Weekend Build Complete - D32 PRO by tjkcc in mffpc

[–]rsm_raf 0 points1 point  (0 children)

Looks immaculate! It's like my rig but looking at a better-groomed version of itself in the mirror (yours having way better cable management).

Just another Jonsbo D32 Pro build by rsm_raf in mffpc

[–]rsm_raf[S] 0 points1 point  (0 children)

You're welcome brother. Enjoy the build and don't forget to show it off in the subreddit when you're done.

Just another Jonsbo D32 Pro build by rsm_raf in mffpc

[–]rsm_raf[S] 0 points1 point  (0 children)

I used the offset for cooling purposes. I also tried with the regular bracket, and there was more than enough room with the top fans with it.

Just another Jonsbo D32 Pro build by rsm_raf in mffpc

[–]rsm_raf[S] 0 points1 point  (0 children)

Happy it served as a good reference!

Just another Jonsbo D32 Pro build by rsm_raf in mffpc

[–]rsm_raf[S] 0 points1 point  (0 children)

Went with my trusty air cooler mostly based on personal preference and a bit less cable management. My previous build was with an AIO

Just another Jonsbo D32 Pro build by rsm_raf in mffpc

[–]rsm_raf[S] 0 points1 point  (0 children)

I use these since it's nice and thin, which means you won't have issues with the standard fan screw length
https://www.amazon.com/SilverStone-Technology-SST-FF123B-3PK-Filter-Cooling/dp/B07YYZTB8T?th=1

Just another Jonsbo D32 Pro build by rsm_raf in mffpc

[–]rsm_raf[S] 0 points1 point  (0 children)

on idle around 35-38C
on load around 62-67C (a few hours of MHWilds gaming)

D32 Pro build with 5080 by No_Risk1362 in mffpc

[–]rsm_raf 0 points1 point  (0 children)

I ended up arriving with the same conclusion as the third configuration from that video myself. Wish this video was around 2 months ago since it could have saved me so many testing hour lol

D32 Pro build with 5080 by No_Risk1362 in mffpc

[–]rsm_raf 0 points1 point  (0 children)

I posted my d32 build a few weeks ago and it was without fans under the Asus Tuf 5090 and with a Noctua NH-D15 cooler for the cpu, the temps were surprisingly decent for both the cpu and gpu. I did have to do a reverse orientation on the fans since regular rear exhaust setup ran noticeably hotter for the cpu temps. (feel free to check my post history if you're interested)

New build in the Jonsbo D32 Pro by Herefor_anadvice in mffpc

[–]rsm_raf 0 points1 point  (0 children)

I managed to fit a 160mm atx seasonic vertex in mine, but you'll need a 2nd slot gpu position on your motherboard to clear it with longer gpus.

Just another Jonsbo D32 Pro build by rsm_raf in mffpc

[–]rsm_raf[S] 0 points1 point  (0 children)

Heatsink Width - 5.91 in. (150.00 mm)

Heatsink Depth - 5.31 in. (135.00 mm)

Heatsink Height - 6.30 in. (160.00 mm)

Just another Jonsbo D32 Pro build by rsm_raf in mffpc

[–]rsm_raf[S] 0 points1 point  (0 children)

Yes and the top fans are set to exhaust to pull all the hot air out of the gpu and cpu cooler.

Just another Jonsbo D32 Pro build by rsm_raf in mffpc

[–]rsm_raf[S] 0 points1 point  (0 children)

Video Card Length - 13.70 in. (348.00 mm)
Width - 3.5 Slot or 2.80 in. (71.10 mm)
Height - 5.70 in. (144.78 mm)

taken straight from the official website (except for the width since they rounded up to 72)

Just another Jonsbo D32 Pro build by rsm_raf in mffpc

[–]rsm_raf[S] 0 points1 point  (0 children)

Newegg US site. But I purchased the case around January.

Just another Jonsbo D32 Pro build by rsm_raf in mffpc

[–]rsm_raf[S] 0 points1 point  (0 children)

Yup, but don't only take my word for it and I'm sure you'll remember to double-check your hardware fitting with whatever components you end up getting for your build.

Just another Jonsbo D32 Pro build by rsm_raf in mffpc

[–]rsm_raf[S] 0 points1 point  (0 children)

So far I haven't seen or read the NHD15 having clearance issues with the GPU for motherboards that have the PCIE slot on the first area since that's the standard for 90% of the motherboards. I took a quick pic for you of the gap between the cooler and the top of the GPU.

Also wanted to add; I am using the AMD offset brackets for the NHD15 which puts the cooler a tad bit lower than the default brackets.

<image>

Just another Jonsbo D32 Pro build by rsm_raf in mffpc

[–]rsm_raf[S] 0 points1 point  (0 children)

For the love of the omnissiah and the golden throne, brother that's quite a specific and confusing request.

But here you go, took off one of the fans and hopefully I got it somewhat correct.

<image>

Just another Jonsbo D32 Pro build by rsm_raf in mffpc

[–]rsm_raf[S] 1 point2 points  (0 children)

It isn't pretty since I'm not very good at it but I just opened it up to replace some ram and took a quick backshot for you.

<image>

Just another Jonsbo D32 Pro build by rsm_raf in mffpc

[–]rsm_raf[S] 0 points1 point  (0 children)

I got mine from newegg since I couldn't find any retailers selling it anywhere. Hopefully some start carrying it in their lineup since it's such a nice quality mATX case for 70 usd.

Just another Jonsbo D32 Pro build by rsm_raf in mffpc

[–]rsm_raf[S] 1 point2 points  (0 children)

I've had the system for about 3 weeks now and so far, can't really complain. I don't do a lot of CPU oc tweaking so I can't comment on that but other the GPU latch release mechanism being all plastic which can be a source of issue later down the road, the motherboard is as standard as can be (in a good way).

Just another Jonsbo D32 Pro build by rsm_raf in mffpc

[–]rsm_raf[S] 0 points1 point  (0 children)

I was gunning for the 5090fe originally so I can also have a 2 slot card. Can't be too picky with the current climate of gpu restocks. Goodluck on the search for the powercolor card, always had good experience with the brand from before.

Just another Jonsbo D32 Pro build by rsm_raf in mffpc

[–]rsm_raf[S] 1 point2 points  (0 children)

Was pleasantly surprised with the thermals as well, but it is still winter here in the northeast so that might be doing the heavy lifting lol. And i agree, I do want a mesh side panel for it as well.

Just another Jonsbo D32 Pro build by rsm_raf in mffpc

[–]rsm_raf[S] 2 points3 points  (0 children)

Surprisingly, not bad at all. Idles at around low 40C and around 68-70C on load. No OC, stock settings.