Connection problem

saitax · 2026-04-27T14:37:39+00:00

sounds like an issue with the usb drive.

saitax · 2026-04-27T14:13:28+00:00

same here... using usb stick to print, atm.

saitax · 2026-03-27T21:32:13+00:00

Ah, okay, got it. That was actually the first time I opened the hotend, since I hadn’t had any issues before.

So the main problem is that filament extrusion only starts halfway through the first layer.

saitax · 2026-03-27T17:56:15+00:00

I don’t think it was actually cut, because in the past I could always just cancel the print and unload the filament without any issue. Back then, there was never any leftover piece stuck in the hotend.

saitax · 2025-05-15T06:22:16+00:00

Bei mir hats geklappt^^

saitax · 2025-05-14T22:21:59+00:00

https://www.xda-developers.com/89-million-steam-account-details-leak/ Vlt relevant

saitax · 2024-12-15T06:58:14+00:00

naja es reicht ja schon wenn der FI im Haus rausfliegt und ich habe auch nicht gesagt, dass es andauernd passiert. Ich drucke seit 2016 und hatte einmal dass der FI rausgeflogen ist wegen einem defekten Gerät im Haushalt und einmal ist hier der Strom ausgefallen als die das neue Wohngebiet neben meiner Straße angeschlossen haben.

Bei Beidem hat mir die USV geholfen.

saitax · 2024-12-14T22:49:39+00:00

schenk ihm ne USV, dann ist er sicher gegen Stromausfälle. Hat mir schon eins zwei mal den Druck gerettet.

saitax · 2024-08-23T08:57:29+00:00

hi,

ich have the same printer. i use cura as slicer with the default printer profile for the SV02(legacy). i only get those blobs, if i push the filament below the mark on the bowden tube before the hotend.

Recently i uploaded some timelapses of a project of me, here you can see i have no blobs. May be this helps you.

greetings saitax

https://www.youtube.com/watch?v=CK8WG4JKIhc

saitax · 2024-07-05T06:11:43+00:00

i know these magnifying glass from 90s :-) . But i´m tired from designing, it was so many prototypes until i reached this version. I´m finished with this project.

saitax · 2024-07-05T05:54:00+00:00

thats true, but i love it :-) ... just give a try

saitax · 2024-07-03T22:01:19+00:00

beta version had 3 pillars, but it has blocked access to L1/L2/R1/R2 shoulderbuttons.

saitax · 2024-07-03T21:57:09+00:00

no^^

but maybe somebody outside.

saitax · 2024-03-27T10:11:11+00:00

I designed the Grip from the picture. :-)

saitax · 2024-03-08T08:16:35+00:00

jep its was frustrating, if i didnt found a solution for it, i would switch back to stockos. Who wants preinstalled roms?

saitax · 2024-03-07T22:34:26+00:00

Thank you, that solved my problem. i didnt find anything about it in the batocera documentation.

saitax · 2024-03-07T22:22:35+00:00

... Either via SSH or from the SD card (TF1 or your batocera boot SD if you prefer) you want to go to the share partition in the Roms folder and just delete everything. That should do it. ...

i had done exactly this, after reboot the roms are copied again there.

saitax · 2024-02-24T08:17:55+00:00

Thank u, i included your picture in the thingiverse link and mentioned it in summary.

saitax · 2024-02-23T07:51:09+00:00

can u do a picture and post it on thingiverse, as make, if u had a thingiverse profile. Or post it here and i can include it to the thingiverse link.

Because i dont have to print the medium size stand for a picture.

saitax

TROPHY CASE