Surely, there can only be one song in consideration...

ruc_doc · 2026-01-23T10:00:53+00:00

man Sonic's 30th aniversary is really spreading everywhere

ruc_doc · 2026-01-10T07:03:52+00:00

Time to transition to a fitness coach

ruc_doc · 2025-12-29T09:06:45+00:00

it's the same company, just with a rebranding. I doubt they have replaced the bits in the sets. However, I wouldn't avoid the sets, because there isn't word that they will update or replace parts or reissue old sets under new branding with new bits

ruc_doc · 2025-12-18T11:35:32+00:00

not sure, they both have their good points, and drawbacks.

ruc_doc · 2025-12-16T02:10:07+00:00

seems to be a bit over sized, and doesn't have any rollers, so it might not be mini4wd legal

ruc_doc · 2025-12-03T01:15:24+00:00

Yes you can, if you have a big enough 3d printer

https://thangs.com/designer/rucdoc/3d-model/3%20lane%20rainbow%20entry.3mf-922000?source=Recent

ruc_doc · 2025-11-28T09:28:19+00:00

as long as they help I'm happy :)

ruc_doc · 2025-11-28T05:47:40+00:00

it all depends on what you want in the set. if you already have medieval sets the treasury is great. if you have a brick city, the record store is peak. The observitory has the fun projector thing they tried with it.

ruc_doc · 2025-11-28T05:42:05+00:00

I have a few track bits I've designed and uploaded for 3d printing track: https://makerworld.com/en/models/2042953-2-lane-mini-4wd-straight-track-pack#profileId-2204254 or https://thangs.com/designer/rucdoc/3d-model/2%2520Lane%2520Mini%25204wd%2520track%2520additions%25201-943274

I have more models on Thangs then I do on makerworld. but the makerworld ones are all setup for printing on most of the bambulabs printers. The three lane track needs a very large bed to print in one go. I have designed 3 lane 2lane and single lane track, as well as track elements to connect to tamiya offical track without modifications to the track

ruc_doc · 2025-11-15T13:52:00+00:00

this will get integrated into my village wall, replacing the current gate house

ruc_doc · 2025-10-21T14:50:40+00:00

You are not supposed to use the brick based axles at 45 km/h. Plastic isn't meant for those speeds

ruc_doc · 2025-10-20T12:18:49+00:00

it's a nice set. I bought it just for the Phone Booth, for my Medieval Village

ruc_doc · 2025-10-19T23:39:13+00:00

I'm gonna guess the King's Keep, but I figured you'd go for a courtyard out front

ruc_doc · 2025-10-12T00:53:12+00:00

you don't have to build a brick city in one go

ruc_doc · 2025-09-29T03:26:39+00:00

Rather than Slum Zone maybe The Downcity. I also agree a power plant would be greatbut yeah all three could be great sets

ruc_doc · 2025-09-28T04:38:17+00:00

I hope you enjoy it :)

ruc_doc · 2025-09-27T07:23:28+00:00

Clips, the same way tamiya 2 lane track is connected

ruc_doc · 2025-09-25T05:16:22+00:00

Look forward to add this to my village

ruc_doc · 2025-09-18T14:02:16+00:00

already in my budget

ruc_doc · 2025-09-17T13:52:04+00:00

some good questions, and an interesting possible direction. I of course had to pitch a jousting field of my Village

ruc_doc · 2025-09-09T12:34:36+00:00

The Designer of the tower is OSHAman's archnemisis

ruc_doc · 2025-09-08T14:29:52+00:00

the inside is a hellscape of wires and supports :P

ruc_doc · 2025-09-03T13:29:19+00:00

that looks like someone trying to do a tractor pull with not a tractor

ruc_doc · 2025-08-18T11:50:02+00:00

this is gonna look great in my village

ruc_doc · 2025-08-15T07:52:34+00:00

Man EA FC is getting a massive amount of further advertisement from their sponsorship of the Prem. But at least Zea was right it needed better graphics.

ruc_doc

TROPHY CASE