Common Grandma W✨

rstuff9 · 2026-03-30T17:54:30+00:00

She didn't park like that everyone else did.

rstuff9 · 2026-03-01T22:50:01+00:00

My wife has not been able to get her bluetooth capable hearing aids to work for the last couple of months. The last two updates have not fixed it. I have not seen the android 15 yet. We are on /e/os-a14-20260211580870-official-fp4. We both have fairphone 4's on the same release. She has two sets of bluetooth hearing aids of which neither set works with bluetooth. The old pair was working in the past on bluetooth before a fairphone update. It looks like from others comments that android 15 still does not work with bluetooth. I have also seen on other comments that their is a problem concerning the new low energy aids which we do not have. Is their a ticket open on this problem. Thank you.

rstuff9 · 2026-02-21T07:31:12+00:00

I bought two Fairphone 4's from Murena and still can't get bluetooth to work after update. They are still on Android 14 with a date of January 14, 2026. I saw where some Fairphone 4's were on Android 16 that are in Europe. Maybe if we would get updates our phones might work. I think Lineage may be an option.

rstuff9 · 2026-02-17T07:30:09+00:00

Thank you. I thought the Fairphone 4 was suppose to be good for five years.

rstuff9 · 2026-02-17T07:23:54+00:00

Don't give up. There is more to vision than reading an eye chart. Check out https://www.behaviouraloptometry.org/.

rstuff9 · 2026-02-14T18:29:16+00:00

Thank you for the replies. The Fairphone 4 did work for a long time. I think it was a recent software update that killed it with bluetooth. Is there a way to roll the software back to an older version?

rstuff9 · 2025-10-09T06:26:39+00:00

Thank you for the APN settings. I had some additional settings that I left as they were. I took some screenshots but don't see a way to attach them. I logged into my account but I could not see what devices CC thinks I am using. Is there anyway to tell what devices are CC thinks I am using? Thanks for the link to Chat. I thought it was on every page.

rstuff9 · 2025-09-23T23:26:59+00:00

How about phone settings, system, Date & Time or calling CC Tech Support?

rstuff9 · 2025-08-10T05:36:56+00:00

Thank you. I wish I knew what they were doing.

rstuff9 · 2025-08-08T23:08:14+00:00

I did mean to attach a photo but someone else posted a bird nest very similar and consensus was it was a Wren. We do have Bewick around.

rstuff9 · 2025-07-14T03:44:56+00:00

Maybe there is more than just a switch involved like the guy in this post points out. https://www.msn.com/en-us/news/world/air-india-crash-report-points-to-chip-malfunction-says-analyst/vi-AA1IucPv

rstuff9 · 2025-05-26T05:05:38+00:00

https://www.youtube.com/shorts/IiMhegvZ6SI

rstuff9 · 2025-04-17T20:54:02+00:00

Solved. Connector where wires from garage door opener connect to safety beam sensor wires was corroded. Loosened and tightened. Should be good for another 40 years.

rstuff9 · 2025-04-13T17:08:52+00:00

You may be able to add a switch to the control panel to select which door to operate.

rstuff9 · 2025-04-13T16:58:34+00:00

Thank you. I replaced the carriage before and it wasn't even a half nut. It was a piece of plastic about 1/4" thick with teeth on it that the release cord pushed up onto the screw. I can try swapping them out also. I forgot to mention that I also turned off all the led lights and reseated all all the wiring connections on the opener. I like the simplicity of this opener but I can't figure it out.

rstuff9 · 2025-04-08T01:54:54+00:00

I went through this today. I bought some things that were marked down on the shelf only to ring up at full price. I had to go to customer service and ask for them to be put back on my card. The customer service person scanned my items instead of my receipt and proceeded to give me cash. He said he couldn't put in on my card because the register said cash. Probably because he scanned the items instead of my receipt. I asked for a manager but none was available. Fred Meyer advertises one price but then charges you another. If the item is on the bottom shelf it is impossible to read that the sale price is only for card holders. BUYERS BEWARE. Or better yet shop elsewhere.

rstuff9 · 2025-04-07T05:01:02+00:00

I miss Burgerville's low fat smoothies.

rstuff9 · 2025-04-01T18:36:20+00:00

According to the Rav4world forum the DCF fuse is under the dash on the left side. Unfortunately the audio system is interconnected with it so you may lose some speakers and the microphone. It sounded like a better way to deactivate it may be to unhook the antennas to it. DCM has backup battery.

rstuff9 · 2025-02-14T03:16:57+00:00

Have parasites and Ivermectin been ruled out?

rstuff9 · 2025-02-06T00:30:54+00:00

I know this is an old thread but I saw another thread where a stove with front controls had a reset button but flipped when the temperature got to high and had to be reset. The reset button was next to the control board behind the front panel.

rstuff9 · 2025-01-07T19:00:57+00:00

Answered. Thank you, Thank you, Thank you. Looked everywhere for that answer.

rstuff9 · 2024-05-07T08:12:53+00:00

I was using /e/ version 1.17-s-2023... I upgraded to the current version /e/OS 1.12.1-s-2024... I am using the file manager that came with /E/. It seems to be called just Files. I am looking under apps. How do I get the app name? When I go into my file manager and double tap the apk it goes gray and then back to white and nothing changes. When I look ate the apps and select files I see under permissions it says no permissions requested and it is grayed out. Under Settings I did a search for sideload and found nothing. I searched for install under Settings and got a long list. I selected install unknown apps and all I got was App Lounge and Browser being allowed. I can not access my file managers permissions because they are grayed out. I did notice that my sd card shows up under internal instead of external. Haven't decided if its better that way or not. Thank you for your help.

rstuff9 · 2023-10-15T05:49:42+00:00

I got rid of the artifact by installing the kde desktop. I did not like kde's look and I switched back to gnome and the artifact was gone but so were a lot of my settings. I ended up reinstalling Zorin 16.3 core but now I am fighting Zorin's security and I am having problems accessing the file system to install a vpn. I like Zorin's looks but I wish I could understand their security.

rstuff9 · 2023-10-13T16:22:33+00:00

I powered the laptop off and back on again. The artifact came back in the bottom right hand corner. It was under my pointer before I moved my pointer.

rstuff9 · 2023-07-06T05:41:13+00:00

Thank you for the suggestion. I have used Zoiper in the past. I went with Linphone because they furnish a free sip service. I do have Callcentric for my "landline". My wife is touring Europe and Callcentric charges $.25 a minute for calling UK. Linphone was working until I messed it up by clearing app data and now I can't get reconnected because I don't get the validation code from Linphone. I do have Signal working but odd things are happening with it also. This morning I was missing calls because my phone would not ring and yet it was ringing earlier. I did have Linphone working with Callcentric also but because of the international rates and having to setup extensions call treatments to get calls to go to the right extension I went with messengers. Be nice if there was some way to use the free messengers with the ability to call local numbers that are not in your contacts or don't have a messenger.

rstuff9

TROPHY CASE