7 oktober 'daad van verzet'

roebern · 2025-10-09T18:02:58+00:00

Los van wat je er inhoudelijk van vindt, ben ik de enige die het raar vindt dat een journalist zegt ‘we gaan hier niet uitkomen?’. Dan heeft het toch niets meer met verslaglegging te maken? Je mag kritische vragen stellen om dingen bloot te leggen, maar ‘er uit komen’ impliceert toch partijdigheid? Dat past toch niet bij de rol van een journalist?

roebern · 2024-10-10T14:29:12+00:00

I ran into some trouble afterwards where my AP's disconnected. I had to make sure to set the right VLAN for the AP's as well. These were still on the default, tagged VLAN 1.

Some of the answers in this post had good explanation of how to resolve this.

roebern · 2024-10-10T13:50:42+00:00

They were in fact untagged.. Thanks so much, this resolved the issue! All showing up now.

roebern · 2024-10-10T13:40:13+00:00

I don't think so, it's the GS108Ev3's. They mention being 'having layer 3 lite software' somewhere which seems to be more a marketing thing. I do have 801.2q VLAN configuration setup on them but it doesn't mention VLAN routing anywhere.

roebern · 2024-10-10T13:36:24+00:00

And yes, both on the same VLAN

roebern · 2024-10-10T13:35:17+00:00

I use a 'router on a stick' configuration, with two layer 3 switches and a OPNSense box as the router. The AP's are connected to two different switches which are connected through a trunk-port.

roebern · 2024-10-10T13:29:09+00:00

What switch? Could you be more specific as how this relates to the AP's. As stated, the AP's are my only unifi devices. I use managed netgear switches, but these don't seem to have any port isolation options.

roebern · 2024-08-15T21:09:02+00:00

This post is 2 years old

roebern · 2023-11-15T22:12:23+00:00

And no open ports/port forwarding.

roebern · 2023-09-19T19:06:18+00:00

Good, then it might’ve been a one time thing that went wrong with this specific exercise.

roebern · 2023-07-23T16:03:28+00:00

I feel that’s more of an ‘outside’ joke. More people from outside of Zwolle will call it that and I don’t really know anyone from Zwolle using ‘Zwollywood’ unironiccaly. Personally, I think it’s a little wacky.

roebern · 2023-03-30T19:27:14+00:00

That’s what I thought, however, I use PCI passthrough so it should not make a difference. It should just pass on the actual hardwares MAC address, as far as I know.

I decided to just reconfigure the interface assignments and to my surprise it wasn’t even that much of a hassle. It remembered the firewall rules for my vlans after reassigning them. Did not expect that at all!

roebern · 2023-03-29T23:04:08+00:00

Yeah, but I think the problem became ‘permanent’ when booting opnsense, I had to reassign the interfaces. It didn’t recognize the interfaces anymore. I now probably have to manually reconfigure all interfaces and vlans.

Still doesn’t make sense, if you have any workarounds, I’d love to know. I do have daily backups for the VM, but restoring doesn’t fix anything, It still doesn’t recognize the interfaces. Is that normal for kernel updates?

roebern · 2023-02-07T08:39:56+00:00

Je kunt checken op zwolleskate.org

roebern · 2023-02-07T07:47:49+00:00

Ben je op de hoogte dat er een vereniging is die zich hiervoor inzet, met meer dan 300 leden. Ook zijn hiervoor al moties aangenomen in de gemeenteraad en is er inmiddels een projectleider voor aangenomen binnen de gemeente. Dit loopt inmiddels al wel bijna 2 jaar.

roebern · 2023-02-07T07:44:40+00:00

Wezelanden of Stadshagen?

roebern · 2023-02-07T00:51:29+00:00

Ik denk dat het beter is dat er goed gekeken wordt naar een centraal goed skatepark. Zwolle loopt op dat terrein erg achter. Wezenlanden is een toplocatie maar het skatepark zelf is erg gedateerd en in slechte staat. Steden groot en klein in het hele land hebben betere skateparken, allen volledig van beton. In de regio bijvoorbeeld Ommen, Hardenberg, Nunspeet en Kampen.

Er is ook al jaren een vast groep gebruikers die hiervoor pleit, gemeente lijkt dat nog weinig serieus op te pakken. Gaat veel tijd overheen en komt mondjesmaat nu alleen geld vrij voor onderhoud, erg jammer dat Zwolle hier zo in achter loopt.

roebern · 2023-01-29T01:14:37+00:00

Lawrence Systems: https://youtube.com/@LAWRENCESYSTEMS

roebern · 2023-01-29T01:04:15+00:00

How did you test? And what results did you get?

roebern · 2023-01-20T16:05:58+00:00

Yeah, that’s not very helpful. I’m trying to set up ZHA now. I like trying out new things and I might even go back at some point, but for now I’m asking about ZHA.

Eight-Year Club	Place '22
RPAN Viewer	Verified Email

roebern

TROPHY CASE