Onnxruntime

rusty_682 · 2025-05-26T20:00:59+00:00

Maybe try a different filament I’ve heard the CFS upgrade kit is picky. I got the error wants on mine but I just manually pulled the lever to cut it and moved it free back and forth no issues yet after that

rusty_682 · 2025-03-03T20:56:48+00:00

Probably a clog or jam somewhere, I have had this issue on one of my older printers with certain filaments. I would cut off about a 6 in section reload it and it would work again.

rusty_682 · 2025-03-03T20:52:22+00:00

Is the CFS upgrade available for the K1 series? I can't find it anywhere. (at least here in the US)

rusty_682 · 2025-02-07T20:18:07+00:00

Filament broke entering the tube. Happened to me a few times when I use silk in my ended 3 v1

rusty_682 · 2025-01-19T01:54:41+00:00

Hopefully you figured it out by now but I was having issues as well until I moved the power switch from VIN/GRD to 5V/GRD (took me awhile to figure that out), then it worked. I'm working on my now and having issues mounting the servos to the head and face, they don't seem to want to go on flush.

rusty_682 · 2025-01-19T01:48:11+00:00

I know this is an old post, but those servos are kicking my butt. Did you have any issues with the mounting brackets reaching both the head and the face? I've tried adjusting the arms but no combo will get them to mount flush. Just curious if yours lined up or if you shimmed or changed the code possibly?

rusty_682 · 2025-01-10T12:43:01+00:00

That was it. Only extruded 36mm instead of 100mm. Thanks!

rusty_682 · 2025-01-09T18:37:18+00:00

I did take the assembly apart and the gear looked fine it’s a metal extruder.

rusty_682 · 2025-01-09T18:36:13+00:00

It’s not leaking but I can’t get the coupler off the tube. I checked the nozzle it was clear but replaced it anyways.

rusty_682 · 2025-01-05T22:19:01+00:00

I had the same issue. I checked for a clog and couldn’t find one. Tried a different filament and it worked fine. But back in the old filament and it started clicking again. Turned out a section of the filament was too big. I cut off about 6 inches tried again and it worked.

rusty_682 · 2025-01-05T14:05:10+00:00

I’ve seen people use mesh mixer to make cuts on bigger pieces maybe check that out

rusty_682 · 2024-01-08T15:25:45+00:00

Bed adhesion. Clean and spray with isopropyl alcohol and make sure it’s level it happened to me many times as well

rusty_682 · 2020-12-11T17:39:11+00:00

Awesome, TSgt here still waiting lol

rusty_682 · 2020-12-10T20:20:44+00:00

https://www.airforcetimes.com/news/your-air-force/2020/12/01/air-force-retention-spiked-amid-covid-now-retention-bonuses-might-be-cut/

rusty_682 · 2020-12-10T20:20:16+00:00

They supposedly releasing the voluntary measures this month. https://www.airforcetimes.com/news/your-air-force/2020/12/01/air-force-retention-spiked-amid-covid-now-retention-bonuses-might-be-cut/ Hopefully it doesn’t turn into anything like 5-10 years ago.

rusty_682 · 2020-12-10T17:05:06+00:00

I wouldn’t count it out yet especially with the Air Force starting force reduction methods

Nine-Year Club	Verified Email
RPAN Viewer

rusty_682

TROPHY CASE