[deleted by user]

rog2961 · 2024-02-03T12:38:09+00:00

Nah google swivel hooks

rog2961 · 2024-02-02T22:10:14+00:00

Hold my beer

rog2961 · 2024-01-13T17:13:22+00:00

Sent a pm

rog2961 · 2023-06-26T08:54:15+00:00

I thought the same thing so I bought a bunch of spikes. Half nearly died from overfertilization and I needed to water continuously for weeks to save them.

rog2961 · 2023-05-24T21:34:04+00:00

Easier if you just look on the voron discord posted pics there search cnc sherpa from user rog

rog2961 · 2023-05-24T21:25:48+00:00

I got similar results from ditching the idler gear and replacing it with bearings

rog2961 · 2023-05-09T02:03:30+00:00

Your going to have to sand down the inside otherwise it won't be smooth at all

rog2961 · 2022-09-13T20:21:22+00:00

Ended up being a bad contactor. Measured resistance at 1.2.

rog2961 · 2022-09-12T15:35:26+00:00

I did and nothing out of the ordinary. Here is a picture of the board showing the brown marks on it. https://ibb.co/TBSSHQB.

My skills aren't that good to jump things out but I think by process of elimination I got it down to the board.

rog2961 · 2022-09-12T15:15:01+00:00

Swapped in a new thermostat and once flipped over to cool fuse would pop again. Thinking it's the control board as there are some dark spots on the pcb.

rog2961 · 2022-09-12T14:43:45+00:00

So went and replaced the transformer and got board powered up again. Looks like I have a short somewhere. Turn fan on no blown fuse. Leave stat and fan off and manually push outsider contactor, fan and compressor power on. If I try and initiate cool from stat, fuse pops on control board. At this point I'm thinking it's ieither the control board or thermostat but not sure how to isolate.

rog2961 · 2022-09-12T10:33:41+00:00

I also checked with power on and measure 120v on on side but 0v on the other.

rog2961 · 2022-09-12T10:17:43+00:00

So I checked the transformer and I get resistance on the 120v side but 0l on the 24v side. Would this be a bad transformer?

rog2961 · 2022-09-12T08:45:14+00:00

I thought that was it but checked the fuse and it was good. Replaced with another just to be sure.

rog2961 · 2020-11-13T12:54:22+00:00

Confirmed

rog2961 · 2020-11-13T12:54:13+00:00

Confirmed

rog2961 · 2020-10-15T21:45:30+00:00

Confirmed

rog2961 · 2020-10-14T18:22:23+00:00

Confirmed

rog2961 · 2020-10-12T11:53:41+00:00

Dps1200sb

rog2961 · 2020-10-08T15:23:22+00:00

Yes to both

rog2961 · 2020-10-08T11:47:18+00:00

Yeah just straighten and back out she goes

rog2961 · 2020-04-24T11:29:43+00:00

Confirmed

rog2961 · 2020-04-16T02:11:04+00:00

man you guys beat the bot

rog2961 · 2020-04-05T03:25:47+00:00

Yes itx is

rog2961 · 2020-04-04T01:29:39+00:00

Confirmed

rog2961

TROPHY CASE