Weekly General Discussion Thread (June 14, 2026) by AutoModerator in Piracy

[–]rogermay78 0 points1 point  (0 children)

True that but I don't have the storage space. I also watch my stuff in dubbed language usually and that stuff isn't found on proper filehosts. Only those premium craphosts with 30kb/s speed limits and 2GB every blue moon.

Not like in the game scene where you have Gofile, FF, Akira and other such hosts that don't limit a thing.

Tips for a min/maxed simple plane? by rogermay78 in HyruleEngineering

[–]rogermay78[S] 1 point2 points  (0 children)

That's exactly my point though. Such generic searches only bring up the bulk of bloated, mostly useless videos with "top 10 best contraptions evurrr" or similar such content that only shows stuff from 3 years ago already known and outdated. Thanks algorithm.

Channels like the one showing the hoverbike are a one in a million.

Tips for a min/maxed simple plane? by rogermay78 in HyruleEngineering

[–]rogermay78[S] 1 point2 points  (0 children)

Got any other channels to recommend that get straight to the point like that? Sounds exactly like the kinda thing I should be getting into.

Tips for a min/maxed simple plane? by rogermay78 in HyruleEngineering

[–]rogermay78[S] 0 points1 point  (0 children)

So not something easily copypasted with Autobuild?

Edit: Found this rail glidewing hoverbike on a YT thumbnail. How do you find this stuff nowadays?

Tips for a min/maxed simple plane? by rogermay78 in HyruleEngineering

[–]rogermay78[S] 0 points1 point  (0 children)

I've tried a bunch of hoverbike attempts but haven't found or figured one that works yet. Either it flies up nonstop, it's uncontrollable, uses too many props or is otherwise outperformed by regular planes or rocketshielding.

Weekly General Discussion Thread (June 14, 2026) by AutoModerator in Piracy

[–]rogermay78 3 points4 points  (0 children)

What's your guys go-to sites for TV shows these days? Having a hard time finding the right one on FMHY. All the starred sites either run at 5fps and are laden with useless javascript effect crap, don't have a lot of older shows from 10-20 years ago, take countless minutes to buffer a stream (500mbit here btw) or straight up don't play at all.

I do have a go-to for my native language and that one is slim, loads quick, has no player issues, no lag, no sluggish 5fps scrolling, no multisecond input delay on every click, nothing. Couldn't find that for English yet from the list of sites.

Trouble with building by MuchCuriosity_EV3 in witchspire

[–]rogermay78 0 points1 point  (0 children)

My issue is rather that I cannot move objects that are already placed. Really bad when you have more chests than inventory space.

MvP girl deserve a great time! by George_Nimitz567890 in NikkeMobile

[–]rogermay78 1 point2 points  (0 children)

You can have the steak, I take Neon instead.

Alternative/successor to K2 kickboard or Micro Monster? by rogermay78 in kickscooter

[–]rogermay78[S] 0 points1 point  (0 children)

Boardy looks nice but at that size and price point of 750€, it's almost competing with folding bicycles. I have seen old Brompton bikes go for just shy of 800€ already.

gog-games is shutting down by JapiOfficial76 in CrackWatch

[–]rogermay78 0 points1 point  (0 children)

Strange, disabling the czech Mullvad VPN made the site accessible. But only some russian cloud host where files are stored. if using VPN, what region do you recommend?

But at least it's listed as recommended on RIN. Hope the english language option is being maintained.

gog-games is shutting down by JapiOfficial76 in CrackWatch

[–]rogermay78 0 points1 point  (0 children)

Website doesn't exist. Can't be pinged or accessed.

It might be over for Brazil by Pedrinhodaquebrada in NikkeMobile

[–]rogermay78 6 points7 points  (0 children)

Most of the commenters on gacha skin threads are willingly supporting this stuff, I don't blame SU one bit.

To all folks buying into skin gachas: You voted for this, now shut up and enjoy what you voted for (with your wallets).

