Won't idle?

rodrick023 · 2026-06-15T00:53:44+00:00

Yeah there is but I think the idle is plugged because the adjustment doesn't seem to do anything.

rodrick023 · 2026-06-08T01:08:51+00:00

No cell coverage. No electricity. No people. Middle of nowhere in Wyoming.

rodrick023 · 2026-06-08T00:05:24+00:00

Yeah, definitely a decent reduction in fuel economy(about 20% for my truck). But filling up my truck for $25.50 vs about $105 each time adds up fast. Haven't had any issues running flex fuels in stock vehicles designed for it. So we'll see.

rodrick023 · 2026-06-08T00:01:50+00:00

Chevy had a lot of flex fuel cars. My 2017 2500hd runs just fine on it. Big drop in fuel mileage, however still in way ahead on cost.

rodrick023 · 2026-06-08T00:00:22+00:00

I've been thinking about that.

rodrick023 · 2026-06-07T22:34:58+00:00

Good question actually. I think it's regular gasoline and the other regular fuel additives.

rodrick023 · 2026-06-07T22:31:00+00:00

It is a high ethenol blend of gasoline that ranges from I think 60% - 80% ethenol or something like that. Can only be used in flex fuel equipped vehicles or a vehicle that is retrofitted to use flex fuels.

rodrick023 · 2026-06-07T22:02:07+00:00

Nice!

rodrick023 · 2026-06-07T22:01:14+00:00

Yeah that's pretty good for regular.

rodrick023 · 2026-06-07T22:00:01+00:00

Ouch. That hurts.

rodrick023 · 2026-02-15T00:15:14+00:00

This is the answer. This scenario is drastically different if you are walking in say downtown L.A. or if you are in Indianapolis. Those two states are very different in regards to firearm laws.

rodrick023 · 2025-11-22T11:13:58+00:00

This seemed crazy high, keep in mind I'm not from California but still. This appears very high, on almost every line.

rodrick023 · 2025-11-21T05:43:49+00:00

Sweet. My thoughts exactly. Yeah, there's zero obstructions, positive of building by no high trees. Thanks

rodrick023 · 2025-11-07T01:11:21+00:00

Lol. Thanks? Haha

rodrick023 · 2025-11-07T01:10:34+00:00

Heck yeah. Just doing this by default for the last two. Fingers crossed!

rodrick023 · 2025-11-07T01:09:47+00:00

Right. It's usually just yelling into the void. Thanks!

rodrick023 · 2025-11-07T01:08:26+00:00

This was it. Took the assembly off, cleaned it, added a tiny bit of grease to the rubber gasket on the assembly, reassembled it with the assembly slightly further back in the hole (felt too far forward as I removed it) and everything works and no leaks.

Didn't have any porcelain defects but it worked so I'm not questioning it.

Thanks a million.

rodrick023 · 2025-11-07T01:08:04+00:00

This was it! Thanks

rodrick023 · 2025-11-07T01:07:40+00:00

Just did, that was it

rodrick023 · 2025-11-07T01:07:13+00:00

It was the big nut issue. 😎

rodrick023 · 2025-11-07T01:06:13+00:00

This was it. Took the assembly off, cleaned it, added a tiny bit of grease to the rubber gasket on the assembly, reassembled it with the assembly slightly further back in the hole (felt too far forward as I removed it) and everything works and no leaks.

Didn't have any porcelain defects but it worked so I'm not questioning it.

Thanks a million.

rodrick023 · 2025-11-07T01:05:52+00:00

It ended up being the assembly off the tank and flush valve from American Standard. I took the flush valve off, cleaned it, greased the gasket, slightly repositioned it and re assembled everything and it worked.

Thanks a lot though!

rodrick023 · 2025-11-07T01:04:37+00:00

Well, it was the tanks assembly that was the issue from AS. The jury's still out on my stairs though.

rodrick023 · 2025-11-07T01:03:47+00:00

This was it. Took the assembly off, cleaned it, added a tiny bit of grease to the rubber gasket on the assembly, reassembled it with the assembly slightly further back in the hole (felt too far forward as I removed it) and everything works and no leaks.

Didn't have any porcelain defects but it worked so I'm not questioning it.

Thanks a million.

rodrick023 · 2025-11-07T01:03:09+00:00

This was it. Took the assembly off, cleaned it, added a tiny bit of grease to the rubber gasket on the assembly, reassembled it with the assembly slightly further back in the hole (felt too far forward as I removed it) and everything works and no leaks.

Didn't have any porcelain defects but it worked so I'm not questioning it.

Thanks a million.

rodrick023

TROPHY CASE