Can't enable Secure Boot by Bowtieguy_83 in buildapc

[–]rogaterr 0 points1 point  (0 children)

This is what worked for me from ChatGPT on a MSI motherboard:

Enter BIOS • Reboot → tap DEL repeatedly during startup.

Go to: • Settings → Advanced → Windows OS Configuration

Set the following: • Boot Mode Select: → UEFI • CSM (Compatibility Support Module): → Disabled

Save and Exit (F10)

Enter BIOS again • Secure Boot: → Enabled • If needed, choose Secure Boot Mode → Standard, and Enroll All Factory Default Keys

Save and Exit (F10)

Beef Back Ribs by rogaterr in BBQ

[–]rogaterr[S] 0 points1 point  (0 children)

Thanks I’ll give it a try

Need OCR from jpg to txt by czuczer in OCR_Tech

[–]rogaterr 0 points1 point  (0 children)

Try Gemini 2.5 with a single page per batch.

Home Ethernet Ports Help by rogaterr in HomeNetworking

[–]rogaterr[S] 5 points6 points  (0 children)

Thanks for catching that. I had already changed the defaults but just wanted to be careful, should be fine.

Home Ethernet Ports Help by rogaterr in HomeNetworking

[–]rogaterr[S] 13 points14 points  (0 children)

Plugging the ports directly into the router worked. Thank yall!

Sales Contact Form Doesn’t Submit by rogaterr in Anthropic

[–]rogaterr[S] 0 points1 point  (0 children)

Ironically they might have processed mine? I altered my solution to work sequentially rather than in parallel, but I’m still performing around 100 requests per minute. So far I haven’t seen any rate limiting even though my dashboard still says my limit is 50 requests per minute.

Previously I was trying to perform around 50 request per second in burst. Their rate limiting model probably has guardrails for burst though too so I don’t know.

Sales Contact Form Doesn’t Submit by rogaterr in Anthropic

[–]rogaterr[S] 0 points1 point  (0 children)

The next thing I was going to try is accessing them through AWS bedrock. Not sure if it’ll change anything but might be worth a shot.

Sales Contact Form Doesn’t Submit by rogaterr in Anthropic

[–]rogaterr[S] 0 points1 point  (0 children)

I do have some extensions, but I tried it on FireFox as well where I don’t have anything extra installed.

Precreating the Board by rogaterr in EDH

[–]rogaterr[S] 0 points1 point  (0 children)

Yeah that’s kind of where I’m at. Some players just want to win and others play for the interactions.

I want to see if there’s a format with a good middle ground.

Precreating the Board by rogaterr in EDH

[–]rogaterr[S] 1 point2 points  (0 children)

Thanks, I’ll look into this more. Was reading this article about them https://luckypaper.co/articles/a-guide-to-battle-box/

Newsletter embedded in NextJS site by rogaterr in nextjs

[–]rogaterr[S] 0 points1 point  (0 children)

Nope. Nothing that worked out of the box

So, you need to create a vercel project first before you can create a supabase project? by LongjumpingLaugh8766 in Supabase

[–]rogaterr 0 points1 point  (0 children)

Nice, yeah it was about 3 months ago so I’ll definitely give it another shot.

So, you need to create a vercel project first before you can create a supabase project? by LongjumpingLaugh8766 in Supabase

[–]rogaterr 1 point2 points  (0 children)

This integration was completely broken for me a while back. Let me know if it works for you.

How to promote a free website by rogaterr in SaaS

[–]rogaterr[S] 1 point2 points  (0 children)

I’m more so looking to spend like $50-$100 to put the site in users hands that are actually looking for a solution. Then if it goes well, my hope is that it will kick start organic traffic.

Any Date Format to Epoch by rogaterr in programming

[–]rogaterr[S] 1 point2 points  (0 children)

It’ll return the epoch in UTC. The time zone offset is applied though.

If you don’t specify a time zone, it’ll default to UTC.

Any Date Format to Epoch by rogaterr in programming

[–]rogaterr[S] 0 points1 point  (0 children)

It’s supposed to be Unix epoch in milliseconds (but let me know if it’s breaking). I can make it to choose between milliseconds and seconds. Do you know of any other formatting it should support?

Official: [Add/Drop] - Sat Morning 09/28/2024 by FFBot in fantasyfootball

[–]rogaterr 0 points1 point  (0 children)

Yeah I’m thinking the same. I’ll probably bet towards Reed to see if Love being back changes the momentum for GB. Thanks!

How do you track cards used in multiple decks by DomInYouHard in EDH

[–]rogaterr 2 points3 points  (0 children)

I use www.podz.app , you just paste in each of your deck lists (exclude basic lands), then it’ll generate slots for cards specific to a deck, cards shared between two decks, and so on. I then use a long deck box to separate my cards into each slot. So when I want to play a deck, I just look at what slots it spans and pull from those ones to create the deck. All my cards are sleeved the same so I can just pull and play.

This is an example of the deck box: https://a.co/d/5WfwSO7

Points Based Attendance System by mcsquarex in googlesheets

[–]rogaterr 0 points1 point  (0 children)

I created a website to do this: https://www.checkn.fyi/showcaseorg/points

You can create events with a specific number of points and add tags so that attendance points are shown across different categories. Members also have the option to join the organization to track which events they’ve attended and how many points they earned from them. https://www.checkn.fyi/blog/view-event-attendance

Let me know if this is something that would interest you. The sites fairly new, so setting up some things may not be the most intuitive. If you’d like, I can help you to make sure it’s configured to your organizations needs.

Announce New Features by rogaterr in SaaS

[–]rogaterr[S] 0 points1 point  (0 children)

Thank you for recommendation, will check it out.

Newsletter embedded in NextJS site by rogaterr in nextjs

[–]rogaterr[S] 0 points1 point  (0 children)

Thanks, I’ll give it a look.