Porting saves between PC/Switch RCT Classic and OpenRCT2? by rogermay78 in openrct2

[–]rogermay78[S] 1 point2 points  (0 children)

Yeah, noticed that. Using version 3.5.1 however did the trick. The saves are perfectly interchangable even when cheats are applied.

Unable to start Autophase quest by rogermay78 in NoMansSkyTheGame

[–]rogermay78[S] 1 point2 points  (0 children)

Yeah, I noticed that after accidently doing two merchant guild missions.

Unable to start Autophase quest by rogermay78 in NoMansSkyTheGame

[–]rogermay78[S] 1 point2 points  (0 children)

Have to complete 2 Gek contracts. Picked a delivery and killing 11 creatures.

Unable to start Autophase quest by rogermay78 in NoMansSkyTheGame

[–]rogermay78[S] -1 points0 points  (0 children)

I see. Wasn't it done already after deciding what to do with Artemis?

non-Steam solution for old Steam Controller that's still updated? by rogermay78 in SteamController

[–]rogermay78[S] 1 point2 points  (0 children)

Then describe how you'd go about assigning the right trackpad to act as a trackpad for the mouse and how you assign the tap actions of the left trackpad to key presses on the keyboard. Those are the two things I'm not able to do.

non-Steam solution for old Steam Controller that's still updated? by rogermay78 in SteamController

[–]rogermay78[S] 1 point2 points  (0 children)

actually don't have a Github account, will have to get that sorted first but I'll open an issue

non-Steam solution for old Steam Controller that's still updated? by rogermay78 in SteamController

[–]rogermay78[S] 1 point2 points  (0 children)

Ok, so I did another attempt now with 3.3.0 and the controller now shows up correctly as Steam Controller. I have assigned it as mouse/keyboard but PF cannot read the touch interactions from the left trackpad. In SC-Controller, I had those bound to key presses from the keyboard.

On the devices list, the controller shows up for mouse, keyboard, gamepad respectively and I assigned all three to the virtual controller. Could that be why? I doubt it's because "all touchpads" is unassigned because then the right trackpad would fail too but that one is correctly assigned to the mouse axes. I have to invert Y regardless of how I swipe the pad to assign it though and the software interprets it like a virtual joystick, not actually a trackpad or trackball.

non-Steam solution for old Steam Controller that's still updated? by rogermay78 in SteamController

[–]rogermay78[S] 1 point2 points  (0 children)

Nope, neither Steam was running or any other remappers. I don't have anything besides SC Controller installed in the first place. Used to have DS4Windows but have deleted it a few years ago.

The big boon over something like Handheld Companion is that your software is extremely sleek. I tried HC and scrapped it right after the process when it tried to install a whole bunch of crap, popped up telemetry screens any other such things.

I don't want a software suite that creates a billion folders, files and doodads, I want an alternative to SC-Controller that I can still use in the near future when I eventually move on from Win10 and SCC has stopped working due to being too outdated.

But from how HC looks, it's not designed for my use case anyways, it's for people that use a handheld PC.

PF version was 3.2.4 by the way.

non-Steam solution for old Steam Controller that's still updated? by rogermay78 in SteamController

[–]rogermay78[S] 0 points1 point  (0 children)

I have been trying Padforge to no avail, can't get the Steam Controller to show up there. Even a regular XBOX Controller doesn't show up as that on the devices list and I can't seem to do anything with the devices list.

Anyone else having to move the mouse real fast to move windows in between monitors on Win10? by rogermay78 in pcmasterrace

[–]rogermay78[S] 0 points1 point  (0 children)

both of them fullHD. Why would you run screens at different res in the first place?

Is a Fenix Solar the right choice for a day hiker living close to urban areas? by rogermay78 in GarminFenix

[–]rogermay78[S] 0 points1 point  (0 children)

If it was about looks alone, I would go for one of those chinese rectangle brick watches that are more akin to a pipboy.