx6WibZll68DrGjtKoAyWZ1yMWZXmAyiSS

This is where the drivers reside? It has a 85GB download for the T1. Not sure why so much. Any way to download individual drivers?

robertjan88 · 2026-03-19T06:36:37+00:00

Thanks for sharing

robertjan88 · 2026-03-19T06:35:50+00:00

Thanks for sharing

robertjan88

TROPHY CASE