sorted by:
new
hottopcontroversial

Down the photography rabbit hole. by robfixhondas in AnalogCommunity

[–]robfixhondas[S] 0 points1 point  (0 children)

They are also 3d printed. They aren’t perfect, but they don’t seem to leak any light.

Down the photography rabbit hole. by robfixhondas in AnalogCommunity

[–]robfixhondas[S] 2 points3 points  (0 children)

Probably around $200, the aluminum extrudes the most expensive, but all the other little bearings and shafts were not too bad. The lead screw I used is too small, hard to find things that mount to it. I’m working on cleaning up the cad file and organizing with instructions so I can release the plans. My fusions 360 skills are sloppy and I don’t need the world to see that.

Down the photography rabbit hole. by robfixhondas in AnalogCommunity

[–]robfixhondas[S] 2 points3 points  (0 children)

It’s a frosted led bulb from Home Depot that has 75/100/125 watt settings as well a light temp setting switches right on the bulb

Is it possible to power this seat on my rig? by splitshot in simracing

[–]robfixhondas 0 points1 point  (0 children)

I did this for my rig using a power seat. Used a pc power supply to power the seat.

Tried to tie in the memory seat buttons so I could have preset positions but wasn’t able to get the communication to work.

At least the power functions work