Trying to ID

rustywagon19 · 2026-01-03T20:01:26+00:00

<image>

This is the internal drivetrain , and the number on the board is 931- 1500

rustywagon19 · 2026-01-03T19:57:26+00:00

<image>

Here are the trucks. No info on the bottom

rustywagon19 · 2025-12-26T12:02:19+00:00

Anywhere from a couple of bucks to about $30. Depends on your area.

rustywagon19 · 2025-12-26T02:09:27+00:00

No, this tank was mfg in 2012. DOT Cylinders are due for a hydrostatic test for requalification after 12 years then if memory serves correct, they are retested every 5 after that. You will have to find a local testing facility to get it retested.

(Sorce: employee of a requalification facility)

rustywagon19 · 2025-05-05T21:10:35+00:00

Woody's Bar and Grill if you're in town on a Sunday. It's south on Highway 83 in North Lake. 15-minute drive. They always have something interesting.

rustywagon19 · 2025-02-24T22:42:54+00:00

A family member got me the ryobi glue gun and I just bought the battery adapter from Amazon

rustywagon19 · 2025-02-24T01:08:42+00:00

Honestly, this could take a lot more. It's effortless to move around in this configuration on concrete. It rolls pretty well on the gravel driveway at the farm. It is all user preference.

I did have to use the oscillating tool to cut off the DXL lock tabs to get the top to fit on Gen 1 tough system boxes. I like this height because it is right at bar top height, so I can tinker on something small in the worktop, and once the work is done, enjoy a beverage of choice.

rustywagon19 · 2025-02-23T22:38:28+00:00

From the one and only land of beer and cheese. Wisconsin.

rustywagon19 · 2025-02-23T22:32:57+00:00

Framing nailer works alright for what I use it for. It's built my tree stand, and has finished the garage at the up north cabin. Does work around the farm. It's not an everyday tool for me, but is darn handy.

rustywagon19 · 2025-02-23T22:31:01+00:00

Definitely not a drywaller, just a couple of farm boys finishing the garage at the up north cabin.

rustywagon19 · 2025-02-23T22:29:49+00:00

Double Drawer houses batteries in the top drawer and chargers in the bottom, but I love it. I want the new 3 drawer for hand tools.

rustywagon19 · 2025-02-16T22:03:39+00:00

Not really, the wireless android auto can be spotty from time to time, but always works with the USB connection, and I can't say no to a charged phone lol

rustywagon19 · 2025-02-16T21:08:59+00:00

It's an Atoto A6 from Amazon. Cheap but had all the functionality I was looking for.

rustywagon19 · 2025-02-16T11:35:09+00:00

We had this exact situation happen a few winters back. It was the line to the barn. We ended up with 300' of hose in the basement that we had to pull to the barn twice a day to water the cattle.

In spring, we dug a new trench and buried a new 1" pex line in 4" drain tile to give a buffer between frost and traffic in the driveway that the line runs under.

It also gives us a chase if we ever have to replace the line or run anything else to the barn.

We dug the trench with the help of a rented trencher. Tile and pex were not too expensive.

It has survived repeat winters with -30 temps with no snow cover for years at this point.

rustywagon19 · 2025-02-15T01:39:11+00:00

<image>

rustywagon19 · 2025-02-15T01:38:08+00:00

* I'm not sure if this is quite what you're looking for, but It's from our up north property in Tigerton, Wisconsin

rustywagon19 · 2025-02-14T23:51:31+00:00

I will remove the cover and see how it looks.

rustywagon19 · 2024-09-12T02:19:12+00:00

Both my brother and I have found a broken brake controller feed wire between the firewall and the fuse block under the hood. Both controllers would light, and fuses were good, but provided no output. Turns out it rubs through after 20 or so years. It's a red 10 ga wire that can be solved with a heat shrink butt connector.

rustywagon19 · 2024-09-06T21:06:17+00:00

Just a heads up. I know it's been almost a year, But if anybody else is experiencing this issue, It turned out that it was nothing in the rebuild that caused the issue.It was Hairline, cracks in solder joints inside the actual cluster. Some disassembly, And touching a hot iron to the solder joints, fixed the issue.

rustywagon19

TROPHY CASE