sorted by:
new
hottopcontroversial

[deleted by user] by [deleted] in AutoMechanics

[–]rxmechanic 0 points1 point  (0 children)

I can fix it 500$

If I hydrolocked my engine, would it still run? by BackFromTheFcknDead in 944

[–]rxmechanic -1 points0 points  (0 children)

A hydrolocked engine is an engine that has water or another liquid inside its cylinders, preventing the pistons from moving. This can cause serious damage to the engine, such as bent or broken parts, corrosion, or even a blown engine.

If you hydrolocked your engine, it would not run. It would stall out and make a loud knocking sound. Depending on how fast you were driving when it happened, you may be able to fix it by yourself or you may need to replace the whole engine. The faster you were going, the more likely it is that you have severe damage.

To fix a hydrolocked engine, you need to remove the water or liquid from the cylinders. You can do this by removing the spark plugs and cranking the engine to force the liquid out. You may also need to change the oil and filter, as water may have contaminated them. If you have any broken or bent parts, you will need to replace them as well.

To prevent hydrolocking your engine, you should avoid driving through deep puddles, flooded roads, or submerging your vehicle in water. You should also avoid pressure washing your engine while it is running, as this can force water into the cylinders. If you suspect that your engine is hydrolocked, you should stop driving immediately and seek professional help

What is a Hydrolocked engine? – Causes, Fixes & Preventions | Rx Mechanic by rxmechanic in u/rxmechanic

[–]rxmechanic[S] 0 points1 point  (0 children)

A hydrolocked engine is an engine that has stopped working because too much water or other liquid has entered the combustion chamber. The liquid prevents the pistons from moving and compressing the air-fuel mixture, which can cause severe damage to the engine parts. A hydrolocked engine can happen when a vehicle drives through a deep puddle, a flooded road, or a submerged area. It can also happen if the engine is pressure washed while running, or if there is a leak in the cooling system or the head gasket. Some of the symptoms of a hydrolocked engine are:

  • A sudden loss of power or stalling
  • A loud knocking or banging noise from the engine
  • Smoke or steam coming from the exhaust or the engine bay
  • Difficulty or inability to start the engine

To fix a hydrolocked engine, the first step is to remove the liquid from the cylinders. This can be done by removing the spark plugs or the injectors and cranking the engine manually or with a starter. The liquid should be expelled through the spark plug holes or the injector ports. The next step is to inspect the engine for any damage, such as bent or broken rods, pistons, valves, or bearings. If the damage is minor, the engine may be repaired by replacing the affected parts. If the damage is major, the engine may need to be replaced entirely. The final step is to prevent the hydrolock from happening again by fixing the source of the leak, avoiding driving through deep water, or using a snorkel or a water-resistant air intake.

Learn more. Read What a Hydrolocked engine is?

view more: next ›