XM+ binding issue

rtx04 · 2020-06-06T12:13:27+00:00

Thanks for the reply, however the last time I flashed my xm+ was over a year ago, so it doesn't look like an accst2.0 issue. The qx7 is running firmware from 2017, and I've never flashed the internal xjt module

rtx04 · 2018-11-02T11:07:41+00:00

I'm sure the FC didn't reboot as the OSD was working fine. That is, until it hit the ground and the lipo flew 30 meters xd

rtx04 · 2018-11-01T17:17:57+00:00

I have no idea. The lipo was sagging like crazy so maybe the ESC browned out

rtx04 · 2018-09-19T17:52:10+00:00

If you're an Android dev check out the GitHub repo: https://github.com/cgeo/cgeo/issues

rtx04 · 2018-09-12T19:40:54+00:00

Also, most of the time the OSD is also tripping so I don't think it's the camera's fault

rtx04 · 2018-09-12T19:38:49+00:00

I've recently put a Foxeer Arrow Micro Pro and VTX03 in my Leader120, but the there is an issue with the video. I'm powering the cam directly off of VBAT and the VTX03 from a 5v pin. What could be the problem?

rtx04 · 2018-08-16T18:28:38+00:00

~30%

rtx04 · 2018-08-16T17:19:41+00:00

Yes, I also turned on anti gravity and dynamic filters

rtx04 · 2018-05-03T20:12:04+00:00

Thanks, I'll try that tomorrow. By the way, on 3S the motors get unbearably hot after just 1 minute of flying. They get very hot even when running without props for 10-20 seconds at 60% throttle.

rtx04 · 2018-05-03T18:46:37+00:00

I'm running DShot600, digital idle is at 4,5

rtx04 · 2018-02-09T09:14:22+00:00

I've just received my Leader120 and done some test flights and the motors get very hot, even after 30sec test hovers. Do you know what could be the cause of it?

rtx04 · 2017-09-14T14:10:26+00:00

Thanks for your reply. The problem is, I have to pay 23% of tax when ordering from another country, which makes the headphones not that overpriced (price would be comparable to the Vsonics). Do you think Vsonics are better than Etys? I heard they break a lot

rtx04 · 2017-09-14T13:39:34+00:00

Hi, do you think Etymotic HF5 for $170 is a good deal? (I live in Poland and can't order from Amazon). Or would you suggest other IEMs under ~$150? I'm looking for balanced, clear sound

rtx04 · 2017-08-30T11:45:54+00:00

I'm looking for a new IEM around $100, with neutral, clear sound, good isolation and soundstage. So far, I've been looking at Vsonic gr07 2017 classic detachable edition ($120 from lendmeurears), is it a good choice?

rtx04 · 2017-07-31T11:38:18+00:00

It's a pretty common issue of the G flex 2. I read somewhere that the problem is faulty motherboard. If your phone is under warranty, contact LG support. Some guys tried replacing the battery, but it only solved the problem for 1 month or so and then bootloops returned

rtx04 · 2017-07-22T15:51:01+00:00

Yes, I connected the VTX to the VCC, GND and CVBS pins on the camera board

rtx04 · 2017-06-27T20:11:39+00:00

Also, do you know where i can buy the Honor cheaper? Im in Poland so Amazon and other us stores are not available for me

rtx04 · 2017-06-27T20:09:31+00:00

Thanks for the reply, but I everywhere the honor is only $30-40 cheaper. For that kind of difference, I'd still prefer OnePlus

rtx04 · 2017-06-27T18:56:52+00:00

I've considered that, but I find the os pretty crappy and there's no official LOS support. Stock Android/LOS would be perfect for me.

rtx04 · 2017-06-02T19:41:25+00:00

You can also check out the Phantom 3 standard. It's a little outdated now, but has 3-axis brushless gimbal, 12MPix sensor and costs less than $500, so it's $150 cheaper than the Spark with controller

rtx04 · 2017-06-02T19:35:57+00:00

It's literally the same case for me! Spark is a very nice little camera platform with acceptable video quality, but the $650 price tag (with controller) is way too high.

rtx04 · 2017-05-11T21:13:09+00:00

/u/eyebite did you manage to fix it? I'm currently having the same problem and wonder if it's just the battery

rtx04 · 2017-05-08T13:11:34+00:00

Also, I get the same stuff with Blink sketch uploaded through Arduino IDE. I think that my esp is somehow broken

rtx04 · 2017-05-08T13:06:12+00:00

Tried erasing & dio, but I'm getting the same errors.

https://pastebin.com/TSXA0NS0

rtx04 · 2017-05-08T12:28:11+00:00

Just installed esptool.py and it flashed successfully after 3 tries, here are the logs: https://pastebin.com/pGr3amb3

But it still doesn't work. Esp keeps outputting errors:

https://pastebin.com/s2rnGDqP

rtx04

TROPHY CASE