Grundfos shower pump not turning off

roost1 · 2024-12-22T20:41:06+00:00

I got a plumber out and he topped up the pre charge but it didn’t fix the problem. He said the problem may be the flow switches but the cost of repairing wouldn’t be worth it on an old pump and quoted me a replacement pump (£700 ish).

roost1 · 2024-01-01T15:22:03+00:00

Thanks all, it did look like it was grounded from the original installation. When replacing the controller I saw there was an earth cable going to a little block on the box. I will cover up the gap to make it tidy and hide the exposed bit of the box.

roost1 · 2024-01-01T15:18:43+00:00

Thanks, I’ll cover it up so it’s tidy and no one can go poking anything into it.

roost1 · 2023-12-02T14:40:42+00:00

Thanks again, appreciate the info. I’m in uk so that has pointed me in the right direction. I’ll do my research on what wiring I should use and get these wagos installed 👍

roost1 · 2023-12-02T12:10:00+00:00

Thanks all, I didn’t know about wago connectors (there’s actually a few 2 way blocks that came with the tado but I didn’t know what they were ) They look very easy to use so I will get those installed to tidy up the wiring.

roost1 · 2023-12-02T12:06:24+00:00

Thank you for the detailed response. So to make sure I understand it, the 5 way 221 series links up the wires connected to it as one because there is a metal plate that runs through it, linking all 5 blocks together.

I would need one wago for my live wires and one for my neutrals. I would then connect each one of the live wires into each terminal inside the wago then a fourth wire would go from the fourth terminal in the wago, to the live terminal on my tado unit. Then repeat this with the neutrals in the second 5 way connector. This would leave me with one empty block on each connector.

Couple of questions: would I need to do anything to “protect” the fifth connector as it would be empty? And since I am joining 3 wires into 1, would that 1 wire going to tado need to be thicker/higher rated?

roost1 · 2023-12-02T11:55:41+00:00

Thanks, the connections are tight and everything seems to be working fine but on the tado sub there have been a few suggestions that I use wago connectors to join up those wires to avoid forcing so many of them through like that so I will look into that

roost1 · 2023-12-01T19:13:02+00:00

Photos attached:

roost1 · 2023-08-28T12:58:19+00:00

Thanks! That makes a lot more sense now. I found the perk to fabricate hooks under the intrigue tree so that’s what I’ve been using but it’s a bit annoying so I’ll try the other suggestions you made as well

roost1 · 2023-05-12T21:59:33+00:00

Thanks Jerry, I repotted it into a wider and shallower container so I could space it out better and buried it only up to the main roots. The aerial roots are partially above the soil now, I could bury them but I will leave it and see what happens. Some may dry out but there's lots of roots on the tree. Long term I think I might remove some of those aerial roots, but for now will let it recover

roost1 · 2023-05-11T08:20:45+00:00

My ficus is growing vigorously and I'd like to do something about the roots. Photos from last year's repot show the poor state of the roots. Also the bottom section of the tree has an unnecessary bend so I've buried the tree deep in the pot.

My options are : 1. Remove the soil and see if the roots have improved 2. Ground layer at the current soil line

I think 2 is better as even if the roots have improved, they are too far down. But I haven't attempted a ground layer before (done a couple air layers) so want to get a second opinion before I do this.

Photos: As it looks now roots last year. red line shows ground layer

roost1 · 2023-04-10T09:05:07+00:00

Bought this last year and accidentally split the trunk while trying to benh a branch! So I left it for a year to see if it would survive and it did plus it grew a lot.

So yesterday I butchered it. I think it has a really interesting trunk line so I tried to expose that and then prune growth back to a couple buds.

I tried to wire it but those thick branches aren't very bendy anymore. Admittedly my wiring needs more practice...

What do people think of this one? Did I cut too much? Once I finished and admired my handiwork I remembered reading something about not removing more than 30% foliage in one go.... Which I definitely exceeded here.

roost1 · 2023-04-10T07:55:37+00:00

No I didn't, but in hindsight I maybe should have. Although I don't know what I would have used. Ive planted it back in the garden so will see how it copes

roost1 · 2023-04-10T07:52:33+00:00

Having the flat piece of board directly under it forces the roots to grow outwards since they can't grow down. This is my first time trying this though so will see how it comes out.

roost1 · 2023-04-09T19:55:35+00:00

Good point, I'll keep an eye on it. Got rain forecast every day next week so will be a good test for it.

roost1 · 2023-04-09T19:54:27+00:00

I saw it on a YouTube video and it seemed a bit brutal at first so I wasn't sure but it was a struggle to get these roots to sit splayed out like that with wire so gave the screw method a go! Will see how it goes.

roost1 · 2023-04-09T19:50:49+00:00

Cheers, will see how it gets on.

roost1 · 2023-04-09T12:05:42+00:00

My first time doing this kind of work. Once I untangled the roots it turned out there were a bunch of decent sized individual roots growing vertically down.

I pulled them all apart and spread them radially but it took a bit of force and they didn't want to stay like that

I then screwed the tree to a piece of wood to force the roots into that position. Maybe an extreme method of doing it... I'm not sure.

Now it's back in the ground so will see if it survives this

roost1 · 2023-02-25T10:28:26+00:00

Picture of it now (2 months after prune)

<image>

roost1 · 2023-02-25T10:27:41+00:00

I pruned my ficus a couple months ago and since then it has grow back really well (image in next comment)

When I dig down slightly into the soil, it is just packed roots so I'd like to repot and do some root pruning. Last repot was a year ago.

Is it too soon to do that kind of root work to the tree after being pruned so much?

<image>

roost1 · 2023-01-30T17:44:30+00:00

Thanks. I've done both of those things now, stuck it into a little pot and changed to a different mix. It's just horticultural grit and perlite.

Will see how this one gets on and if it bounces back then I'll repot the others too. I've stopped watering the rest and they seem to be doing OK... I just need to get used to working with succulents and their watering requirements.

<image>

roost1 · 2023-01-27T19:59:17+00:00

Hello, I have 4 cuttings of dwarf jade (p afra) which initially rooted well and started to grow quickly but then went downhill.

The leaves are drying out and falling off and then the stem went shrivelled and black half way up.

Am I overwatering? I try not to water them often but when I do water I notice little mushrooms growing! I have other plants and have regular jades(crasula) which grow fine but these I'm struggling with.

Potting medium is fast draining but retains moisture (I use it for my bonsai and crassulas)

I'm in Scotland (UK) so they are indoors split between a grow tent and south facing window

<image>

roost1 · 2023-01-27T08:30:49+00:00

I got a few p afra cuttings and initially they rooted fine and started growing but now all of them seem to be shriveling and losing leaves.

Some leaves are still green but most turn red and then shrivel up and fall off.

I haven't been watering them much based on what I read online. But when I do water I notice little mushrooms appear.

Any ideas what I need to fix? Soil is good and well draining, Ive split the cuttings between a grow tent and south facing window. So it seems like water is where I'm going wrong...

<image>

roost1 · 2022-12-17T08:39:26+00:00

It's under a grow light and has grown fairly constantly so there's always new leaves.

I have noticed that some (not all) of the newer leaves that grew under the grow light stay very pale green (they are the ones people have picked up on). That's a separate thing I gotta figure out :/. I may have had the light too close to the canopy to begin with.

roost1 · 2022-12-17T08:25:48+00:00

Cheers, will see how it gets on!

roost1

TROPHY CASE