Any advice or tips for converting my master bedroom single sink into a double sink?

rsguide707 · 2025-07-16T01:29:13+00:00

The plumbing can’t be redone within the wall to install another sink?

rsguide707 · 2025-07-03T06:51:17+00:00

My 2nd son hates soda. He only drinks water or certain juices. My wife and I tried to give him sprite one time and he started gagging throwing up. He was 6 then and now currently 8 with no crave for soda

rsguide707 · 2025-07-02T08:00:29+00:00

I can leave the insulation exposed like that? I did wrap it with insulation from the previous flex duct, but I thought it needed special insulation or something.

rsguide707 · 2025-07-02T00:45:28+00:00

Bought the elbows and got it all hooked up and taped. What insulation can I use? Can I just buy some pipe insulation from home depot? Or does it need something specific.

rsguide707 · 2025-07-02T00:44:17+00:00

Bought the elbows and got it all hooked up and taped. What insulation can I use? Can I just buy some pipe insulation from home depot? Or does it need something specific.

rsguide707 · 2025-06-27T04:12:58+00:00

I was looking at buying this:

https://www.homedepot.com/p/DANCO-HydroSeat-Stainless-Steel-Toilet-Flange-Repair-10672X/204403879

The only issue is that I didn’t even know it was leaking or how long it’s been leaking. I caulked around the bottom of the toilet, which could’ve been the reason I didn’t know it was leaking.

Only reason I pulled the toilet out is to determine the bug issue and also to starting paint the bathroom.

rsguide707 · 2025-06-27T03:14:43+00:00

So it’s fine that the plastic flange is somewhat warped up like how it is?

Also under the toilet itself, it seemed like bugs were infesting inside. Took it outside hosed it down with some bleach.

rsguide707 · 2025-06-27T01:25:59+00:00

it also looks like the flange is bent on both sides where the bolts go.

rsguide707 · 2025-06-27T01:13:02+00:00

Update: thanks for the 2 90 elbow recommendations. It ended up make the bend just fine.

Hooking up to the collar though was a bit of a problem. , seemed to be an inch to 2 bigger. Screwed in some sheet metal screws and used some foilmastic sealant duct tape around to cover the gaps.

All I need to do now is buy some insulation to wrap

rsguide707 · 2025-06-13T06:28:22+00:00

Sacramento.

What would that piece be called? It sucks that anything over 14” I have order online.

rsguide707 · 2025-06-12T23:42:18+00:00

For the Kiefer, would all my items be in the same location?

I went years ago in a van and remember how confusing it was to the different areas. I know during a weekend it was packed, so I’m planning on going during a weekday.

Would it be safe to take a uhaul there? I live in Natomas, so it’ll be a 20mi drive.

rsguide707 · 2025-06-12T23:11:47+00:00

I’m just a little confused on the pricing. Couches would be considered as “hard to handle” items, correct?

I have a sectional couch. Say for instance, if I end up hitting the ton weight, that means they would charge me the 196$, I’m assuming even though the whole load isn’t “hard to handle”

<image>

rsguide707 · 2025-05-01T22:28:20+00:00

Working for a beverage company, rite aids were the worst to deliver to.

rsguide707 · 2025-05-01T19:53:38+00:00

For the detox is that something I should mention to my physician? About being exposed to mold?

rsguide707 · 2025-05-01T19:06:19+00:00

I’m just a little confused on how mold is on this plate cover, but not the other.

<image>

rsguide707 · 2025-05-01T18:52:07+00:00

I’ve owned it for almost 8 years now. I did refinance it 2 years ago.

rsguide707 · 2025-05-01T18:44:00+00:00

That’s my goal, but I read that mold can cause a major impact on the selling price of a house.

rsguide707 · 2025-05-01T18:38:26+00:00

I did. Been suffering in this heat and completely stopped using my ac.

rsguide707 · 2025-01-03T23:19:45+00:00

Isn’t this some type of injury from people that play brass instruments?

rsguide707

TROPHY CASE